Angular Variation Research Articles

The Asymmetry Within: A Renewed Look at Cupids Bow in Unilateral Cleft Lip.

The purpose of this study is to analyze the angular variations within Cupid's bow in patients with unoperated unilateral cleft lip (UCL). Angular features of Cupid's bow were quantified in standardized presurgical photographs of children with UCL by 5 medical professionals specializing in craniofacial anomalies. The peaks and valley of Cupid's bow were identified. A cleft side (CSA) and a noncleft side angle (NCSA) were delineated and measured by each expert. The data was pooled, and the angles were analyzed for symmetry. Cupid's bow asymmetry was defined as a difference between NCSA and CSA ≥3°. Of the 37 patients studied, 29 were found to have asymmetry of Cupid's bow with an average angle difference of 8.0° (95% CI: 6.6°-9.5°). Within this group,15 patients were found with acute asymmetry and 14 with obtuse asymmetry. Geometric analysis was performed on an example of a patient with acute asymmetry to demonstrate how correction of asymmetry can be considered during surgical repair. There is an asymmetry that exists in the Cupid's bow of a significant number of patients with unoperated UCL. This finding not only adds to our understanding of UCL but may also have important implications when selecting the method/technique of surgical repair.

A method of three-dimensional muon imaging using cosmic ray ground array

Cosmic ray muon imaging technology is an effective non-destructive imaging technique. It is currently used to survey the internal structure of large-scale objects such as active volcanoes, pyramids, and some buildings. Additionally, it is used to detect high-Z materials in scenarios such as border security, nuclear reactor monitoring, and container inspection. All applications of cosmic ray muons require a detector to reveal and measure the flux or angular variations of muons. However, detectors may have specific characteristics for each application depending on the detection requirements. Unlike single-point track detectors, we propose using ground array detectors to investigate how ground array detection technology can be used for 3D reconstruction of objects. We use ground array detection technology for simulation studies and apply the Iterative Correction Algorithm (ICA) to reconstruct two-dimensional projections and obtain three-dimensional images of density distribution. We have also addressed the convergence problem and analyzed and optimized some parameters that may affect the detection results. The advantages of using ground arrays include their ability to simultaneously measure the transmittance flux data of muons in different directions, achieve multi-angle detection, and have a large field of view, enabling the collection of sufficient data for more accurate detection results. To verify the feasibility of our new method, we conducted a simple experimental validation on a cylindrical cement building located in the Large High Altitude Air Shower Observatory (LHAASO). By comparing the experimental results with the cement building in the array, we found that their shape structure and density information are basically consistent, demonstrating the effectiveness of our method.

Complete characterization of ocean color radiometers

Verifying and validating waterleaving radiance measurements from space for an accurate derivation of Ocean/Water Colour biogeophysical products is based on concurrent high-quality fiducial reference measurements (FRM) carried out on the ground or water body. The FRM principles established by the Committee on Earth Observation Satellites (CEOS) recommend that in situ Ocean Colour radiometers (OCR) have a documented history of SI traceable calibrations including uncertainty budgets. Furthermore, there can be significant differences between calibration and use of the instruments in the field due to differences in operating temperature, angular variation of the light field (especially for irradiance sensors), the intensity of the measured radiation, and spectral variation of the target, among others. Each of these factors may interact with individual properties of the instrument when deployed in the field, and estimation of such uncertainties requires instrument characterization in addition to the absolute radiometric calibration if expanded uncertainties within ±10% (k = 2) are the aim. The FRM4SOC Phase 2 project - funded by the European Commission in the frame of the Copernicus Programme and implemented by EUMETSAT - contributes to these efforts, aiming at developing an operational and sustained network of radiometric measurements of FRM quality. Within FRM4SOC-2, scientists from the Tartu Observatory (TO) of the University of Tartu performed an unprecedented batch of calibrations and characterizations on a set of 37 hyperspectral field radiometers representative of the most used OCR classes within the OC community. The calibrations and characterizations performed include the determination of radiometric responsivity, long-term stability, the accuracy of the spectral scale, non-linearity and accuracy of integration times, spectral stray light, angular response of irradiance sensors in air, dark signal, thermal sensitivity, polarization sensitivity, and signal-to-noise ratio of individual OCRs. Consistent correction of biases and extended uncertainty analysis procedures of in situ data obtained from different instruments and measurement models need to be clearly defined, which is the objective of this paper.

Design and simulation of light field patterns for angular color variation reduction in micro-LED and mini-LED RGB arrays.

We propose a methodology to mitigate angular color variation in full-color micron-scale LED arrays. By simulating light field distribution for red (AlGaAs) and green/blue (GaN) light across various RGB micro-LED sizes, we can select matching light field patterns for RGB chips, reducing angular color variation from 0.0201 to 0.0030. Applying this method to full-color mini-LED assemblies achieves a reduction from 0.0128 to 0.0032 by matching light field patterns with varying substrate thicknesses. This straightforward approach aligns with current mass transfer processes, offering practical implementation.

Effect of angular variation and in vitro degradation on mechanical properties of PBAT 3D scaffolds

AbstractThe customization of polymeric prototypes is available to meet the specific needs of individual patients, considering tissue location and patient‐specific characteristics. Poly (butylene adipate‐co‐terephthalate) (PBAT) has shown great promise among various polymers in this scenario due to its biodegradability and processability properties. However, the effect of geometry changes on the mechanical properties of PBAT 3D scaffolds and their mechanical stability after in vitro degradation are crucial to determining the final application. This study focuses on the structural, morphological, and mechanical characterization of PBAT prototypes with different architectures and evaluating their mechanical properties before and after in vitro degradation. Three‐dimensional structures were 3D printed with rectilinear deposition angles of 15°, 30°, 45°, 60°, 75°, and 90°. Mechanical tests revealed that the prototype architecture influenced the stiffness, elongation, and maximum tension, where a greater resistance was observed for filaments containing the lowest angles. The thermal stability of PBAT remained unaffected either by reprocessing or hydrolytic degradation; however, in vitro degradation affected the mechanical behavior by increasing the stiffness and decreasing the elongation of the scaffold. Biological assays have demonstrated the nontoxic nature of PBAT and its potential to promote cell viability at a rate of 95%. These findings underscore the possibility of optimizing the PBAT design and structure to tune the mechanical properties and contribute to advancing tissue engineering strategies.

Diffusion tractography of kidney by high angular resolution diffusion imaging

Diffusion magnetic resonance imaging (MRI) has been utilized to probe the renal microstructures but investigating the three-dimensional (3D) tubular network still presents significant challenges due to the complicated architecture of kidney. This study aims to assess whether high angular resolution diffusion imaging (HARDI) could improve the reconstruction of 3D tubular architectures. Kidneys from both mice and rats were imaged using 3D diffusion-weighted pulse sequences at 9.4 T. Five healthy mouse kidneys were scanned at an isotropic spatial resolution of 40 μm, with a b value of 1500 s/mm2 across 46 diffusion encoding directions. The study employed diffusion tensor imaging (DTI) and generalized Q-sampling imaging (GQI) to examine the tubular orientation distributions and tractography, validated by conventional histology. Fractional anisotropy (FA) and mean diffusivity (MD) were quantified and compared among the inner medullar (IM), outer medullar (OM), and cortex (CO) at different angular resolutions. FA values, estimated with 6 diffusion-weighted images (DWIs), were significantly overestimated by 49.9% (p < 0.001) in IM, 179.4% (p < 0.001) in OM, and 225.5% (p < 0.001) in CO, compared to using 46 DWIs. In contrast, MD exhibited less variations to angular resolution variations (3.4% in IM, 4.2% in OM, and 4.6% in CO). Both DTI and GQI at high angular resolution successfully traced renal tubular structures throughout the kidney, with GQI demonstrating superior performance in generating more continuous tracts. Furthermore, disrupted renal tubule structures were observed in a chronic kidney disease (CKD) rat model. HARDI, especially when combined with the GQI approach, holds promise in tracking complicated 3D tubule architectures and may serve as a potent tool for kidney disease research.

Inversion of Forest above Ground Biomass in Mountainous Region Based on PolSAR Data after Terrain Correction: A Case Study from Saihanba, China

Accurate retrieval of forest above ground biomass (AGB) based on full-polarization synthetic aperture radar (PolSAR) data is still challenging for complex surface regions with fluctuating terrain. In this study, the three-step process of radiometric terrain correction (RTC), which includes polarization orientation angle correction (POAC), effective scattering area correction (ESAC), and angular variation effect correction (AVEC), is adopted as the technical framework. In the ESAC stage, a normalized correction factor is introduced based on local incidence angle and radar incidence angle to achieve accurate correction of PolSAR data information and improve the inversion accuracy of forest AGB. In order to verify the validity and robustness of this research method, the full-polarization SAR data of ALOS-2 and the ground measured AGB data collected in the Saihanba research area in 2020 were used for experiments. Our findings revealed that in the ESAC phase, the introduction of the normalized correction factor can effectively eliminate the ESA phenomenon and improve the correlation coefficients of the backscatter coefficient and AGB. Taking the data of 25 July 2020 as an example, ESAC increases the correlation coefficients between AGB and the backscattering coefficients of HH, HV, and VV polarization channels by 0.343, 0.296, and 0.382, respectively. In addition, the RTC process has strong robustness in different AGB statistical models and different date PolSAR data.

Molecular basis for curvature formation in SepF polymerization

The self-assembly of proteins into curved structures plays an important role in many cellular processes. One good example of this phenomenon is observed in the septum-forming protein (SepF), which forms polymerized structures with uniform curvatures. SepF is essential for regulating the thickness of the septum during bacteria cell division. In Bacillus subtilis, SepF polymerization involves two distinct interfaces, the β-β and α-α interfaces, which define the assembly unit and contact interfaces, respectively. However, the mechanism of curvature formation in this step is not yet fully understood. In this study, we employed solid-state NMR (SSNMR) to compare the structures of cyclic wild-type SepF assemblies with linear assemblies resulting from a mutation of G137 on the β-β interface. Our results demonstrate that while the sequence differences arise from the internal assembly unit, the dramatic changes in the shape of the assemblies depend on the α-α interface between the units. We further provide atomic-level insights into how the angular variation of the α2 helix on the α-α interface affects the curvature of the assemblies, using a combination of SSNMR, cryo-electron microscopy, and simulation methods. Our findings shed light on the shape control of protein assemblies and emphasize the importance of interhelical contacts in retaining curvature.

Prediction of turbine gas Meter error in high-pressure by CFD techniques: A novel approach to reduce high-pressure calibration (HPC) costs

Calibrating gas meters to their operating conditions are ideal for defining accuracy, but obstacles like economics, time, physical limitations, and a lack of high-pressure calibration facilities often prevent this. A Computational Fluid Dynamics (CFD) model was created using the motion equations simultaneously angular momentum balance in steady state and the standard k-ε turbulence model to improve the prediction of Turbine Gas Meter (TGM) performance at both high-pressure and atmospheric conditions. Utilizing the Multiple Reference Frame (MRF) model, numerical simulations for a 2-inch turbine gas meter (DN 50, G65, and PN/ANSI 150) were conducted, and the proposed model's accuracy was validated by comparing atmospheric calibration simulation results with experimental data, demonstrating a Weighted Mean Error (WME) of −0.162%. According to the performance analysis results, the accuracy of the turbine gas meter deteriorated as pressure increased, and the rotor's maximum rise in angular velocity increased by 12% compared to atmospheric pressure. Additionally, it was discovered that pressure variations had a more significant impact on angular velocity at lower flow rates. Also, it was found that pressure has a considerable effect on gas turbine meter performance up to 50 bar (Re = 2.5 × 106). Angular velocity variations are negligible at more tremendous pressures and can be disregarded. Finally, a correlation for turbine gas meter was developed, which can be used to forecast angular velocity at various pressures and the error percentage compared to atmospheric conditions.

The single-cycle biphotons generated by noncollinear SPDC in the chirped QPM crystals

We analysis the noncollinear Spontaneous Parametric Down Conversion (SPDC) and compare the biphotons generated by the chirped Quasi-Phase-Matching (QPM) between the Periodically Poled Lithium Niobate (PPLN) and Periodically Poled KTiOPO4 (PPKTP) crystals. Due to the chirping of the crystals, the frequency response range of the biphotons would be greatly increased. For nonlinear SPDC, angular variation is limited (less than 0.06° in this paper), and the angle would narrow the frequency response range of the biphotons. We compare the effect of angle in PPLN crystals and PPKTP crystals for biphotons. Both the two crystals with chirped QPM, the single-cycle biphotons can be generated during noncollinear SPDC within a suitable angle range, which is favorable for wider applications in experiments.

The impact of the grinding angle of the soil dredging tool on its performance

This investigation explores the optimization of the backhoe blade's entry angle, addressing its crucial role in enhancing energy efficiency and operational effectiveness in subsoil manipulation - a fundamental aspect of agricultural tillage technologies. Utilizing an integrated approach that combines detailed field experiments with robust theoretical simulations, the study methodically quantifies the effects of angular variations on energy demands and mechanical performance during soil dredging. Our results reveal precise angular configurations that offer optimal reductions in energy use while significantly improving the disruption and aeration of the subsoil layer. This optimization contributes directly to the development of advanced, precision-engineered agricultural implements aimed at boosting sustainability and productivity in farming practices. Furthermore, the outcomes of this research provide pivotal insights into soil health management strategies, potentially influencing crop yield through improved root penetration and water absorption. These findings are expected to serve as a benchmark for future innovations in agricultural machinery design, aligning with global trends towards more sustainable agricultural practices and enhanced food security. This study sets a new standard for agricultural tool engineering, paving the way for transformative changes in the sector.

A coordinated modelling and control of modified pumped storage governor with unified power flow controller to damp low frequency oscillations in power system for stochastic renewable penetrations

A modern power system network is more susceptible to oscillatory instability problem due to power oscillations caused by uncertain penetration of renewable sources. Also, pumped storage hydro power generation (PSHPG) is going to take important role for energy storage and management with varying renewable penetrations, but their governors need to be utilized efficiently for power oscillation damping. In this work a coordinated modified pumped storage governor with fractional parallel unified power flow controller (FPUPFC) has been modelled and controlled to damp angular frequency variations in power system. The prime objective of this work is to enhance efficacy of pumped storage hydro turbine governors integrated into an expert system with UPFC to take part in electromechanical oscillation damping. Here the governor is modified by fractional order PID action with additional phase compensation and in FPUPFC both series and shunt converters are controlled simultaneously by parallel fractional lead-lag based control action. The power system considered here consists of hydro generators of 100 MVA with 90.94 MW rated turbine output power with different operating conditions for two area 4 generators and 39 bus 10 generators multimachine renewable integrated system. It has been observed that efficacy of pumped storage hydro turbine governor action has been much improved when coordinated with FPUFC control action. A new hybridized modified differential evolution with fractional particle swarm optimization (MDEFPSO) is proposed to tune the parameters of proposed controller, with a multi-objective function considering variation in speed and real power deviations, settling time, overshoot and undershoot of system response.

Accurate and Efficient Sitting Posture Recognition and Human‐Machine Interaction Device Based on Fabric Pressure Sensor Array and Neural Network

AbstractThis article presents a novel approach to interact with users through posture recognition, leveraging its advantages of convenience and real‐time feedback to enhance user engagement and personalized experiences. In contrast to traditional methods that rely on camera‐based posture detection, this study proposes a deep learning‐based framework for posture recognition by classifying the distribution of body pressure under different sitting positions. The system integrates a large‐area, highly flexible fabric pressure sensor array into the chair, which collects data on posture‐specific pressure patterns for training and identification purposes. A deep learning algorithm, specifically the LeNet architecture, is employed to classify 49 different sitting positions based on angular variations, including body tilt to the left or right, standard posture, and forward or backward leaning. The proposed approach achieves an impressive accuracy rate of 99.86%. Furthermore, the application of this posture recognition system in VR devices enables intelligent chair control for VR games. This research provides strong support for future advancements in chair design and human‐computer interaction technologies, enhancing ergonomic designs in various domains such as automotive seats, office chairs, and medical seating, while simultaneously improving user comfort and well‐being.

Generalized polarization and time-resolved fluorescence provide evidence for different populations of Laurdan in lipid vesicles

The solvatochromic dye Laurdan is widely used in sensing the lipid packing of both model and biological membranes. The fluorescence emission maximum shifts from about 440 nm (blue channel) in condensed membranes (So) to about 490 nm (green channel) in the liquid-crystalline phase (Lα). Although the fluorescence intensity based generalized polarization (GP) is widely used to characterize lipid membranes, the fluorescence lifetime of Laurdan, in the blue and the green channel, is less used for that purpose. Here we explore the correlation between GP and fluorescence lifetimes by spectroscopic measurements on the So and Lα phases of large unilamellar vesicles of DMPC and DPPC. A positive correlation between GP and the lifetimes is observed in each of the optical channels for the two lipid phases. Microfluorimetric determinations on giant unilamellar vesicles of DPPC and DOPC at room temperature are performed under linearly polarized two-photon excitation to disentangle possible subpopulations of Laurdan at a scale below the optical resolution. Fluorescence intensities, GP and fluorescence lifetimes depend on the angle between the orientation of the linear polarization of the excitation light and the local normal to the membrane of the optical cross-section. This angular variation depends on the lipid phase and the emission channel. GP and fluorescence intensities in the blue and green channel in So and in the blue channel in Lα exhibit a minimum near 90o. Surprisingly, the intensity in the green channel in Lα reaches a maximum near 90o. The fluorescence lifetimes in the two optical channels also reach a pronounced minimum near 90o in So and Lα, apart from the lifetime in the blue channel in Lα where the lifetime is short with minimal angular variation. To our knowledge, these experimental observations are the first to demonstrate the existence of a bent conformation of Laurdan in lipid membranes, as previously suggested by molecular dynamics calculations.

EPR of LiNaGe4O9:Mn crystal

EPR spectra of manganese ions were studied in lithium-sodium tetragermanate LiNaGe4O9 crystal. The observed spectrum was typical for doping ions in tetravalent Mn4+ state (3d 3, S=3/2) and for main orientations of static magnetic field along the crystal axes (T=296 K) consisted of hyperfine sextuplet from electronic transition Ms= +1/2 ↔ – 1/2. Transitions Ms= ±3/2 ↔±1/2 were not detected owing to strong interaction of the spin system with crystal field as compared with electron Zeeman interaction in the X frequency range of EPR registration. The angular variations of the spectrum were measured for static field B rotated in three main crystal planes. Since only central transition (Ms= +1/2 ↔ – 1/2) was detected and the splitting of the fine structure remained unknown, the spectrum was described in the approximation of effective spin Seff=1/2. The parameters of the spin Hamiltonian, including electron Zeeman and hyperfine interactions, were calculated. The magnetic multiplicity of the spectrum (km=2) evidenced that paramagnetic centers occupied the sites with monoclinic C2 point symmetry. Taking into consideration the positional symmetry as well ionic charges and radii of the guest ion and the hosts, it was concluded that paramagnetic Mn4+ centers substituted for Ge4+ within oxygen octahedral complexes in the crystal lattice of LiNaGe4O9.

A pore-level 3D lattice Boltzmann simulation of mass transport and reaction in catalytic particles used for methane synthesis

Three-dimensional lattice Boltzmann (LB) simulations were carried out to investigate the mass transport and reaction inside and around catalytic porous particles used in fluidized beds for the synthesis of methane from biogas (H2/CO mixtures). The 3D internal porous structure of a real particle with a size ∼200 μm was assessed with Synchrotron-based X-ray tomography (XTM). Pore-resolved simulations with a suitable LB model for catalytic reactions in microflows revealed that the preferential diffusion of H2 and the resulting inability of CO to penetrate deep inside the pores led to segregated distributions of the two species, hindering reaction in the downstream parts of the particle and rendering CO the deficient reactant. The implications for practical fluidized beds are that, for specific bed zones with a high dense-phase (solid-phase) volume fraction and a predominant flow direction, CO starvation may occur and may thus limit the methane yields. Subsequent parametric studies of spherical particles with a diameter 2R=150 μm and an artificially generated porosity allowed comparisons of LB results with radially symmetric analytical continuum-model solutions. The LB simulations revealed appreciable angular variations in the CO concentration at the external surface (r=R) and the outer layers of particle, especially at the higher investigated Damköhler numbers, which were however diminished as the core of the particle (r→0) was approached. The large angular variations, in conjunction with the skewed CO distributions towards their lower values, led to LB-computed particle effectiveness factors ∼30% lower than the corresponding analytical solutions.

An Optimized Control Strategy for Image-Based Visual Servoing Using Polar Coordinates

Image-based visual servoing is a crucial technique in robotic systems that enables accurate manipulation and control through visual feedback. In scenarios involving substantial rotational motion or changes in orientation, traditional Cartesian-based visual servoing methods may encounter limitations in terms of control performance. To address this challenge, we propose a novel approach that use coordinates for visual servoing control. By reparametrizing the control inputs in terms of polar radius and polar angle, our method offers a more intuitive and efficient way to handle rotations and angular variations. In addition, we further study the polar-based IBVS control by conducting experiments using a Proportional (P) controller as well as the Levenberg-Marquardt (LM) algorithm respectively, and the experimental results indicate that the proposed method demonstrates a faster convergence speed and better robustness.

Pengaruh Besar Sudut pada Servis Bulu Tangkis dengan Gerak Parabola

Badminton athletes apply various techniques and strategies when competing. One technique is to apply the correct serve to bounce the shuttlecock. The aim of this research is to determine the effect of how big the angle of the racket can be over the net and on target. This research applies an experimental method, which was chosen with the main aim of this research being to test an object. In this context, the focus is on angle variations to determine the optimal angle for the badminton player when serving so that the shuttlecock can fall over the net with different elasticity. In this experiment, the parabolic motion recordings were analyzed using the Tracker application to obtain the initial speed for each angular variation. The shuttlecock's initial speed can be used to calculate the shuttlecock's highest point, the time it reaches its maximum height, and the shuttlecock's furthest distance. The results showed that differences in the initial angle of the backhand serve caused differences in the maximum height, distance and time achieved.

Movement examination of the lumbar spine using a developed wearable motion sensor.

A system for monitoring spinal movements based on wearable motion sensors is proposed here. For this purpose, a hardware system is first developed that measures data of linear acceleration, angular velocity, and the magnetic field of the spine. Then, the obtained data from these sensors are combined in a proposed complementary filter, and their angular variations are estimated. The obtained results of angular variation of this system in comparison with an accurate reference illustrate that the root mean squared error is less than 1.61 degrees for three angles of , and for this system that proves this system can accurately estimate the angular variation of the spine. Then, the system is mounted on the lumbar spine of several volunteers, and the obtained angles from the patients' spine are compared with some healthy volunteers' spine, and the performance of their spine improves over time. The results show that this system can be very effective for patients who suffer from back problems and help in their recovery process a lot.

Waist Remodeling without Incision, with Ultrasound-guided Monocortical Fracture.

Rib remodeling is a surgical technique for waist shaping in women and men. However, one of the main patient complaints is the scar. We aimed to describe a scarless, ultrasound-guided rib remodeling (RibXcar) technique that assessed the degree of angular variation of the fracture by ultrasound and the variation in waist measurement and patient satisfaction through a survey. The RibXcar technique was performed in 30 women aged 18-35 years in Peru, Colombia, and Mexico between October and December 2022 by three board-certified plastic surgeons trained in ultrasound and in this technique. The plastic surgeons measured costal angles before and immediately, 1 month, and 3 months after the surgery by ultrasound, as well as the waist in the same site and at these time points. Similarly, patient satisfaction was surveyed 3 months after the surgery, in which questions were asked about body aesthetics and the puncture site. Ultrasound angular measurements before and immediately, 1 month, and 3 months after the surgical procedure were 168.00, 158.00, 160.00, and 160.43 degrees in the 10th rib, 170.50, 160.50, 152.50, and 163.50 degrees in the 11th rib, and 172.00, 162.00, 154.00, and 165.00 degrees in the 12th rib, respectively. The satisfaction survey showed that patients were satisfied with the aesthetic results of both the shape of the waist and the puncture site. RibXcar surgery maintains the angular variation over time. Similarly, waist measurements show a sustained reduction. Three months postoperatively, the patients were satisfied with the aesthetic results of the waist and the puncture site.