Amphiphilic Block Copolymer Poly Research Articles

Sequential intracellular release of water-soluble cargos from Shell-crosslinked polymersomes

Polymer vesicles, i.e. polymersomes (PS), present unique nanostructures with an interior aqueous core that can encapsulate multiple independent cargos concurrently. However, the sequential release of such co-loaded actives remains a challenge. Here, we report the rational design and synthesis of oxidation-responsive shell-crosslinked PS with capability for the controlled, sequential release of encapsulated hydrophilic molecules and hydrogels. Amphiphilic brush block copolymers poly(oligo(ethylene glycol) methyl ether methacrylate)-b-poly(oligo(propylene sulfide) methacrylate) (POEGMA-POPSMA) were prepared to fabricate PS via self-assembly in aqueous solution. As a type of unique drug delivery vehicle, the interior of the PS was co-loaded with hydrophilic molecules and water-soluble poly(N-isopropylacrylamide) (PNIPAM) conjugates. Due to the thermosensitivity of PNIPAM, PNIPAM conjugates within the PS aqueous interior underwent a phase transition to form hydrogels in situ when the temperature was raised above the lower critical solution temperature (LCST) of PNIPAM. Via control of the overall shell permeability by oxidation, we realized the sequential release of two water-soluble payloads based on the assumption that hydrogels have much smaller membrane permeability than that of molecular cargos. The ability to control the timing of release of molecular dyes and PNIPAM-based hydrogels was also observed within live cells. Furthermore, leakage of hydrogels from the PS was effectively alleviated in comparison to molecular cargos, which would facilitate intracellular accumulation and prolonged retention of hydrogels within the cell cytoplasm. Thus, we demonstrate that the integration of responsive hydrogels into PS with crosslinkable membranes provides a facile and versatile technique to control the stability and release of water-soluble cargos for drug delivery purposes.

Drug Combination Synergy in Worm-like Polymeric Micelles Improves Treatment Outcome for Small Cell and Non-Small Cell Lung Cancer.

Nanoparticle-based systems for concurrent delivery of multiple drugs can improve outcomes of cancer treatments, but face challenges because of differential solubility and fairly low threshold for incorporation of many drugs. Here we demonstrate that this approach can be used to greatly improve the treatment outcomes of etoposide (ETO) and platinum drug combination ("EP/PE") therapy that is the backbone for treatment of prevalent and deadly small cell lung cancer (SCLC). A polymeric micelle system based on amphiphilic block copolymer poly(2-oxazoline)s (POx) poly(2-methyl-2-oxazoline- block-2-butyl-2-oxazoline- block-2-methyl-2-oxazoline) (P(MeOx- b-BuOx- b-MeOx) is used along with an alkylated cisplatin prodrug to enable co-formulation of EP/PE in a single high-capacity vehicle. A broad range of drug mixing ratios and exceptionally high two-drug loading of over 50% wt. drug in dispersed phase is demonstrated. The highly loaded POx micelles have worm-like morphology, unprecedented for drug loaded polymeric micelles reported so far, which usually form spheres upon drug loading. The drugs co-loading in the micelles result in a slowed-down release, improved pharmacokinetics, and increased tumor distribution of both drugs. A superior antitumor activity of co-loaded EP/PE drug micelles compared to single drug micelles or their combination as well as free drug combination was demonstrated using several animal models of SCLC and non-small cell lung cancer.

Zinc phthalocyanine encapsulated in polymer micelles as a potent photosensitizer for the photodynamic therapy of osteosarcoma

Zinc phthalocyanine (ZnPc) is a highly potent second-generation photosensitizer for cancer photodynamic therapy (PDT) with attractive photo-physical and photo-chemical properties. However, poor solubility and strong trend of crystallization prevent it from loading in most of drug delivery systems and hamper its further application. Herein, to overcome this problem, an amphiphilic block copolymer poly(ethylene glycol)-poly[2-(methylacryloyl)ethylnicotinate] (PEG-PMAN) with aromatic nicotinate is used to load ZnPc for their π–π interactions. The formed PEG-PMAN/ZnPc nanoparticle (PPZ) dramatically increases reactive oxygen species production in osteosarcoma cells after light irradiation, causes mitochondrial injury and promotes cell cycle arrest at G2/M, leading to a 100-fold cytotoxicity improvement comparing with free ZnPc. The excellent therapeutic effectiveness and safety of PPZ are also proved by in vivo experiments operating on osteosarcoma model. The finding above indicates that PPZ has promising clinical applications as a next-generation photosensitizer in PDT of osteosarcoma.

Effect of chain architecture on the swelling and thermal response of star-shaped thermo-responsive (poly(methoxy diethylene glycol acrylate)-block-polystyrene)3 block copolymer films.

The effect of chain architecture on the swelling and thermal response of thin films obtained from an amphiphilic three-arm star-shaped thermo-responsive block copolymer poly(methoxy diethylene glycol acrylate)-block-polystyrene ((PMDEGA-b-PS)3) is investigated by in situ neutron reflectivity (NR) measurements. The PMDEGA and PS blocks are micro-phase separated with randomly distributed PS nanodomains. The (PMDEGA-b-PS)3 films show a transition temperature (TT) at 33 °C in white light interferometry. The swelling capability of the (PMDEGA-b-PS)3 films in a D2O vapor atmosphere is better than that of films from linear PS-b-PMDEGA-b-PS triblock copolymers, which can be attributed to the hydrophilic end groups and limited size of the PS blocks in (PMDEGA-b-PS)3. However, the swelling kinetics of the as-prepared (PMDEGA-b-PS)3 films and the response of the swollen film to a temperature change above the TT are significantly slower than that in the PS-b-PMDEGA-b-PS films, which may be related to the conformation restriction by the star-shape. Unlike in the PS-b-PMDEGA-b-PS films, the amount of residual D2O in the collapsed (PMDEGA-b-PS)3 films depends on the final temperature. It decreases from (9.7 ± 0.3)% to (7.0 ± 0.3)% or (6.0 ± 0.3)% when the final temperatures are set to 35 °C, 45 °C and 50 °C, respectively. This temperature-dependent reduction of embedded D2O originates from the hindrance of chain conformation from the star-shaped chain architecture.

Delivery of paclitaxel using nanoparticles composed of poly(ethylene oxide)-b-poly(butylene oxide) (PEO-PBO)

An amphiphilic block copolymer poly(ethylene oxide)-b-poly(butylene oxide) (PEO-PBO) was evaluated as a carrier for therapeutic delivery of paclitaxel (PTX). PEO-PBO and PTX form nanoparticles (NPs) by self-assembly upon hydration. The size of these NPs was about 92.71nm and the zeta potential was −5.06mV, which met the requirements for passive tumor targeting through the enhanced permeability and retention effect. Compared with a commonly used block copolymer poly(ethylene glycol)-b-poly-D,L-(lactic acid) (PEG-PDLLA), PEO-PBO forms nanoparticles with superior pharmacokinetic, biodistribution, and tumor inhibitory properties. Meanwhile, results of hemolysis study and CMC determination showed that PEO-PBO had better biocompatibility and stability than PEG-PDLLA. These data suggest that PEO-PBO has potential for application in drug delivery and warrant further evaluation.

Linear, Y-shaped, and H-shaped amphiphilic azobenzene copolymers: Facile synthesis and topological effect on self-assembly and photoresponsive property

Novel linear (AB-type), Y-shaped (AB2-type), and H-shaped (B2AB2-type) amphiphilic block copolymers of poly(ethylene glycol) (PEG) with polymer containing azobenzene chromophores (PAzo) were successfully synthesized by the head-to-tail acyclic diene metathesis (ADMET) polymerization. Three types of acrylate functional ADMET chain stoppers were first prepared through the Michael addition reaction and esterification. Then, a series of amphiphilic copolymers were obtained via through ADMET polymerization of azobenzene-functionalized asymmetric α,ω-diene monomer using the as-prepared PEGs with acrylate end groups as macromolecular chain stoppers. Finally, the amphiphilic copolymers could spontaneously self-assemble into spherical nanoparticles in an aqueous medium. In view of the photoresponsive blocks of PAzo, the solution photochemical properties of the solution and the sizes of these spherical aggregates can be manipulated by changing the parameters such as UV and visible lights. The differences in structure of the copolymers induced profound effects on photoresponsive performance.

Highly reactive and stable nanoscale zero-valent iron prepared within vesicles and its high-performance removal of water pollutants

Nanoscale zero-valent iron particles have large specific surface area and high reaction activity, and have been increasingly used for the degradation of environmental contaminants. However, rapid aggregation and deactivation hinder their wide applications. In this work, nanoscale zero-valent iron (NZVI) particles were prepared in vesicles, which were formed by self-assembly of amphiphilic block copolymer poly(1-vinylpyrrolidone-co-vinylacetate) (PVV) in aqueous tetrahydrofuran medium, and characterized with the aid of XRD, FTIR, SEM-EDX, TEM, XPS and DLS techniques. It was found that the NZVI particles were well encapsulated in the vesicles, and they could be stored directly in the air as solids, but the dried NZVI particles could be easily released from the vesicles once they were put in water. These NZVI particles showed some unique features, such as uniform nanometer size distribution (from 70 to 100nm), vesicle-like morphology, and good dispersion. Activity and stability of the NZVI in vesicles were examined by using Cr(VI) and nitrobenzene as the model pollutants, and compared with the bare NZVI particles synthesized with the same procedures but without PVV. A dramatic difference in activity and stability was observed for the two different NZVI particles. The NZVI in vesicles showed a good chemical stability in the air, and still maintained its high reactivity in water. Such excellent performance might be attributed to the encapsulation of the NZVI by vesicles, which could impede well the strong agglomeration of metal particles in water and prevent metal particles from being oxidized in the air.

RAFT synthesis of an amphiphilic block copolymer bearing chlorin rings in the hydrophobic segment and its application in photodynamic therapy

ABSTRACTRAFT polymerization of styrene (St) in the presence of 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (TFPP) was conducted using 4‐cyano‐4‐(thiobenzoyl)thiopentanoic acid as a chain‐transfer agent and azobisisobutyronitrile as an initiator at 60 °C. The resulting polymer exhibited a chlorin‐like UV‐vis spectrum, which indicated that the polymer possessed a reduced TFPP structure. Furthermore, an SEC trace recorded using UV‐vis detector (λ = 410 nm), which selectively detected the TFPP‐incorporated polymer, shifted toward higher molecular mass as the polymerization progressed. This evidence indicated that TFPP acted as a vinylene‐type monomer, such as maleimide, to form a copolymer, namely, poly(St‐co‐TFPP). The mole fraction of TFPP units was estimated to be 0.74 × 10−3, which was close to that in the feed (1 × 10−3). Chain extension of poly(St‐co‐TFPP) with polyethylene glycol monomethyl ether acrylate (PEGA) was performed to afford the amphiphilic block copolymer poly(St‐co‐TFPP)‐b‐poly(PEGA). The degrees of polymerization of St and PEGA were determined to be 64 and 75, respectively. Poly(St‐co‐TFPP)‐b‐poly(PEGA) formed micelles following dialysis. The median diameter of the micelles in solution was determined to be 16 nm by DLS. The photocytotoxicity of the micelle solution was evaluated in a human glioblastoma cell line (U251) and an N‐methyl‐N'‐nitro‐N‐nitrosoguanidine‐induced mutant of a rat murine RGM‐1 gastric carcinoma mucosal cell line (RGK‐1). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 3395–3403

Thermoresponsive and acid-cleavable amphiphilic copolymer micelles for controlled drug delivery

ABSTRACTThermoresponsive and acid-cleavable amphiphilic block copolymers poly(N-isopropylacrylamide)-acetal-poly(4-substituted-ε-caprolactones) (PNiPAAm-a-PXCLs) containing an acidic-cleavable acetal linkage at the junction between the temperature-sensitive hydrophilic PNiPAAm and the degradable hydrophobic block PXCL were synthesized through ring-opening polymerization and electrophilic addition reactions. These polymer solutions showed reversible changes in optical properties and a lower critical solution temperature in the range of 32.0–46.4°C. The copolymers formed micelles in aqueous solution with critical micelle concentrations in the range of 0.83–15.95 mg L−1 had hydrodynamic sizes of <200 nm and were spherical. Under the combined stimulation of temperature and pH, the micellar nanoparticles could be dissociated; the loaded molecules could be released from the assemblies more efficiently than that under only one stimulus or without stimulus. In addition, the nanoparticles exhibited low toxicity against human cervical cancer (HeLa) cells at concentrations ≤1000 µg mL−1. Doxorubicin-loaded PNiPAAm11-a-PCL28 micelles also effectively inhibited the proliferation of HeLa cells with a half-maximal inhibitory concentration (IC50) of 1.60 µg mL−1.

Catalytic oxidation of cellulose with a novel amphiphilic nitroxide block copolymer as a recoverable catalyst

A novel amphiphilic block copolymer of poly(ethylene glycol)-b-poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl-methacrylate) was prepared through activators regenerated by electron transfer atom transfer radical polymerization of 2,2,6,6-tetramethylpiperidine methacrylate monomer, followed by oxidizing it with 3-chloroperoxybenzoic acid. This nitroxide block copolymer was used as a recoverable catalyst instead of free 2,2,6,6-tetramethylpiperidine-1-oxyl for selective catalytic oxidation of cellulose. According to its amphiphilic property, a mixture of acetonitrile and water was used as the reaction medium. The resulting carboxyl content of oxidized cellulose reached 1.07 mmol/g, equivalent to 73.2% of free TEMPO, was satisfactory. Furthermore, the block copolymer was easy to recycle and the activity did not decrease to a noticeable level after 4 cycles.

Improved Photodynamic Therapy Efficacy of Protoporphyrin IX-Loaded Polymeric Micelles Using Erlotinib Pretreatment.

Photodynamic therapy (PDT) has attracted widespread attention in recent years as a noninvasive and highly selective approach for cancer treatment. We have previously reported a significant increase in the 90-day complete response rate when tumor-bearing mice are treated with the epidermal growth factor receptor (EGFR) inhibitor erlotinib prior to PDT with the photosensitizer benzoporphyrin-derivative monoacid ring A (BPD-MA) compared to treatment with PDT alone. To further explore this strategy for anticancer therapy and clinical practice, we tested whether pretreatment with erlotinib also exhibited a synergistic therapeutic effect with a nanocarrier containing the clinically relevant photosensitizer protoporphyrin IX (PpIX). The PpIX was encapsulated within biodegradable polymeric micelles formed from the amphiphilic block copolymer poly(ethylene glycol)-polycaprolactone (PEG-PCL). The obtained micelles were characterized systematically in vitro. Further, an in vitro cytotoxicity study showed that PDT with PpIX loaded micelles did exhibit a synergistic effect when combined with erlotinib pretreatment. Considering the distinct advantages of polymeric nanocarriers in vivo, this study offers a promising new approach for the improved treatment of localized tumors. The strategy developed here has the potential to be extended to other photosensitizers currently used in the clinic for photodynamic therapy.

Surface Engineering of Spherical Metal Nanoparticles with Polymers toward Selective Asymmetric Synthesis of Nanobowls and Janus-Type Dimers.

New synthetic methods capable of controlling structural and compositional complexities of asymmetric nanoparticles (NPs) are very challenging but highly desired. A simple and general synthetic approach to designing sophisticated asymmetric NPs by anisotropically patterning the surface of isotropic metallic NPs with amphiphilic block copolymers (BCPs) is reported. The selective galvanic replacement and seed-mediated growth of a second metal can be achieved on the exposed surface of metal NPs, resulting in the formation of nanobowls and Janus-type metal-metal dimers, respectively. Using Ag and Au NPs tethered with amphiphilic block copolymers of poly(ethylene oxide)-block-polystyrene (PEO-b-PS), anisotropic surface patterning of metallic NPs (e.g., Ag and Au) is shown to be driven by thermodynamical phase segregation of BCP ligands on isotropic metal NPs. Two proof-of-concept experiments are given on, i) synthesis of Au nanobowls by a selective galvanic replacement reaction on Janus-type patched Ag/polymer NPs; and ii) preparation of Au-Pd heterodimers and Au-Au homodimers by a seed-mediated growth on Janus-type patched Au/polymer NPs. The method shows remarkable versatility; and it can be easily handled in aqueous solution. This synthetic strategy stands out as the new methodology to design and synthesis asymmetric metal NPs with sophisticated topologies.

Neuroendocrine Tumor-Targeted Upconversion Nanoparticle-Based Micelles for Simultaneous NIR-Controlled Combination Chemotherapy and Photodynamic Therapy, and Fluorescence Imaging.

Although neuroendocrine tumors (NETs) are slow growing, they are frequently metastatic at the time of discovery and no longer amenable to curative surgery, emphasizing the need for the development of other treatments. In this study, multifunctional upconversion nanoparticle (UCNP)-based theranostic micelles are developed for NET-targeted and near-infrared (NIR)-controlled combination chemotherapy and photodynamic therapy (PDT), and bioimaging. The theranostic micelle is formed by individual UCNP functionalized with light-sensitive amphiphilic block copolymers poly(4,5-dimethoxy-2-nitrobenzyl methacrylate)-polyethylene glycol (PNBMA-PEG) and Rose Bengal (RB) photosensitizers. A hydrophobic anticancer drug, AB3, is loaded into the micelles. The NIR-activated UCNPs emit multiple luminescence bands, including UV, 540 nm, and 650 nm. The UV peaks overlap with the absorption peak of photocleavable hydrophobic PNBMA segments, triggering a rapid drug release due to the NIR-induced hydrophobic-to-hydrophilic transition of the micelle core and thus enabling NIR-controlled chemotherapy. RB molecules are activated via luminescence resonance energy transfer to generate 1O2 for NIR-induced PDT. Meanwhile, the 650 nm emission allows for efficient fluorescence imaging. KE108, a true pansomatostatin nonapeptide, as an NET-targeting ligand, drastically increases the tumoral uptake of the micelles. Intravenously injected AB3-loaded UCNP-based micelles conjugated with RB and KE108-enabling NET-targeted combination chemotherapy and PDT-induce the best antitumor efficacy.

An intraocular drug delivery system using targeted nanocarriers attenuates retinal ganglion cell degeneration

Glaucoma is a common blinding disease characterized by loss of retinal ganglion cells (RGCs). To date, there is no clinically available treatment directly targeting RGCs. We aim to develop an RGC-targeted intraocular drug delivery system using unimolecular micelle nanoparticles (unimNPs) to prevent RGC loss. The unimNPs were formed by single/individual multi-arm star amphiphilic block copolymer poly(amidoamine)–polyvalerolactone–poly(ethylene glycol) (PAMAM–PVL–PEG). While the hydrophobic PAMAM–PVL core can encapsulate hydrophobic drugs, the hydrophilic PEG shell provides excellent water dispersity. We conjugated unimNPs with the cholera toxin B domain (CTB) for RGC-targeting and with Cy5.5 for unimNP-tracing. To exploit RGC-protective sigma-1 receptor (S1R), we loaded unimNPs with an endogenous S1R agonist dehydroepiandrosterone (DHEA) as an FDA-approved model drug. These unimNPs produced a steady DHEA release in vitro for over two months at pH7.4. We then co-injected (mice, intraocular) unimNPs with the glutamate analog N-methyl-d-aspartate (NMDA), which is excito-toxic and induces RGC death. The CTB-conjugated unimNPs (i.e., targeted NPs) accumulated at the RGC layer and effectively preserved RGCs at least for 14days, whereas the unimNPs without CTB (i.e., non-targeted NPs) showed neither accumulation at nor protection of NMDA-treated RGCs. Consistent with S1R functions, targeted NPs relative to non-targeted NPs showed markedly better inhibitory effects on apoptosis and oxidative/inflammatory stresses in the RGC layer. Hence, the DHEA-loaded, CTB-conjugated unimNPs represent an RGC/S1R dual-targeted nanoplatform that generates an efficacious template for further development of a sustainable intraocular drug delivery system to protect RGCs, which may be applicable to treatments directed at glaucomatous pathology.

Reduction-responsive PEtOz-SS-PCL micelle with tailored size to overcome blood–brain barrier and enhance doxorubicin antiglioma effect

A series of novel reduction-responsive micelles with tailored size were designed and prepared to release doxorubicin (DOX) for treating glioma, which were developed based on amphiphilic block copolymer poly (2-ethyl-2-oxazoline)-b-poly (ε-caprolactone) (PEtOz-SS-PCL) and the micelle size could be regulated by designing the polymer structure. The DOX-loaded PEtOz-SS-PCL micelles had small size and rapid drug release in reductive intracellular environments. Biodistribution and in vivo imaging studies in C6 glioma mice tumor model showed that DOX loaded PEtOz-SS-PCL43 micelles with the smallest size had superior accumulation and fast drug release in tumor sites. In vivo antitumor activity demonstrated that DOX-loaded PEtOz-SS-PCL43 micelles improved antitumor efficacy in contrast to PEtOz-SS-PCL micelles with larger size toward the orthotopic C6-Luci cells-bearing mice. This study shows great potential in tailoring the micelle size and introducing the responsive bonds or compartment for intracellular drug delivery and release in glioma treatment by designing the architecture of the polymer.

Synthesis of cationic fluorinated polyacrylate copolymer by RAFT emulsifier-free emulsion polymerization and its application as waterborne textile finishing agent

Cationic fluorinated polyacrylate emulsifier-free emulsion was synthesized by ab initio RAFT emulsifier-free emulsion polymerization using fluorine-containing amphiphilic block copolymer poly (2-(dimethylamino) ethyl methacrylate)-b-poly (hexafluorobutyl acrylate) (PDMAEMA-b-PHFBA) macro-RAFT agent as a stabilizer, and (2-(acryloyloxy)ethyl)trimethylammonium chloride (DMC) as a cationic monomer. The critical micelle concentration (CMC) of PDMAEMA-b-PHFBA is much smaller than the CMC of SDS, suggesting the excellent micelle-forming ability of PDMAEMA-b-PHFBA in water. The influence of the amount of DMC on emulsion polymerization and finished fabric properties was investigated. The latex particle size and its distribution decreased as the amount of DMC increased from 0 wt% to 2.25 wt%, and then increased afterwards. The cationic fluorinated polyacrylate showed much higher thermal stability than polyacrylate. The water contact angle of the finished fabric decreased with the increase of the amount of DMC. The cationic fluorinated polyacrylate emulsifier-free emulsion was deposited on the surface of fabric characterized by SEM-EDX, and the finished fabrics showed good water repellency. In addition, the finished fabric with fluorinated polyacrylate emulsifier-free emulsion had good antibacterial property against E. coli and S. aureus.

Amphiphilic Imbalance and Stabilization of Block Copolymer Micelles on-Demand through Combinational Photo-Cleavage and Photo-Crosslinking.

An amphiphilic block copolymer of poly(ethylene oxide)-b-poly((N-methacryloxy phthalimide)-co-(7-(4-vinyl-benzyloxyl)-4-methylcoumarin)) (PEO45 -b-P(MAPI36 -co-VBC4 )) is designed to improve the micellar stability during the photo-triggered release of hydrophobic cargoes. Analysis of absorption and emission spectra, solution transmittance, dynamic light scattering, and transmission electron microscopy supports that polymer micelles of PEO45 -b-P(MAPI36 -co-VBC4 ) upon the combinational irradiation of 365 and 254 nm light can be solubilized through the photolysis of phthalimide esters and simultaneously crosslinked via the partially reversible photo-dimerization of coumarins. The photo-triggered release experiment shows that the leakage of doxorubicin molecules from crosslinked micelles can be predictably regulated by controlling the irradiation time of 365 and 254 nm light.

Novel Structural Changes during Temperature-Induced Self-Assembling and Gelation of PLGA-PEG-PLGA Triblock Copolymer in Aqueous Solutions.

The thermoresponsive amphiphilic block copolymer poly(d,l-lactic acid-co-glycolic acid)-block-poly(ethylene glycol)-block-poly(d,l-lactic acid-co-glycolic acid) (PLGA-PEGn -PLGA), which exhibits a reversible temperature-induced sol-gel transition at higher polymer concentrations in aqueous solution has attached a great deal of interest because of its potential in biomedical applications. In the present work, the length of the hydrophobic PLGA blocks is kept constant, whereas the length of the hydrophilic PEG block is altered and this variation has a pronounced impact on the phase behavior of the aqueous samples and the structure of the polymer. A short PEG block promotes gelation at a low temperature, whereas a longer PEG block shifts the gelation point to higher temperature. By using a combination of turbidity, rheology, and small angle neutron scattering (SANS) methods, the authors have revealed dramatic temperature effects. In dilute solution, the SANS experiments expose asymmetric ellipsoid structures for the copolymer with the short PEG-spacer, whereas spherical core-shell structure is observed for the polymer with long PEG-spacer. In the semidilute concentration regime, SANS measurements disclose similar profiles for the two copolymers. In a broad temperature interval, the transition from spherical core-shell micelles to cylindrical structure and packing of cylinders is observed.

Studies of relationship between polymer structure and hydration environment in amphiphilic polytartaramides

ABSTRACTThe relationships between the chemical structures and hydration environment of the polymers can provide significant insight into the water‐amphiphilic polymer interactions. Here, the hydrophobicity of amphiphilic block copolymers poly(ethylene tartaramide‐b‐alkyl isocyanate) is gradually tuned by using of a series of pendant alkyl (isopropyl, n‐butyl, cyclopentyl, and cyclohexyl) groups. Dynamics of hydration probed by low‐field NMR relaxometry exhibits a heterogeneous environment of water molecules, corresponding to tightly bound water with slow re‐orientational mobility and loosely bound water with fast re‐orientational mobility. Progressively larger amounts of bound water are present in the copolymers, ongoing from pendant isopropyl, n‐butyl, cyclopentyl, and finally to cyclohexyl group. Water in the copolymer bearing the cyclohexyl group has a significantly high partial specific heat capacity. Therefore, hydrophobic interaction between the polymer and water is enhanced when the hydrophobicity of the polymer is increased, resulting in considerable hydrophobic hydration with decreased mobility of the bound water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017, 55, 138–145

Study of the Fluorescence Based Applications of Pyrene-Tagged Poly(N-vinyl-2-pyrrolidone).

In this study we have explored the fluorescence based applications of luminescent pyrene-tagged PNVP (PyPNVP) reported in our previous work (Int. J. Polym. Mater. Polym. Biomater. 2016, 65, 269-276). PyPNVP has successfully acted as "turn off" chemosensor for metal ions Cu2+, Hg2+, and Pb2+. It has also successfully acted as a fluorescent probe for critical micellar concentration (CMC) determination of amphiphilic block copolymer of poly(d,l-lactide) and poly(N-vinylpyrrolidone) (PDLLA42-b-PNVP120) (Mn = 19 400 g/mol and PD = 1.52). It has also successfully shown an interaction with both plasmid and calf thymus (CT) deoxyribonucleic acids (DNAs) as evidenced by its fluorescence quenching. A different magnitude and type of quenching has been observed for both the cases which may be useful in distinguishing different kinds of DNAs. In order to further understand the potential of PyPNVP in various biotechnological processes, its binding property with bovine serum albumin (BSA) has also been studied. The efficient quenching of intrinsic fluorescence of BSA by PyPNVP through binding and the occurrence of the fluorescence resonance energy transfer (FRET) type of interaction have been studied using steady state, synchronous, and 3D fluorescence spectroscopies. Moreover, a fluorescence microscopic cell imaging study has revealed the significant uptake of PyPNVP in the nucleus of HEPG2 and U87 cells compared to free Py. In addition, the cytotoxicity study showed the tolerance of PyPNVP in all the cell lines tested with no significant cytotoxicity at lower concentrations.