Aluminum Phosphate Adjuvant Research Articles

Development of a Shigella conjugate vaccine targeting Shigella flexneri 6 that is immunogenic and provides protection against virulent challenge

Immunity protective against shigella infection targets the bacterial O-specific polysaccharide (OSP) component of lipopolysaccharide. A multivalent shigella vaccine would ideally target the most common global Shigella species and serotypes such as Shigella flexneri 2a, S. flexneri 3a, S. flexneri 6, and S. sonnei. We previously reported development of shigella conjugate vaccines (SCVs) targeting S. flexneri 2a (SCV-Sf2a) and 3a (SCV-Sf3a) using a platform squaric acid chemistry conjugation approach and carrier protein rTTHc, a 52 kDa recombinant protein fragment of the heavy chain of tetanus toxoid. Here we report development of a SCV targeting S. flexneri 6 (SCV-Sf6) using the same platform approach. We demonstrated that SCV-Sf6 was recognized by serotype-specific monoclonal antibodies and convalescent sera of humans recovering from shigellosis in Bangladesh, suggesting correct immunological display of OSP. We vaccinated mice and found induction of serotype-specific OSP and LPS IgG and IgM responses, as well as rTTHc-specific IgG responses. Immune responses were increased when administered with aluminum phosphate adjuvant. Vaccination induced bactericidal antibody responses against S. flexneri 6, and vaccinated animals were protected against lethal challenge with virulent S. flexneri 6. Our results assist in the development of a multivalent vaccine protective against shigellosis.

A Mixture of T-Cell Epitope Peptides Derived from Human Respiratory Syncytial Virus F Protein Conferred Protection in DR1-TCR Tg Mice.

Human respiratory syncytial virus (HRSV) poses a significant disease burden on global health. To date, two vaccines that primarily induce humoral immunity to prevent HRSV infection have been approved, whereas vaccines that primarily induce T-cell immunity have not yet been well-represented. To address this gap, 25 predicted T-cell epitope peptides derived from the HRSV fusion protein with high human leukocyte antigen (HLA) binding potential were synthesized, and their ability to be recognized by PBMC from previously infected HRSV cases was assessed using an ELISpot assay. Finally, nine T-cell epitope peptides were selected, each of which was recognized by at least 20% of different donors' PBMC as potential vaccine candidates to prevent HRSV infection. The protective efficacy of F-9PV, a combination of nine peptides along with CpG-ODN and aluminum phosphate (Al) adjuvants, was validated in both HLA-humanized mice (DR1-TCR transgenic mice, Tg mice) and wild-type (WT) mice. The results show that F-9PV significantly enhanced protection against viral challenge as evidenced by reductions in viral load and pathological lesions in mice lungs. In addition, F-9PV elicits robust Th1-biased response, thereby mitigating the potential safety risk of Th2-induced respiratory disease during HRSV infection. Compared to WT mice, the F-9PV mice exhibited superior protection and immunogenicity in Tg mice, underscoring the specificity for human HLA. Overall, our results demonstrate that T-cell epitope peptides provide protection against HRSV infection in animal models even in the absence of neutralizing antibodies, indicating the feasibility of developing an HRSV T-cell epitope peptide-based vaccine.

Concentrations, Number of Doses, and Formulations of Aluminium Adjuvants in Vaccines: A Systematic Review with Meta-Analysis and Trial Sequential Analysis of Randomized Clinical Trials.

Aluminium adjuvants are commonly used in vaccines to boost the effects of vaccination. Here, we assessed the benefits and harms of different aluminium adjuvants vs. other aluminium adjuvants or vs. the same aluminium adjuvant at other concentrations, administered a different number of doses, or at different particle sizes used in vaccines or vaccine excipients. We conducted a systematic review with meta-analysis and Trial Sequential Analysis to assess the certainty of evidence with Grading of Recommendations Assessment, Development and Evaluation (GRADE). We obtained data from major medical databases until 20 January 2023 and included 10 randomized clinical trials of healthy volunteers. The comparisons assessed higher vs. lower aluminium adjuvant concentrations; higher vs. lower number of doses of aluminium adjuvant; and aluminium phosphate adjuvant vs. aluminium hydroxide adjuvant. For all three comparisons, meta-analyses showed no evidence of a difference on all-cause mortality, serious adverse events, and adverse events considered non-serious. The certainty of evidence was low to very low. None of the included trials reported on quality of life or proportion of participants who developed the disease being vaccinated against. The benefits and harms of different types of aluminium adjuvants, different aluminium concentrations, different number of doses, or different particle sizes, therefore, remain uncertain.

An investigation on microfluidic preparation of aluminum phosphate adjuvant

An investigation on microfluidic preparation of aluminum phosphate adjuvant

Research Progress of Aluminum Phosphate Adjuvants and Their Action Mechanisms.

Although hundreds of different adjuvants have been tried, aluminum-containing adjuvants are by far the most widely used currently. It is worth mentioning that although aluminum-containing adjuvants have been commonly applied in vaccine production, their acting mechanism remains not completely clear. Thus far, researchers have proposed the following mechanisms: (1) depot effect, (2) phagocytosis, (3) activation of pro-inflammatory signaling pathway NLRP3, (4) host cell DNA release, and other mechanisms of action. Having an overview on recent studies to increase our comprehension on the mechanisms by which aluminum-containing adjuvants adsorb antigens and the effects of adsorption on antigen stability and immune response has become a mainstream research trend. Aluminum-containing adjuvants can enhance immune response through a variety of molecular pathways, but there are still significant challenges in designing effective immune-stimulating vaccine delivery systems with aluminum-containing adjuvants. At present, studies on the acting mechanism of aluminum-containing adjuvants mainly focus on aluminum hydroxide adjuvants. This review will take aluminum phosphate as a representative to discuss the immune stimulation mechanism of aluminum phosphate adjuvants and the differences between aluminum phosphate adjuvants and aluminum hydroxide adjuvants, as well as the research progress on the improvement of aluminum phosphate adjuvants (including the improvement of the adjuvant formula, nano-aluminum phosphate adjuvants and a first-grade composite adjuvant containing aluminum phosphate). Based on such related knowledge, determining optimal formulation to develop effective and safe aluminium-containing adjuvants for different vaccines will become more substantiated.

Impact of aluminum adjuvants on the stability of pneumococcal polysaccharide-protein conjugate vaccines

Development of a vaccine drug product requires formulation optimization to ensure that the vaccine’s effectiveness is preserved upon storage throughout the shelf-life of the product. Although aluminum adjuvants have been widely used in vaccine formulations to safely and effectively potentiate an immune response, careful attention must be directed towards ensuring that the type of aluminum adjuvant does not impact the stability of the antigenic composition. PCV15 is a polysaccharide-protein conjugate vaccine comprising the pneumococcal polysaccharide (PnPs) serotypes (1, 3, 4, 5, 6A, 6B, 7F, 9V, 14, 18C, 19A, 19F, 22F, 23F and 33F), each individually conjugated to the protein carrier CRM197. PCV15 was formulated with either amorphous aluminum hydroxyphosphate sulfate adjuvant (AAHS) or aluminum phosphate adjuvant (AP) and examined for both stability and immunogenicity. Using a collection of methods to evaluate vaccine stability, it was discovered that certain PCV15 serotypes (e.g., 6A, 19A, 19F) formulated with AAHS resulted in a reduction of immunogenicity in vivo and a reduction in recoverable dose as tested by an in vitro potency assay. The same polysaccharide-protein conjugates formulated with AP were stable regarding all measures tested. Moreover, the reduction in potency of certain serotypes correlated with chemical degradation of the polysaccharide antigen caused by the aluminum adjuvant as measured by reducing polyacrylamide gel electrophoresis (SDS-PAGE), High-Pressure Size Exclusion Chromatography coupled with UV detection (HPSEC-UV) and ELISA immunoassay. This study suggests a formulation, which includes AAHS, may negatively impact the stability of a pneumococcal polysaccharide-protein conjugate vaccine that contains phosphodiester groups. This decrease in stability would likely result in a decrease in the “active” concentration of antigen dose, and herein, it is shown that such instability directly compromised vaccine immunogenicity in an animal model. The results presented in this study help to explain critical degradation mechanisms of pneumococcal polysaccharide-protein conjugate vaccines.

A Synthetic SARS-CoV-2-Derived T-Cell and B-Cell Peptide Cocktail Elicits Full Protection against Lethal Omicron BA.1 Infection in H11-K18-hACE2 Mice.

Emerging variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have been developing the capacity for immune evasion and resistance to existing vaccines and drugs. To address this, development of vaccines against coronavirus disease 2019 (COVID-19) has focused on universality, strong T cell immunity, and rapid production. Synthetic peptide vaccines, which are inexpensive and quick to produce, show low toxicity, and can be selected from the conserved SARS-CoV-2 proteome, are promising candidates. In this study, we evaluated the effectiveness of a synthetic peptide cocktail containing three murine CD4+ T-cell epitopes from the SARS-CoV-2 nonspike proteome and one B-cell epitope from the Omicron BA.1 receptor-binding domain (RBD), along with aluminum phosphate (Al) adjuvant and 5' cytosine-phosphate-guanine 3' oligodeoxynucleotide (CpG-ODN) adjuvant in mice. The peptide cocktail induced good Th1-biased T-cell responses and effective neutralizing-antibody titers against the Omicron BA.1 variant. Additionally, H11-K18-hACE2 transgenic mice were fully protected against lethal challenge with the BA.1 strain, with a 100% survival rate and reduced pulmonary viral load and pathological lesions. Subcutaneous administration was found to be the superior route for synthetic peptide vaccine delivery. Our findings demonstrate the effectiveness of the peptide cocktail in mice, suggesting the feasibility of synthetic peptide vaccines for humans. IMPORTANCE Current vaccines based on production of neutralizing antibodies fail to prevent the infection and transmission of SARS-CoV-2 Omicron and its subvariants. Understanding the critical factors and avoiding the disadvantages of vaccine strategies are essential for developing a safe and effective COVID-19 vaccine, which would include a more effective and durable cellular response, minimal effects of viral mutations, rapid production against emerging variants, and good safety. Peptide-based vaccines are an excellent alternative because they are inexpensive, quick to produce, and very safe. In addition, human leukocyte antigen T-cell epitopes could be targeted at robust T-cell immunity and selected in the conserved region of the SARS-CoV-2 variants. Our study showed that a synthetic SARS-CoV-2-derived peptide cocktail induced full protection against lethal infection with Omicron BA.1 in H11-K18-hACE2 mice for the first time. This could have implications for the development of effective COVID-19 peptide vaccines for humans.

Evaluation of cross-protection between S. Pneumoniae serotypes 35B and 29 in a mouse model

Pneumococcal conjugate vaccines (PCVs) have reduced vaccine-type pneumococcal disease but in turn have also resulted in replacement with non-vaccine serotypes. One such serotype, 35B, a multidrug resistant type, has been associated with an increase in disease.Mice were immunized intramuscularly with monovalent pneumococcal polysaccharide 35B conjugated to CRM197 containing aluminum phosphate adjuvant on days 0, 14, and 28. Pneumococcal enzyme-linked immunosorbent assay, opsonophagocytic killing assays, and competition OPA were performed for STs 35B and 29 to measure serotype-specific binding and functional antibodies. On day 52, mice were intratracheally challenged with S. pneumoniae ST29 to evaluate cross-protection.35B-CRM197 immunized mice had binding and functional antibodies to both PnPs 35B and 29. 35B-CRM197 immunized mice were 100% protected from IT challenge with S. pneumoniae ST29 as compared to 30% survival in the naïve group.Future vaccines containing polysaccharide 35B, such as the investigational 21-valent PCV, V116, may provide cross protection against the non-vaccine serotype 29 due to structural similarity.

Immunogenic characterization of AlPO4 adsorbed Td vaccine and liposome-mediated Td vaccine.

The purpose of this study was to compare the antigenic potency and stability of tetanus and diphtheria (Td) vaccines when combined with aluminum phosphate (AlPO4) and liposome adjuvants. In vitro and in vivo analyses were conducted using the single radial immunodiffusion method and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The Td vaccines were prepared with AlPO4 adsorption and liposome-mediated delivery, and protein antigens were characterized using these methods. The results revealed that the liposome-mediated Td vaccines exhibited higher immunogenicity compared to the AlPO4-adsorbed Td vaccines. Additionally, the liposome-mediated Td vaccines demonstrated higher stability as native antigens. This study highlights the importance of utilizing liposome adjuvants in vaccine development. The liposome-mediated Td vaccines showed enhanced immunogenicity and stability, making them a promising approach for improving vaccine efficacy. Understanding and optimizing adjuvant strategies can contribute to the development of effective vaccines against various diseases.

Counting the water: Characterize the hydration level of aluminum adjuvants using contrast matching small-angle neutron scattering

Adjuvants are often included in vaccine formulations to enhance and modulate immune responses against pathogenic antigens. Aluminum-based adjuvants are prepared as hydrated colloids and are widely used due to their high efficacy and strong safety record. Previous studies have shown that freezing and thawing of aluminum adjuvants can lead to the aggregation of adjuvant particles, resulting in reduced vaccine potency. In this study, we demonstrated the use of contrast-matching small-angle neutron scattering (SANS) as a tool to directly probe hydration states of aluminum adjuvants in solution. Our study shows that aluminum hydroxide and aluminum phosphate adjuvants could be represented with the hydrated forms of Al(OH)3•2 H2O and AlPO4•1.5 H2O respectively. Moreover, our results demonstrate that freeze-thaw stress could lead to the dehydration of aluminum adjuvants, followed by aggregation of dehydrated adjuvant particles. Including sucrose in samples reduced freeze-thaw-induced dehydration of aluminum adjuvants, which in turn, inhibited the formation of large aggregates. The relationship between freeze-thaw-induced dehydration and aggregation of aluminum adjuvants could be used to explain the loss of adjuvanticity upon accidental freezing and thawing, and thus enable the more efficient development of thermostable vaccine products.

Aluminum Hydroxide And Aluminum Phosphate Adjuvants Elicit A Different Innate Immune Response

Aluminum hydroxide (Al(OH)3) and aluminum phosphate (AlPO4) are widely used adjuvants in human vaccines. However, a rationale to choose one or the other is lacking since the differences between molecular mechanisms of action of these adjuvants are unknown. In the current study, we compared the innate immune response induced by both adjuvants in vitro and in vivo. Proteome analysis of human primary monocytes was used to determine the immunological pathways activated by these adjuvants. Subsequently, analysis of immune cells present at the site of injection and proteome analysis of the muscle tissue revealed the differentially regulated processes related to the innate immune response in vivo. Incubation with Al(OH)3 specifically enhanced the activation of antigen processing and presentation pathways in vitro. In vivo experiments showed that only intramuscular (I.M.) immunization with Al(OH)3 attracted neutrophils, while I.M. immunization with AlPO4 attracted monocytes/macrophages to the site of injection. In addition, only I.M. immunization with Al(OH)3 enhanced the process of hemostasis after 96 hours, possibly related to neutrophilic extracellular trap formation. Both adjuvants differentially regulated various immune system-related processes. The results show that Al(OH)3 and AlPO4 act differently on the innate immune system. We speculate that these different regulations affect the interaction with cells, due to the different physicochemical properties of both adjuvants.

Aggregation and Size Attributes Analysis of Unadsorbed and Adjuvant-adsorbed Antigens using a Multispectral Imaging Flow Cytometer Platform

Various vaccine quality attributes should be monitored to ensure consistency, potency, purity, and safety of vaccine products prior to lot release. Vaccine particle size and protein antigen aggregation are two important considerations for particle-adsorbed vaccines. In this study, we evaluated the use of imaging flow cytometry as a potential all-in-one platform to measure adjuvant particle size and to detect protein aggregates through a combination of brightfield microscopy, side scatter detection, and fluorescence microscopy. An aluminum phosphate adjuvant was analyzed for size using the brightfield function, and the size measurement was compared against laser diffraction. Heat-induced protein aggregates of either unadsorbed antigens or aluminum phosphate adjuvant-adsorbed antigens were stained with the fluorescent ProteoStat aggregation dye, followed by detection and analysis using a combination of the brightfield and fluorescence microscopy functions. The change in aggregation of unadsorbed antigens was confirmed using dynamic light scattering. These results demonstrate the versatility of the imaging flow cytometry platform for the evaluation of multiple vaccine quality characteristics.

Engineering aluminum hydroxyphosphate nanoparticles with well-controlled surface property to enhance humoral immune responses as vaccine adjuvants

Aluminum phosphate adjuvants play a critical role in human inactivated and subunit prophylactic vaccines. However, a major challenge is that the underlying mechanism of immune stimulation remains poorly understood, which impedes the further optimal design and application of more effective adjuvants in vaccine formulations. To address this, a library of amorphous aluminum hydroxyphosphate nanoparticles (AAHPs) is engineered with defined surface properties to explore the specific mechanism of adjuvanticity at the nano-bio interface. The results demonstrate that AAHPs could induce cell membrane perturbation and downstream inflammatory responses, with positively-charged particles showing the most significantly enhanced immunostimulation potentials compared to the neutral or negatively-charged particles. In a vaccine using Staphylococcus aureus (S. aureus) recombinant protein as antigens, the positively-charged particles elicit long-lasting and enhanced humoral immunity, and provide protection in S. aureus sepsis mice models. In addition, when formulated with human papillomavirus type 18 virus-like particles, it is demonstrated that particles with positive charges outperform in promoting serum antigen-specific antibody productions. This study shows that engineering AAHPs with well-controlled physicochemical properties enable the establishment of a structure-activity relationship that is critical to instruct the design of suitable engineered nanomaterial-based adjuvants within vaccine formulations for the benefits of human health.

Safety and immunogenicity of an HIV-1 gp120-CD4 chimeric subunit vaccine in a phase 1a randomized controlled trial

A major challenge for HIV vaccine development is to raise anti-envelope antibodies capable of recognizing and neutralizing diverse strains of HIV-1. Accordingly, a full length single chain (FLSC) of gp120-CD4 chimeric vaccine construct was designed to present a highly conserved CD4-induced (CD4i) HIV-1 envelope structure that elicits cross-reactive anti-envelope humoral responses and protective immunity in animal models of HIV infection. IHV01 is the FLSC formulated in aluminum phosphate adjuvant. We enrolled 65 healthy adult volunteers in this first-in-human phase 1a randomized, double-blind, placebo-controlled study with three dose-escalating cohorts (75 µg, 150 µg, and 300 µg doses). Intramuscular injections were given on weeks 0, 4, 8, and 24. Participants were followed for an additional 24 weeks after the last immunization. The overall incidence of adverse events (AEs) was not significantly different between vaccinees and controls. The majority (89%) of vaccine-related AE were mild. The most common vaccine-related adverse event was injection site pain. There were no vaccine-related serious AE, discontinuation due to AE, intercurrent HIV infection, or significant decreases in CD4 count. By the final vaccination, all vaccine recipients developed antibodies against IHV01 and demonstrated anti-CD4i epitope antibodies. The elicited antibodies reacted with CD4 non-liganded Env antigens from diverse HIV-1 strains. Antibody-dependent cell-mediated cytotoxicity against heterologous infected cells or gp120 bound to CD4+ cells was evident in all cohorts as were anti-gp120 T-cell responses. IHV01 vaccine was safe, well tolerated, and immunogenic at all doses tested. The vaccine raised broadly reactive humoral responses against conserved CD4i epitopes on gp120 that mediates antiviral functions.

PAT solutions to monitor adsorption of Tetanus Toxoid with aluminum adjuvants

The focus of this study was to examine the small-scale adsorption process of Tetanus Toxoid (TT) as a model protein antigen to aluminum phosphate (AlPO4) and aluminum oxyhydroxide (AlOOH) adjuvants with real-time monitoring by in-line ReactIR™, ParticleTrack™ based on Focused Beam Reflectance Measurement (FBRM) and EasyViewer™ probes. The adsorption process of AlPO4 and AlOOH with TT using was monitored in the small-scale reactors. Conformational changes in TT were monitored using in-line infrared probe ReactIR, whereas particle formation associated with protein adsorption were measured by particle size, count, and imaging tools, such as ParticleTrack with FBRM and EasyViewer probes. ParticleTrack distribution results and kinetic measurements were also supported by observations made using EasyViewer. In addition to EasyMax, BioBLU reactor was also used for the adsorption experiments. ReactIR with ATR-Fiber probe was effectively able to monitor adsorption progress of TT to AlOOH and to AlPO4. ReactIR, EasyViewer, and ParticleTrack provided detailed mechanistic and kinetic information for reaction of TT with AlPO4 and AlOOH. These in-situ measurements revealed a possible multi-step process for TT to AlPO4 which may be an indication of antigen adsorption.

Respiratory syncytial virus prefusogenic fusion (F) protein nanoparticle vaccine: Structure, antigenic profile, immunogenicity, and protection

Respiratory syncytial virus (RSV) is a major cause of severe respiratory disease in the very young, elderly, and immunocompromised for which there is no vaccine. The surface exposed RSV fusion (F) glycoprotein is required for membrane fusion and infection and is a desirable vaccine candidate. RSV F glycoprotein structure is dynamic and undergoes significant rearrangements during virus assembly, fusion, and infection. We have previously described an RSV fusion-inactive prefusogenic F with a mutation of one of two furin cleavage sites resulting in the p27 region on the N-terminus of F1 with a truncated fusion peptide covalently linked to F2. A processing intermediate RSV prefusogenic F has been reported in infected cells, purified F, budded virus, and elicited a strong immune response against p27 in RSV infected young children. In this report, we demonstrate that prefusogenic F, when expressed on the cell surface of Sf9 insect and human 293T cells, binds monoclonal antibodies (mAbs) that target prefusion-specific antigenic sites Ø and VIII, and mAbs targeting epitopes common to pre- and postfusion F sites II and IV. Purified prefusogenic F bound prefusion F specific mAbs to antigenic sites Ø and VIII and mAbs targeting pre- and postfusion sites II, IV, and p27. Mice immunized with prefusogenic F antigen produced significantly higher levels of anti-F IgG and RSV neutralizing antibodies than prefusion or postfusion F antigens and induced antibodies competitive with mAbs to sites Ø, VIII, II, and IV. RSV prefusogenic F neutralization antibody responses were enhanced with aluminum phosphate adjuvant and significantly higher than prefusion F. Prefusogenic F vaccine protected cotton rats against upper and lower respiratory tract infection by RSV/A. For the first time, we present the structure, antigenic profile, immunogenicity, and protective efficacy of RSV prefusogenic F nanoparticle vaccine.

Stabilised aluminium phosphate nanoparticles used as vaccine adjuvant

Aluminium phosphate is a commonly used adjuvant consisting of heterogeneously sized aggregates up to several micrometers. However, aluminium phosphate nanoparticles may exhibit an improved adjuvant effect. In this study, nanoparticles were made by sonication of commercially available aluminium phosphate adjuvant, resulting in particles with a size (Z-average diameter) between 200–300 nm and a point of zero charge of 4.5. To prevent reaggregation, which occurred within 14 days, a screening of excipients was performed to identify stabilisers effective under physiological conditions (pH 7.4, 290 mOsm). The amino acids threonine, asparagine, and L-alanyl-L-1-aminoethylphosphonic acid (LAPA) stabilised sonicated aluminium phosphate. Particle sizes remained stable between 400–600 nm at 37 °C during 106 days. Contrarily, arginine induced strong reaggregation to a particle size larger than 1000 nm. The stability of aluminium phosphate nanoparticles was strongly affected by the pH. Aggregation mainly occurred below pH 7. The adsorption capacity, a potentially relevant parameter for adjuvants, was slightly reduced in the presence of asparagine, when using a model antigen (lysozyme). LAPA, arginine, threonine and aspartic acid reduced protein adsorption significantly. The adjuvant effect of aluminium phosphate nanoparticles was studied by immunisation of mice with diphtheria toxoid adjuvanted with the aluminium phosphate nanoparticles. The presence of LAPA, threonine, aspartic acid or asparagine did not alter diphtheria toxoid-specific antibody or toxin-neutralising antibody titres. Arginine increased diphtheria toxoid-specific antibody titres but not toxin-neutralising antibody titres. In conclusion, aluminium phosphate nanoparticles were stabilised by particular amino acids and induced an adjuvant effect comparable to that of aluminium phosphate microparticles.

A dose ranging study of 2 different formulations of 15-valent pneumococcal conjugate vaccine (PCV15) in healthy infants

ABSTRACTBackground: Two new formulations of an investigational 15-valent pneumococcal conjugate vaccine (PCV15-A and PCV15-B) were developed using 2 different protein-polysaccharide conjugation processes and evaluated in separate phase I/II studies (NCT02037984 [V114-004] and NCT02531373 [V114-005]) to assess optimal concentrations of pneumococcal polysaccharide (PnPs) and Aluminum Phosphate Adjuvant.Methods: Various lots of PCV15-A and PCV15-B containing different concentrations of PnPs and/or adjuvant were compared to PCV13 in young adults and infants. Adults received single dose and infants received 4 doses at 2, 4, 6, and 12–15 months of age. Adverse events (AEs) were collected after each dose. Serotype-specific immunoglobulin G (IgG) concentrations and opsonophagocytic activity (OPA) were measured prior and 30 days postvaccination in adults, at 1 month postdose 3 (PD3), pre-dose4, and postdose 4 (PD4) in infants.Results: Safety profiles were comparable across vaccination groups. At PD3, serotype-specific IgG GMCs were generally lower for either PCV15 formulation than PCV13 for most shared serotypes. PCV15 consistently elicited higher antibody responses to the 2 serotypes unique to the vaccine (22F and 33F) and serotype 3 for which PCV13 was shown to be ineffective. Except for serotypes 6A and 6B, no dose-response effect was observed with increasing concentrations of PnPs and/or adjuvant.Conclusion: PCV15 is safe and induces IgG and OPA responses to all 15 serotypes in the vaccine. No significant differences in antibody responses were observed with increases in PnPs and/or Aluminum Phosphate Adjuvant.

Synthesis and immunogenicity of the Mycobacterium tuberculosis arabinomannan-CRM197 conjugate.

Lipoarabinomannan (LAM) is a major structural surface component of Mycobacterium tuberculosis. This study describes the synthesis of the well-defined lipoarabinomannan (LAM) specific dodecasaccharide-protein conjugate and immunological studies. Arabinomannan (AM) dodecasaccharide has been efficiently synthesized and covalently conjugated to carrier proteins, including cross reactive mutant (CRM197) diphtheria toxoid and bovine serum albumin (BSA) for novel neoglycoconjugates, creating a potent T-dependent conjugate vaccine. Preliminary mice immunization studies on the neoglycoconjugate revealed that it could give rise to a strong IgG antibody titer in mice at 4.0 μg dose with an aluminum phosphate adjuvant. AM-CRM197 shows potential as an excellent candidate for a new carbohydrate-based vaccine that would be capable of eliciting a protective immune response against tuberculosis.

Identity, Structure and Compositional Analysis of Aluminum Phosphate Adsorbed Pediatric Quadrivalent and Pentavalent Vaccines

PurposeThe goal of this study is to set an empirical baseline to map the structure-function relation of the antigens from the commercialized vaccine products. MethodsTo study the structural changes of protein antigens after adsorption several analytical tools including DLS, FTIR, Fluorescence, LD, and SEM have been used. ResultsAll antigens have shown wide range of hydrodynamic diameter from 7 nm to 182 nm. Upon adjuvantation, the size distribution has become narrow, ranging from 10 to 12 μm, and has been driven by the derived diameter of aluminum phosphate (AlPO4) adjuvant. Further to examine size and morphology of adsorbed antigens, SEM has been used. The SEM results have demonstrated that the AlPO4 adjuvant suspension and adsorbed proteins consist of submicron particles that form a continuous porous surface. Diphtheria Toxoid (DT), Tetanus Toxoid (TT), and chemically-modified Filamentous Haemagglutinin (FHA) have shown surface adsorption to AlPO4. Secondary structure alpha-helix and beta-sheet content of DT and TT has increased after adsorption to AlPO4 adjuvant as shown by FTIR, whereas no significant changes were noted for other protein antigens. The results from Intrinsic Fluorescence have shown a structural rearrangement in DT and TT, consistent with the FTIR results. Multivalent vaccine product identity has been determined by FTIR as unique fingerprint spectrum. ConclusionThe globular proteins such as DT and TT have shown changes in secondary structure upon adsorption to AlPO4, whereas fibrillar protein FHA has not been affected by adsorption. FTIR can be used as a lean technique to confirm product identity at different manufacturing sites.