Aluminum Ions Research Articles

A mixed Ce/Eu metal-organic framework for ratiometric detection of Al3+ ion.

As a heavy metal ion, excessive aluminum ions pose a serious threat to human health and the ecological environment. Developing a simple, efficient, and fast detection method to detect the content of aluminum ions is of great significance, especially for ensuring human health and ecological safety. Herein, the mixed rare earth metal-organic framework (Ce0.74Eu0.26TPTC and Ce0.62Eu0.38TPTC) were prepared based on simple ligand 1,1':4',1″-Terphenyl-2',4,4″,5'-tetracarboxylic acid (H4TPTC). The Ce0.74Eu0.26TPTC and Ce0.62Eu0.38TPTC have dual luminescence centers, which can be used as ratio fluorescent probes to detect Al3+ ions, making the detection results more accurate and reliable. Therefore, this work can promote the further development of rare earth-based MOFs in the detection of heavy metal ions.

Enhancing water purification efficiency with zirconium-mercaptosuccinic acid metal-organic framework integrated mixed matrix membranes: Synthesis, comprehensive characterization, and performance insights

The development of metal-organic framework (MOF) based membranes has shown great potential to address the bottlenecks in industrial wastewater treatment. This study emphasized a novel approach involving a zirconium-based MOF (Zr-MA-MOF) with mercaptosuccinic acid (MA) as a ligand for fabricating mixed matrix membranes (MMMs). These MMMs were fabricated using a polyethersulfone (PES) matrix embedded with different nanofiller loadings of 0.25, 0.5, 0.75, and 1.0 wt%. Consequently, this study investigated the impact of Zr-MA-MOF loadings on the membrane morphology and functional performance, particularly focusing on pure water flux, rejection of salts, heavy metals, and dyes, antifouling properties, and long-term stability. The MMM with a loading of 0.75 wt% Zr-MA-MOF emerged as a standout performer, delivering an exceptional water flux of 71 Lm−2h−1 and rejection efficiencies of 80, 74, and 99 % for divalent magnesium sulfate (MgSO4), monovalent sodium chloride (NaCl), and dyes (including methylene blue, congo red, and rose bengal), respectively. The heavy metal rejection capabilities of the Zr-MA-MOF membrane were equally remarkable, with rejection rates of 90, 92, and 94 % for arsenic, chromium, and aluminum ions, respectively. Furthermore, a flux recovery ratio of 92 % showcased the great potential for sustainable industrial applications. These findings revealed that the integration of Zr-MA-MOF into membrane technology holds great potential for water treatment processes, catering to both human consumption and industrial applications for diverse wastewater treatment needs.

Cluster intercalation of aluminum tetrachloride in AlN cathode: Exploration and analysis of aluminum ion batteries.

When chloroaluminate (AlCl4-) serves as the electrolyte, aluminum nitride (AlN) has shown promise as a cathode material in aluminum ion batteries. However, there is currently a lack of research on the mechanisms of charge transfer and cluster intercalation between AlCl4 and AlN cathode materials. Herein, first-principles calculations are employed to investigate the intercalation mechanism of AlCl4 within the AlN cathode. By calculating the formation energies of stage-1-5 AlN-AlCl4 intercalation compounds with the insertion of individual AlCl4 cluster, we found that the structure of the stage-4 intercalation compounds exhibits the highest stability, suggesting that when the clusters begin to intercalate, it is important to start with the formation of the stage-4 intercalation compounds. In the subsequent phases of the charging process (stages 1 and 2), the stabilized structure with four inserted clusters demonstrates two characteristics: the coexistence of standing and lying clusters and the insertion of two standing clusters in an upside-down doubly stacked configuration, which further improve the spatial utilization while maintaining the structural stability. In addition, we infer that a phenomenon of coexisting intercalation compounds with mixed stages will occur in the course of the charging and discharging processes. More importantly, the diffusion barrier of AlCl4 in AlN-AlCl4 intercalation compounds decreases with the reduction of stage number, ensuring the rate performance of batteries. Therefore, we expect that our work will contribute to comprehend the intercalation mechanism of AlCl4 into the AlN cathode materials of aluminum ion batteries, providing guidance for related experimental work.

Elucidating the Hydrolysis and Polymerization Reactions of Al3+‐Solvated Molecules by Reactive Molecular Dynamics Simulation

ABSTRACTUtilizing the reactive molecular dynamics (ReaxFF MD) simulation, we conducted a comprehensive study on the impact of basicity (OH−/Al3+ ratio), concentration, and temperature on the hydrolysis and polymerization reactions of Al3+‐solvated molecules. Through simulations, we analyzed the structural changes, energy fluctuations of the system, and the evolution patterns of reaction products under different parameters, which were subsequently validated by experimental data. The research results indicate that hydroxide ions in the solution directly influence the breakage of OH bonds in the coordinating water molecules of solvated aluminum ions. This, in turn, affects the number of H2O and OH− ions coordinated with Al3+, leading to changes in hydrolysis products. Additionally, the number of OH− ions surrounding Al3+ affects the electrostatic repulsion, making it easier for polymerization reactions to occur as the system approaches the point of zero charge. On the other hand, an increase in concentration and temperature enhances the frequency of cluster collisions, thus contributing to an increase in polymerization degree. The experimental results align closely with our simulated predictions. As the pH value increases, the particle size exhibits a trend of first increasing and then decreasing, reaching a maximum at the point of zero charge. Simultaneously, an increase in concentration also prompts an increase in particle size. The combination of these empirical results with simulations enhances the credibility and reliability of our model's predictive capabilities. This study not only expands our understanding of the relevant chemical reaction processes but also provides important theoretical support for practical applications in related fields.

Efficient Flotation Separation of Ilmenite and Olivine in a Weak Alkaline Pulp Using a Ternary Combination Collector Centered around Al3.

Due to the similar physical and chemical properties of ilmenite and olivine, separating them is challenging. The flotation process, with the use of collectors, is an effective method. In this study, a ternary collector consisting of aluminum ion (III), benzohydroxamic acid (BHA), and sodium oleate (NaOL) was prepared for the flotation separation of ilmenite and olivine. Through micro-flotation experiments, molecular dynamics simulation (MD), density functional theory (DFT), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis, the synergistic effect between the components of the ternary collector and the adsorption configuration on the surface of ilmenite was investigated. The results revealed that at pH = 8, Al (III), BHA, and NaOL could coordinate and adsorb effectively on the surface of ilmenite, enhancing its floatability for separation from olivine. The adsorption configuration differed from previous reports, showing a co-adsorption of multiple forms on the surface of ilmenite.

D-Orbital Induced Electronic Structure Reconfiguration toward Manipulating Electron Transfer Pathways of Metallo-Porphyrin for Enhanced AlCl2 + Storage.

The positive electrodes of non-aqueous aluminum ion batteries (AIBs) frequently encounter significant issues, for instance, low capacity in graphite (mechanism: anion de/intercalation and large electrode deformation induced) and poor stability in inorganic positive electrodes (mechanism: multi-electron redox reaction and dissolution of active materials induced). Here, metallo-porphyrin compounds (employed Fe2+, Co2+, Ni2+, Cu2+, and Zn2+ as the ion centers) are introduced to effectively enhance both the cycling stability and reversible capacity due to the formation of stable conjugated metal-organic coordination and presence of axially coordinated active sites, respectively. With the regulation of electronic energy levels, the d-orbitals in the redox reactions and electron transfer pathways can be rearranged. The 5,10,15,20-tetraphenyl-21H,23H-porphine nickle(II) (NiTPP) presents the highest specific capacity (177.1 mAh g-1), with an increment of 32.1% and 77.1% in comparison with the capacities of H2TPP and graphite, respectively, which offers a new route for developing high-capacity positive electrodes for stable AIBs.

Identification and Analysis of Aluminum-Activated Malate Transporter Gene Family Reveals Functional Diversification in Orchidaceae and the Expression Patterns of Dendrobium catenatum Aluminum-Activated Malate Transporters.

Aluminum-activated malate transporter (ALMT) genes play an important role in aluminum ion (Al3+) tolerance, fruit acidity, and stomatal movement. Although decades of research have been carried out in many plants, there is little knowledge about the roles of ALMT in Orchidaceae. In this study, 34 ALMT genes were identified in the genomes of four orchid species. Specifically, ten ALMT genes were found in Dendrobium chrysotoxum and D. catenatum, and seven were found in Apostasia shenzhenica and Phalaenopsis equestris. These ALMT genes were further categorized into four clades (clades 1-4) based on phylogenetic relationships. Sequence alignment and conserved motif analysis revealed that most orchid ALMT proteins contain conserved regions (TM1, GABA binding motif, and WEP motif). We also discovered a unique motif (19) belonging to clade 1, which can serve as a specifically identified characteristic. Comparison with the gene structure of AtALMT genes (Arabidopsis thaliana) showed that the gene structure of ALMT was conserved across species, but the introns were longer in orchids. The promoters of orchid ALMT genes contain many light-responsive and hormone-responsive elements, suggesting that their expression may be regulated by light and phytohormones. Chromosomal localization and collinear analysis of D. chrysotoxum indicated that tandem duplication (TD) is the main reason for the difference in the number of ALMT genes in these orchids. D. catenatum was chosen for the RT-qPCR experiment, and the results showed that the DcaALMT gene expression pattern varied in different tissues. The expression of DcaALMT1-9 was significantly changed after ABA treatment. Combining the circadian CO2 uptake rate, titratable total acid, and RT-qPCR data analysis, most DcaALMT genes were highly expressed at night and around dawn. The result revealed that DcaALMT genes might be involved in photosynthate accumulation. The above study provides more comprehensive information for the ALMT gene family in Orchidaceae and a basis for subsequent functional analysis.

The rare-earth elements recovered from the leachate of discarded phosphor by electrodeposition

ABSTRACT Recovering rare-earth elements (REEs) from discarded phosphors is an important solution to alleviate the current shortage of rare-earth resources, the aluminum element in discarded phosphors will badly affect the purity and recovery of rare-earth elements. An electrodeposition method for recovering the rare earth from the discarded phosphoric leachate was proposed to avoid the effecting of aluminum elements. The results show that the purity of the rare-earth oxides recovered reached 99.13% and the recovery rate of rare-earth elements reached 98.89% by adopting the optimal electrodeposition process with the help of the complexing agent glycine. Research has found that adding the complexing agent glycine can help rare-earth hydroxides precipitate at the cathode and inhibit aluminum ion precipitation by changing the aluminum deposition potential. Moreover, it was also found that the generation of OH- ions by reduction of NO3- in acid aqueous solution was a one-step irreversible reaction in the deposition process by cyclic voltammetry, which ensured the reliability of rare-earth hydroxide precipitation reaction.

Evaluation of the Stability and Antibacterial Activity of Burow's and Neo-Burow's Solutions was Prepared Using Different Methods

Burow's solution is a 13% aluminum acetate solution used for treating chronic suppurative otitis media. However, multiple formulations for Burow's and neo-Burow's solutions are used as in-hospital preparations. Each formulation uses different types and amounts of reagents, and takes a different time to prepare. Thus, the ions, including aluminum ion (Al3+), and other molecules in the prepared Burow's and neo-Burow's solutions are not identical, and the pH also differs. Furthermore, details about the antibacterial activity of these preparations are unknown. This study evaluated the stability and antibacterial activity of four Burow's and two neo-Burow's solutions prepared using different methods. Preparation times ranged from 20 min to 3 d, and the pH ranged from 2.2 to 4, meaning some solutions were more acidic or more basic than the pH 3 devised by Burow. In addition, the Al3+ concentrations ranged from 0.05 to 1.51 mol/L, meaning some solutions were more concentrated or diluted than 13% aluminum acetate (0.64 mol/L). One of the Burow's solutions we prepared produced a white residue after 14 d, making it difficult to ensure stability. In addition, confirming the antibacterial activity of another Burow's solution against the test bacteria was problematic. Despite the differences in pH and Al3+ concentrations between the various Burow's and neo-Burow's solutions, the antibacterial activity was equivalent. It was considered necessary to use the basic data obtained in this study to select a formulation for each hospital. Evaluation of the antibacterial activity of each formulation in clinical settings will be a subject for future study.

Intensive coagulation of secondary effluent to mitigate reverse osmosis membrane fouling at low temperatures: Strategies of pre-oxidation and coagulant aids addition

Conventional coagulation-sedimentation, typically used as a pretreatment for ultrafiltration-reverse osmosis, is ineffective in solving the problem of reverse osmosis membrane fouling at low temperatures. In this study, the coagulation enhancement effect of pre-oxidation and the addition of coagulant aids on conventional coagulation with polyaluminum chloride as a coagulant was investigated. The results showed that the addition of fly ash, powdered activated carbon, or diatomite as coagulant aids improved the reduction of turbidity, dissolved organic carbon (DOC), and ultraviolet absorbance at 254 nm (UV254), and also reduced the residual content of dissolved aluminum ions. Among them, diatomite was superior. Pre-oxidation before conventional coagulation increased the reduction of turbidity and UV254 by about 50 % and doubled the removal of proteins, polysaccharides, and DOC compared to conventional coagulation. Ozone was superior to sodium hypochlorite. The combination of ozone pre-oxidation and diatomite addition with conventional coagulation further increased the pollutant removal rate, with the removal rates of turbidity, UV254, polysaccharides, proteins, and DOC reaching 82.20 %, 52.35 %, 26.34 %, 24.89 %, and 26.38 %, respectively. In addition, the residual content of dissolved aluminum ions decreased to 0.84 mg/L. The reverse osmosis filtration simulation test showed that pretreating the feed water with the enhanced coagulation by the combination of ozone pre-oxidation and diatomite addition resulted in a slower decrease in membrane flux, reduced foulant content on the membrane surface, and the smallest increase in contact angle. The results of this research may offer a viable pretreatment method to reduce fouling in reverse osmosis membranes operating at low temperatures.

Constructing Electronic/Ionic‐Conductive Hydrogel with Soft Compliance and High Conductivity as Flexible Strain Sensor

Flexible sensors are garnering substantial interests for various promising applications, including medical electronics, environmental monitoring, and wearable devices. Developing a flexible sensor with high compliance, high sensitivity, and high reliability through the construction of a novel composite conductive hydrogel based on the synergistic enhancement effect of conductive polymers and metal ions is a remarkable achievement. Herein, an electronic/ionic‐conductive double network hydrogel (polypyrrole (PPy)/carboxymethyl cellulose (CMC)‐Al3+/polyvinyl alcohol (PVA)) with soft compliance, highly conductivity, and stability is presented. Moreover, owing to the synergistic reinforcement effect of the relatively immobilized “islands” of PPy particles and large amounts of movable “bridges” of aluminum ions (Al3+) within the double network hydrogel, the as‐optimized PPy/CMC‐Al3+/PVA composite gels exhibit excellent conductivity (σ = 3.47 ± 0.25 S m−1) and mechanical properties (E = 18.53 ± 0.67 kPa). Furthermore, it has been developed as strain sensors with relatively high linear sensitivity (gauge factor = 2.58) within a broad linearity range (0–400%). It can also be served as a monitoring devices for subtle physiological signals emanating from various parts of the human body. The robust sensor has great potential to be developed as wearable electronic devices and applied in healthcare monitoring fields.

Synthesis, mechanical characterization, and biocompatibility evaluation of Graphene-TiO2 reinforced alumina for biomedical applications

The study addresses the limited fracture toughness of Al2O3 ceramics by developing graphene-TiO2 reinforced alumina nanocomposites through pressing. Mechanical properties, including hardness, fracture toughness, and elasticity, were examined, alongside the structural characterization via XRD analysis and microstructure evaluation using SEM. Cytotoxicity and cell adhesion tests were conducted for in vitro biological evaluation. The inclusion of a graphene additive led to a nearly threefold increase in fracture toughness, reaching up to 8.161 MPa m1/2. Graphene doping induced a discernible shift to lower angles in the XRD pattern, revealing the presence of Al2O3, Al2TiO5, and TiO2 phases. Samples immersed in artificial body fluid for 14 days exhibited minimal ion release, with Titanium ion below 0.001 mg/L and aluminum ion below 0.05 mg/L, indicating a lack of significant ion release. The cytotoxic activity of the samples against NIH/3T3 cells was assessed through Alamar Blue analysis, revealing no significant change in cell viability after 48 h of exposure.

The Effective Separation of Gallium, Vanadium, and Aluminum from a Simulated Bayer Solution by Resin Exchange.

The effective recovery of gallium from wastewater discharge in the Bayer process is promising for the long-term development of gallium resources. The adsorption and desorption behavior of gallium (Ga), vanadium (V), and aluminum (Al) ions on a strong acidic styrene cation exchange resin (JK resin) from a simulated Bayer solution was systematically investigated by static experiments. The results showed that the optimum conditions for separating Ga from V and Al were at low temperatures and short contact times, with 78.30%, 15.16%, and 6.63% of the adsorption efficiency at 25 °C and 60 min, respectively, for Ga, V, and Al. The adsorption kinetics of Ga3+ conformed to the pseudo-second order model, and the static saturation adsorption capacity was 18.25 mg/g. The Langmuir model fitted the adsorption isotherm of gallium well, and the maximum adsorption capacity was 1.11 mg/g at 25 °C. FT-IR spectroscopy and XPS showed that the mechanism of the Ga3+ adsorption was only related to the interaction of the oxygen atoms of the amide oxime group (C=NOH). The separation of Ga, V, and Al can be achieved by desorbing 98% of Al with low concentrations of ammonia and 90% of Ga with low concentrations of hydrochloric acid. The results indicate that JK resin is an efficient adsorbent for separating gallium and vanadium in alkaline solutions.

Study on separation and purification of titanium alloys (TC4-6Al-4V) by molten salt electrolysis

With the widespread expansion of titanium applications and its significant increase in usage, the issue of recycling titanium resources after consumption has emerged. Focusing on titanium alloys with high usage, such as TC4 (Ti-6Al-4V), this article proposes a titanium separation and recovery method based on molten salt electrolysis. This method thoroughly analyzes the characteristics of elements in TC4 and electrochemical principles, ensuring that vanadium in the TC4 alloy does not undergo electrochemical dissolution when the electrolysis potential is below 0.3 V vs Pt. Subsequently, through electrochemical analysis, it was discovered that the precipitation of aluminum ions is influenced by concentration. Therefore, by controlling the concentration of aluminum in the eutectic molten salt, such as increasing the electrolyte concentration and shortening the electrolysis time, the precipitation of aluminum can be effectively avoided. Under the experimental conditions mentioned above, vanadium elements deposit at the bottom of the crucible in the form of anode slime, while aluminum dissolves and remains in the electrolyte. Meanwhile, titanium ions in the cathode region undergo electron reduction and deposit in the cathode area in the form of titanium, thus achieving precise separation of alloy elements. Experimental verification shows that the purity of the obtained titanium reaches 99.17 atomic percent. Therefore, this molten salt electrolysis method, which combines the physical properties of alloy elements with electrochemical principles, not only provides a new perspective for the separation and recovery of titanium and other critical metals, but also offers new research directions for the recovery technology of other alloy elements.

Analysis of Antioxidant Effects of Quercetin, Rutin and Phagnalon Rupestre on Rats Intoxicated by Aluminium

Aluminium (Al) is one of the most abundant chemical elements in nature and metal in the earth’s crust. Accumulation of Aluminium ions (Al3+) in target tissues results into formation of oxygen radicals causing oxidative damage through inducing cytotoxicity. The aim of this study is to analyse the antioxidant effect of selected polyphenols (quercetin, rutin and a medicinal plant phagnalon rupestre) on rats intoxicated by aluminium with specific focus on the heart.This experiment was carried out on 6 groups of wistar albino rats ,group 1; positive control, group 2; Al male intoxicated group treated with quercetin, group 3; Al male intoxicated group treated with rutin, group 4; Al female intoxicated, group 5; Al intoxicated treated with phagnalon rupestre , group 6; female control. Several Biochemical assays were carried out such as protein test, Thiobarbituric acid reactive substance (TBARS) assay, catalase assay (CAT), glutathione-s-transferase (GST) assay, superoxide dismutase (SOD) assay, Glutathione reduced and glutathione peroxidase (GSH & GPX) assay, lipids (cholesterol & triglycerides) assays. Aluminium intoxicated group showed decrease in the content of protein compared to the control and treated groups. Aluminium intoxicated group showed an increase in the activity of thiobarbituric reactive substances (TBARS) but a significant decrease in the activity of catalase (CAT), glutathione S transferase assays (GST) compared to the control group. Biomarkers of oxidative stress significantly reduced in heart Al-induced oxidative stress by administration of Quercetin. Therefore, Quercetin is an effective antioxidant against oxidative stress caused by free radicals produced because of aluminium exposure. Keywords: antioxidant ;aluminium ; quercetin ; rutin ; phagnalon rupestre

Effect of substitution of aluminium and neodymium on structural and magnetic properties of yttrium iron garnet studied using 57Fe internal field NMR

The structural and magnetic properties of non-magnetic aluminium and magnetic neodymium substituted yttrium iron garnet samples (Y3-xAlxFe5O12 and Y3-nNdnFe5O12) were investigated. Powder samples were synthesized using auto combustion route. The Rietveld refinement analysis of the samples confirmed the presence of the garnet phase and showed presence of minimal impurity phases, specifically perovskite and hematite. Substitution on Y3Fe5O12 with Al resulted in a linear decrease in saturation magnetization, while Nd substitution showed a non-linear change. In accordance with this the Internal Field Nuclear Magnetic Resonance (IFNMR) spectrum exhibited a downward shift in peak frequency when Al was substituted, and a significant reduction in intensity with Nd substitution in yttrium iron garnet samples. Aluminium ions take up either tetrahedral or octahedral positions in the lattice, apart from the dodecahedral site, because of their smaller ionic radii. This causes a decrease in the hyperfine field that originates from Fe3+ ions in tetrahedral and octahedral sites. On the other hand, neodymium ions occupy dodecahedral sites and are expected not to affect Fe ions. Concurrently, an observable peak shift was not observed in the IFNMR spectrum for Nd substitution. However, Nd substitution introduced strain in the lattice due to their larger ionic radii compared to yttrium, which they replace. This strain causes disorder in tetrahedral and octahedral sites and affects 57Fe signal intensity. The magnetic properties observed from VSM analysis is also interpreted in view of observed changes in the 57Fe IFNMR spectrum. X-ray Photoelectron spectroscopy (XPS) was employed mainly to explore spin orbit splitting of Fe 2p state in the samples.

A green and low-cost approach to recover graphite for high-performance aluminum ion battery cathode

The recovery of spent graphite (SG) from lithium-ion batteries (LIBs) has been neglected due to its relatively low value and the lack of effective recovery methods. In this study, a green and cost-effective water washing process was used to recycle the spent graphite of LIBs anode, and the recovered graphite (RG) was used as the cathode material of aluminum ion batteries (AIBs). The RG retained the integrated graphite structure after the water washing process, showing a slightly enlarged interlayer spacing. When used as a cathode material for AIBs, it exhibits better electrochemical performance than commercial artificial graphite. At a current density of 50 mA g−1, the RG shows a high specific capacity of 95.2 mAh g−1. At a high current density of 2000 mA g−1, the specific capacity still maintains 51 mAh g−1, demonstrating excellent rate performance. Meanwhile, the average specific capacity of 72.5 mAh g−1 was steadily cycled for 10,000 cycles at a current density of 1000 mA g−1, showing excellent cycle performance. This work provides a novel approach to the high-value-added application of spent graphite from lithium batteries and a development of high-performance graphite cathode materials for AIBs.

MoO3 nanobelts cathode promotes Al3+ insertion in aqueous aluminum-ion batteries

Aqueous aluminium ion batteries (AAIBs) have attracted much attention due to their high theoretical capacity, safety, and environmental friendliness. However, the Research and Development (R&D) of cathode materials has limited its development and application. MoO3 has been proven to be a reliable and stable cathode material, nevertheless, it faces the dilemma of poor cycling performance and low specific capacity in AAIBs due to the irreversible phase transition in its structure. In this paper, MoO3 synthesized by a hydrothermal method has a unique nanobelt structure, which significantly enhances the structural stability of MoO3 and reduces its structural damage during charging/discharging. In addition, the nanobelt structure also gives MoO3 a rougher surface, which provides a large number of active sites and spaces for the insertion and extraction of Al3+ and improves the diffusion rate of Al3+ to a large extent. Experimental results demonstrate that this MoO3 nanobelt cathode exhibits significantly improved cycling stability and high specific capacity in AAIBs. This paper provides a practical solution to the existing challenges of AAIBs and further promotes the development and application of molybdenum-based materials in AAIBs.

Novel approach for green synthesis of stable gold nanoparticles with dried turmeric root extract: investigations on sensor and catalytic applications.

In this study, we present the synthesis of gold nanoparticles (AuNPs) using a completely green synthesis method without the use of any additional functionalizing agent, except dried turmeric root extract. The significant synthesis parameters were optimized, and the applicability of AuNPs was investigated in areas such as plasmonic and fluorescent sensing of aluminum (Al3⁺) and chromium (Cr3⁺) ions, reduction of 4-nitrophenol (4-NP), and degradation of methylene blue (MB) and methyl orange (MO) dyes. Characterization studies were performed using UV-Vis spectroscopy, TEM, FTIR, and XRD, revealing that the AuNPs predominantly had a spherical morphology and a very small particle size of 8.5 nm, with stability maintained up to 120 days. The developed AuNP-based plasmonic sensors relied on aggregation-induced decreases in absorption, along with a red shift in the spectra. Fluorescence sensing demonstrated a linear increase in intensity with increasing concentrations of Al3⁺ and Cr3⁺, with detection limits of 0.83 and 1.19 nM, respectively. The catalytic activities of AuNPs were tested in reducing 4-NP and degradations of MB and MO dyes (binary system) in tap water and wastewater, with the reactions following pseudo-first-order kinetics. This study highlights the potential of AuNPs synthesized from turmeric roots for various environmental and sensing applications.

Effects of Enteromorpha prolifera sulfated polysaccharide and aluminium ion addition on the multifunctional property of conductive hydrogel for wearable strain sensing

Although introducing Enteromorpha prolifera sulfated polysaccharide (SPEP) enhances the mechanical properties of hydrogels significantly, little is known about the effects of polysaccharide and ion addition on morphological and physicochemical properties of conductive hydrogel. Therefore, the Poly (acrylic acid)/SPEPn/Al3+m (PAA/SPEPn/Al3+m) hydrogels with different SPEP and Al3+ addition were synthesized by simple one-pot method. The porosity, tensile strength, and swelling ration increased, while compressive strength, elongation at break, self-healing, self-adhesion properties increased first and then decreased as SPEP addition increased from 0 % to 3.80 %. The Al3+ addition increased from 0.08 % to 0.30 %, both tensile and compressive strength increased first and then decreased, while elongation at break kept increasing. Unexpectedly, both increasing SPEP and Al3+ addition reduced the electrical conductivity, while SPEP increased the gauge factor of hydrogel. The hydrogel exhibited optimal comprehensive properties when SPEP and Al3+ addition were 2.31 % and 0.24 %, respectively. The PAA/SPEP2.31%/Al3+0.24% hydrogel showed high tensile strength (107.60 kPa), elongation at break (2426.67 %), strain self-healing rate (81.87 %), adhesion strength (21.61 kPa), and conductivity (3.60 S/m). Overall, the properties of PAA/SPEPn/Al3+m hydrogels can be regulated through tailoring SPEP and Al3+ addition, which can be used as on-demand strategy to improve the performance of PAA/SPEPn/Al3+m hydrogels for each application.