27Al Magic Angle Spinning NMR Research Articles

Densification of sodium and magnesium aluminosilicate glasses at ambient temperature: structural investigations by solid-state nuclear magnetic resonance and molecular dynamics simulations.

Sodium and magnesium aluminosilicate glasses with compositions 20Na2O-20Al2O3-60SiO2 (NAS) and 20MgO-20Al2O3-60SiO2 (MAS) were subjected to a 12 and 25 GPa compression and decompression at room temperature, resulting in density increases from 3.7% to 5.3% (NAS) and from 8.2 to 8.4% (MAS), respectively. The pressurization at 25 GPa was done on 17O-enriched glasses, to facilitate characterization by 17O NMR. The structural changes associated with this process have been investigated by solid state 29Si, 27Al, 23Na, 25Mg, and 17O magic-angle spinning NMR and compared with the situation in thermally relaxed glasses and/or glasses prepared at ambient pressure. While in the Na aluminosilicate glass only subtle structural changes were observed in a sample densified at 12 GPa, the average coordination number of Al 〈CN(Al)〉 increases moderately from 4.00 to 4.26 by pressurization at 25 GPa. In the Mg-based system, 〈CN(Al)〉 increases from 4.34 to 4.57 to 4.83 in the sequence 10-4 GPa → 12 GPa → 25 GPa. The experimental result at 25 GPa was qualitatively confirmed by molecular dynamics (MD) simulations. Overall, pressurization results in more positive 29Si and 17O chemical shifts, most likely reflecting a reduction in the Si-O-Si and Si-O-Al bonding angles in the pressurized glasses. Furthermore, the results are also consistent with either an increased number of non-bridging O-atoms upon pressurization, or a larger number of Si-O-Al or Al-O-Al linkages. The significantly higher sensitivity of MAS, compared to NAS glass, to an increase in 〈CN(Al)〉 upon pressurization, provides a good structural rationale for its significantly higher crack initiation resistance.

In Situ Multinuclear Magic-Angle Spinning NMR: Monitoring Crystallization of Molecular Sieve AlPO4-11 in Real Time.

Molecular sieves are crystalline three-dimensional frameworks with well-defined channels and cavities. They have been widely used in industry for many applications such as gas separation/purification, ion exchange, and catalysis. Obviously, understanding the formation mechanisms is fundamentally important. High-resolution solid-state NMR spectroscopy is a powerful method for the study of molecular sieves. However, due to technical challenges, the vast majority of the high-resolution solid-state NMR studies on molecular sieve crystallization are ex situ. In the present work, using a new commercially available NMR rotor that can withhold high pressure and high temperature, we examined the formation of molecular sieve AlPO4-11 under dry gel conversion conditions by in situ multinuclear (1H, 27Al, 31P, and 13C) magic-angle spinning (MAS) solid-state NMR. In situ high-resolution NMR spectra obtained as a function of heating time provide much insights underlying the crystallization mechanism of AlPO4-11. Specifically, in situ 27Al and 31P MAS NMR along with 1H → 31P cross-polarization (CP) MAS NMR were used to monitor the evolution of the local environments of framework Al and P, in situ 1H → 13C CP MAS NMR to follow the behavior of the organic structure directing agent, and in situ 1H MAS NMR to unveil the effect of water content on crystallization kinetics. The in situ MAS NMR results lead to a better understanding of the formation of AlPO4-11.

Catalytic Enhancement of Cyclohexene Hydration by Ga-Doped ZSM-5 Zeolites

Ga-doped ZSM-5 zeolites were directly synthesized by a facile one-step hydrothermal method without organic templates and calcination and then investigated in the cyclohexene hydration reaction. The structure, component, textural properties, and acidity of the as-prepared samples were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), ammonia temperature-programmed desorption (NH3-TPD), pyridine-chemisorbed IR (Py-IR), and 71Ga, 27Al, 29Si, and 1H magic-angle spinning (MAS) NMR techniques. The characterization results showed that the introduction of Ga atoms into the ZSM-5 zeolite framework is much easier than Al atoms and beneficial to promote the formation of small-sized crystals. The number of Brønsted acid sites of Ga-doped ZSM-5 samples obviously increased compared with Ga0-ZSM-5. Additionally, the highest cyclohexanol yield (10.1%) was achieved over the Ga3-ZSM-5 sample, while the cyclohexanol yield of the Ga0-ZSM-5 sample was 8.6%. This result indicated that the improved catalytic performance is related to its larger external surface area, smaller particle size, and more Brønsted acid sites derived from Si–OH–Al and Si–OH–Ga of Ga3-ZSM-5. Notably, the green route reduces harmful gas emission and provides a basis for doping other heteroatoms to regulate the catalytic performance of zeolites, especially in industrial production.

Adsorption of HF on gibbsite calcined at various temperatures: A solid-state NMR study of low-level fluorinated systems

The fluorination mechanism of low-level fluorinated materials obtained by calcination of Bayer gibbsite at different temperatures was studied by 27Al and 19F solid-state NMR spectroscopy and X-ray diffraction. Gibbsite was calcined at 400, 600, 800, and 1000 °C followed by treatment with anhydrous HF/N2 gas at 100 °C. Three types of Al–F species on the surface of fluorinated gibbsite calcined at 400, 600, and 800 °C are proposed on the basis of the 19F magic angle spinning (MAS) NMR spectra, which show peaks at about −132, −137, and −163 ppm, while the spectrum of fluorinated gibbsite calcined at 1000 °C showed five additional peaks, at about −139, −164, −176, −183, and −191 ppm. The fluorination process in aluminas is based on elementary exchange reactions in which F− replaces surface –OH groups according to their basicity. The 27Al MAS NMR and 19F-27Al cross-polarization–MAS experiments confirmed the presence of octahedral Al species.

Combined effect of NaAlO2 and NaOH on the early age hydration of Portland cement with a high concentration of borate solution

The early age hydration of ordinary Portland cement in 5 M borate solution, with or without the addition of NaAlO2 and/or NaOH, was investigated. Hydration was measured using calorimetry, X-ray diffraction, thermogravimetric analysis, 11B and 27Al magic angle spinning NMR analysis, and scanning transmission electron microscopy. The purpose of this study was to reveal the mechanisms behind the retardation caused by a high concentration borate solution and the restoration of hydration through the combined addition of NaOH and NaAlO2. Amorphous ulexite, which formed on the surface of the cement particles and prevented the further dissolution of anhydrous phases, was identified as the retardation product. The mechanism of the combined addition of NaAlO2 and NaOH in overcoming retardation was to transform amorphous ulexite into B-AFt and gowerite (CaB6O10·5H2O). Formation of gowerite is favorable because of the much higher boron immobilization capacity in weight percentage, comparing to usual boron-containing phases reported previously.

A new quaternary Li0.19Al2.72O3.64N0.36 transparent ceramic with high hardness

A new quaternary Li0.19Al2.72O3.64N0.36 transparent ceramic with the Vickers hardness of 17.91 ± 0.2 GPa at a load of 9.8 N and the in-line transmittance of 83.4% at 3.5 µm was prepared by hot isostatic press sintering (HIP) after pressureless sintering. The 7Li and 27Al magic-angle spinning (MAS) NMR spectra combined with the XRD Rietveld refinement was adopted to analyze the crystal structure. It is revealed that all the lithium ions are located in octahedra and the cation vacancies are mainly concentrated in tetrahedra. Based on the bond valance models, the complicated relationship among composition, crystal structure and intrinsic hardness of the spinel-type transparent ceramic were disclosed. Compared with the γ-AlON, the higher hardness of Li0.19Al2.72O3.64N0.36 transparent ceramic is attributed to the coupling effect of enhanced hardness of bonds in octahedra and the slightly weakened hardness of bonds in tetrahedra.

Hydrocracking of Polyethylene to Jet Fuel Range Hydrocarbons over Bifunctional Catalysts Containing Pt- and Al-Modified MCM-48

A low-density polyethylene was hydrocracked to liquid hydrocarbons in autoclave reactors over catalysts containing Pt- and Al-modified MCM-48. Two kinds of Al-modified MCM-48 were synthesized for the reaction: Al-MCM-48 was synthesized using a sol–gel method by mixing Al(iso-OC3H7)3 with Si(OC2H5)4 and surfactant in a basic aqueous solution before hydrothermal synthesis, and Al/MCM-48 was synthesized using a post-modification method by grafting Al3+ ions on the surface of calcined Al/MCM-48. X-ray diffraction (XRD) patterns indicated that both Al-MCM-48 and Al/MCM-48 had a cubic mesoporous structure. The Brunauer–Emmett–Teller (BET) surface areas of Al-MCM-48 and Al/MCM-48 were larger than 1000 m2/g. 27Al Magic Angle Spinning-NMR (MAS NMR) indicated that Al3+ in Al-MCM-48 was located inside the framework of mesoporous silica, but Al3+ in Al/MCM-48 was located outside the framework of mesoporous silica. The results of ammonia temperature-programmed desorption (NH3-TPD) showed that the acidic strength of various samples was in the order of H-Y > Al/MCM-48 > Al-MCM-48 > MCM-48. After 4 MPa H2 was charged in the autoclave at room temperature, 1 wt % Pt/Al/MCM-48 catalyst showed a high yield of C9−C15 jet fuel range hydrocarbons of 85.9% in the hydrocracking of polyethylene at 573 K for 4 h. Compared with the reaction results of Pt/Al/MCM-48, the yield of light hydrocarbons (C1−C8) increased over Pt/H-Y, and the yield of heavy hydrocarbons (C16−C21) increased over Pt/Al-MCM-48 in the hydrocracking of polyethylene. The yield of C9−C15 jet fuel range hydrocarbons over the used catalyst did not decrease compared to the fresh catalyst in the hydrocracking of polyethylene to jet fuel range hydrocarbons over Pt/Al/MCM-48.

Molecular-Level to Cell-Level Understanding of the High-Rate Cycling Capability of Rechargeable Aluminum-Graphite Batteries

Rechargeable aluminum-graphite batteries using chloroaluminate-containing ionic liquid electrolytes are a promising beyond-lithium technology because they utilize electrodes that are globally abundant, low-cost, and inherently safe.1,2 Notably, these batteries have demonstrated ultrafast charge/discharge rates, which are critical for advancing high-power and rapid-charging applications such as electric transportation. Since Lin et al.’s pioneering report in 2015, several groups have engineered graphene-like materials to further improve the high-rate capability and capacity retention to as high as 120 mAh/g @ 400 A/g, on the cell-level.3 Recently, we elucidated the relationship between mesoscale graphite structure and macroscopic electrochemical properties such as high-rate performance.4 However, molecular-level understanding of the electrochemical charge storage mechanism upon cycling, which involves the intercalation of sterically bulky, molecular AlCl4 - anions into graphite, remains incomplete. To better understand what enables such rapid molecular-level ionic diffusion and consequently high-rate cell-level cycling, we combined electrochemical studies with solid-state 27Al magic-angle-spinning (MAS) NMR and density functional theory (DFT) to understand the molecular-level environments and ion transport properties of intercalated AlCl4 - anions.First, to directly observe local environments of chloroaluminate species intercalated within the graphite electrodes, solid-state 27Al MAS NMR measurements were acquired on intercalated graphite electrodes at various states-of-charge. DFT calculations were performed to simulate different molecular geometries of intercalated AlCl4 - anions. Correlation of experimental NMR and DFT results established that the high extents of local disorder observed in the experimental solid-state 27Al NMR spectra can be attributed to distributions of intercalated chloroaluminate anions in different molecular configurations. Second, to address the technological objective of further improving the high-rate capacity retention of graphite electrodes, we employed liquid-phase exfoliation and centrifugation to modify the c-axis thickness of the highly ordered pristine graphites. In full-cell electrochemical tests of the exfoliated-graphite electrodes, variable-rate galvanostatic cycling revealed increased capacity retention, while variable-rate cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT) experiments revealed modified effective ionic diffusivities and ohmic resistances. Collectively, this multi-scale study of chloroaluminate intercalation into graphitic electrodes has revealed new insights that are key contributing factors to their high-rate capability, which can be adapted to engineer Al-graphite batteries with enhanced performance.(1) Lin, M.-C.; Gong, M.; Lu, B.; Wu, Y.; Wang, D.-Y.; Guan, M.; Angell, M.; Chen, C.; Yang, J.; Hwang, B.-J.; Dai, H. An Ultrafast Rechargeable Aluminium-Ion Battery. Nature 2015, 520, Pages: 324–328.(2) Sun, H.; Wang, W.; Yu, Z.; Yuan, Y.; Wang, S.; Jiao, S. A New Aluminium-Ion Battery with High Voltage, High Safety and Low Cost. Chem. Commun. 2015, 51, 11892–11895.(3) Chen, H.; Xu, H.; Wang, S.; Huang, T.; Xi, J.; Cai, S.; Guo, F.; Xu, Z.; Gao, W.; Gao, C. Ultrafast All-Climate Aluminum-Graphene Battery with Quarter-Million Cycle Life. Sci. Adv. 2017, 3.(4) Xu, J. H.; Turney, D. E.; Jadhav, A. L.; Messinger, R. J. Effects of Graphite Structure and Ion Transport on the Electrochemical Properties of Rechargeable Aluminum-Graphite Batteries. ACS Appl. Energy Mater. 2019, 2, 7799–7810.

Local Structures of Two-Dimensional Zeolites-Mordenite and ZSM-5-Probed by Multinuclear NMR.

Mesostructured pillared zeolite materials in the form of lamellar phases with a crystal structure of mordenite (MOR) and ZSM-5 (MFI) were grown using CTAB as an agent that creates mesopores, in a one-pot synthesis; then into the CTAB layers separating the 2D zeolite plates were introduced by diffusion the TEOS molecules which were further hydrolyzed, and finally the material was annealed to remove the organic phase, leaving the 2D zeolite plates separated by pillars of silicon dioxide. To monitor the successive structural changes and the state of the atoms of the zeolite framework and organic compounds at all the steps of the synthesis of pillared MOR and MFI zeolites, the nuclear magnetic resonance method (NMR) with magic angle spinning (MAS) was applied. The 27Al and 29Si MAS NMR spectra confirm the regularity of the zeolite frameworks of the as synthetized materials. Analysis of the 1H and 13C MAS NMR spectra and an experiment with variable contact time evidence a strong interaction between the charged “heads” –[N(CH3)3]+ of CTAB and the zeolite framework at the place of [AlO4]− location. According to 27Al and 29Si MAS NMR the evacuation of organic cations leads to a partial but not critical collapse of the local zeolite structure.

Characterization of fly ash-cement paste and molecular structure in the presence of seawater by 27Al and 29Si MAS NMR spectroscopy

Cement-based materials commonly suffer attacking from detrimental ions in marine environment and the degradation mechanism for material is complicated. To study the effect of curing stage on degradation process, the microstructure and molecular structure of fly ash and Portland cement paste curing at 1 day, 7 day, 14 day and 28 day with w/c ratio of 0.35 in seawater solutions for 90 days are investigated by 27Al and 29Si magic-angle spinning (MAS) NMR spectroscopy, XRD and SEM tests. It reveals that more Friedal salt and Aft hydration phase are formed when the samples curing at early stage (1 day) are immersed in the sea water due to unhydrated and porous microstructure subject to sulfate and chloride ions. Based on the 29Si spectrum analysis, the increasing of mean silicate chain length of C-S-H and the degrading for AlO4/SiO4 ratio demonstrate that detrimental ions in seawater lead to the de-aluminization and polymerization for the cement hydrate. Furthermore, 27Al NMR test observes phase transformation from Al[4] in C-S-H gel to Al[6] Aft phase for samples in marine environment. Prolonging the curing age and incorporating fly ash in cement paste can significantly help resist the degradation for aluminate-silicate chains in C-S-H gel and aluminate phase transformation. More importantly, the hydration degrees for cement and fly ash computed separately illustrate that the aggressive ions in seawater act as activating role on fly ash, contributing to the secondary hydration of fly ash–cement paste. The activation effect is more pronounced for samples suffer to marine environment especially in the very early curing age, which significantly help resist aggressive ions as the cement paste in low hydration degree. Hopefully, this study can provide valuable insights on design of durable and sustainable marine concrete.

Elucidating Aluminum-Ion Intercalation and Its Effects on the Local Crystalline Framework Using Solid-State NMR Spectroscopy

Rechargeable multivalent-ion batteries are safe and low-cost alternatives to traditional lithium-ion batteries. However, higher Coulombic charge density of the multivalent ions results into sluggish diffusion of their respective cations within crystalline transition metal compounds. The Chevrel phases Mo6X8, where X is a chalcogen atom (e.g., S or Se) are among the few materials known to reversibly and electrochemically intercalate both divalent (e.g. Mg2+, Zn 2+, etc.) and trivalent (Al3+) ions. Thus, understanding the ion intercalation and charge transfer mechanisms within these unique compounds may provide insights into the molecular-level design of new intercalation electrodes for rechargeable multivalent ion batteries. Here, we use multi-nuclear solid-state magic-angle-spinning (MAS) NMR spectroscopy to reveal the ion intercalation and charge transfer mechanisms of zinc and aluminum intercalation in Chevrel electrodes Mo6S8 and Mo6Se8. Ex situ single pulse solid-state 27Al MAS NMR measurements were performed on the thio-chevrel electrodes at different states-of-charge to observe changes in the environments and to quantify the local populations of aluminum ions within the host crystal structure, revealing both intercalated ions and additional aluminum species associated with surface layers and/or decomposition products. Al-Mo6Se8 batteries were made for the first time and their electrochemical properties were compared to the thio-chevrel Mo6S8. Ex situ 77Se and 95Mo measurements on the seleno-chevrel Mo6Se8 at charged and discharged states revealed that the electrons are transferred to the anionic chalcogen framework the electron charge transfer mechanism and its effects on the local crystalline framework environments upon aluminum ion intercalation. These results were then generalized for zinc intercalation into chevrel phase electrodes.Overall, the solid-state NMR measurements combined with the electrochemical measurements yield molecular-level insights into the coupled aluminum ion intercalation and electron charge transfer processes that occur in a model crystalline transition metal electrode. Unique reversible anionic redox reactions were observed for multivalent ion intercalation into chevrel, which is very different that typically observed for lithium-ion intercalation into transition metal oxides, where the electrons are stored into the d-orbitals of the transition metal. The results suggest materials design principles aimed at designing multivalent-ion intercalation electrodes with improved electrochemical properties. Figure 1

Al/Ga-Doped Li7La3Zr2O12 Garnets as Li-Ion Solid-State Battery Electrolytes: Atomistic Insights into Local Coordination Environments and Their Influence on 17O, 27Al, and 71Ga NMR Spectra.

Li7La3Zr2O12 (LLZO) garnets are among the most promising solid electrolytes for next-generation all-solid-state Li-ion battery applications due to their high stabilities and ionic conductivities. To help determine the influence of different supervalent dopants on the crystal structure and site preferences, we combine solid-state 17O, 27Al, and 71Ga magic angle spinning (MAS) NMR spectroscopy and density-functional theory (DFT) calculations. DFT-based defect configuration analysis for the undoped and Al and/or Ga-doped LLZO variants uncovers an interplay between the local network of atoms and the observed NMR signals. Specifically, the two characteristic features observed in both 27Al and 71Ga NMR spectra result from both the deviations in the polyhedral coordination/site-symmetry within the 4-fold coordinated Li1/24d sites (rather than the doping of the other Li2/96h or La sites) and with the number of occupied adjacent Li2 sites that share oxygen atoms with these dopant sites. The sharp 27Al and 71Ga resonances arise from dopants located at a highly symmetric tetrahedral 24d site with four corner-sharing LiO4 neighbors, whereas the broader features originate from highly distorted dopant sites with fewer or no immediate LiO4 neighbors. A correlation between the size of the 27Al/71Ga quadrupolar coupling and the distortion of the doping sites (viz. XO4/XO5/XO6 with X = {Al/Ga}) is established. 17O MAS NMR spectra for these systems provide insights into the oxygen connectivity network: 17O signals originating from the dopant-coordinating oxygens are resolved and used for further characterization of the microenvironments at the dopant and other sites.

Physicochemical and Catalytic Properties of Ni,H/ZSM-5 and Ni,H/ZSM-5–Binder Catalysts Prepared in the Absence and in the Presence of Binder

Physicochemical and catalytic properties of H/ZSM-5 and Ni,H/ZSM-5 along with Ni,H/ZSM-5–Al2O3 (1 : 1) systems were examined. The systems with a binder were prepared by two different methods of mixing zeolite with aluminum hydroxide. The samples were characterized by N2 sorption (at 77 K), X-ray diffraction, 27Al magic-angle spinning (MAS) NMR spectroscopy, temperature-programmed desorption of ammonia and adsorption of pyridine. Preparation of the zeolite catalyst with aluminium hydroxide was made by two methods: (1) mixing of powders and (2) combining appropriate pastes. Regardless of the method used for mixing there was no blocking of zeolite channels by aluminum oxide. The method of mixing zeolite with aluminium hydroxide powders promotes migration of aluminum from aluminum hydroxide/oxide to the zeolite framework. The results of n-hexane conversion showed that with Ni,H/ZSM-5 a slightly lower conversion than with H/ZSM-5 catalyst was observed that can be explained by a reduced yield of cracking products. Ni,H/ZSM-5–Al2O3 (1 : 1) catalytic systems were insignificantly less efficient in n-hexane transformation than alumina free samples but at the same time they were less selective towards hydrocarbons with boiling temperatures higher than this of n-hexane, precursors of carbonaceous deposits.

SYSU-6, A New 2-D Aluminophosphate Zeolite Layer Precursor.

Two-dimensional aluminophosphate is an important precursor of phosphate-based zeolites; a new Sun Yat-sen University No. 6 (SYSU-6) with |Hada|2[Al2(HPO4)(PO4)2] has been synthesized in the hydrothermal synthesis with organic structure-directing agent (OSDA) of N,N,3,5-tetramethyladamantan-1-amine. In this paper, SYSU-6 is characterized by single-crystal/powder X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, infrared and UV Raman spectroscopy, solid-state 27Al, 31P and 13C magic angle spinning (MAS) NMR spectra, and elemental analysis. The single-crystal X-ray diffraction structure indicates that SYSU-6 crystallized in the space group P21/n, with a = 8.4119(3), b = 36.9876(12), c = 12.5674(3), α = 90°, β = 108.6770(10)°, γ = 90°, V = 3704.3(2) Å3, Z = 4, R = 5.12%, for 8515 observed data (I > 2σ(I)). The structure has a new 4,12-ring layer framework topology linked by alternating AlO4 and PO4 tetrahedra. The organic molecules reside between the layers and are hydrogen-bonded to the inorganic framework. The new type of layer provides a greater opportunity to construct zeolite with novel topology.

Pentacoordinated Al3+ -Stabilized Active Pd Structures on Al2 O3 -Coated Palladium Catalysts for Methane Combustion.

Supported Pd catalysts are active in catalyzing the highly exothermic methane combustion reaction but tend to be deactivated owing to local hyperthermal environments. Herein we report an effective approach to stabilize Pd/SiO2 catalysts with porous Al2 O3 overlayers coated by atomic layer deposition (ALD). 27 Al magic angle spinning NMR analysis showed that Al2 O3 overlayers on Pd particles coated by the ALD method are rich in pentacoordinated Al3+ sites capable of strongly interacting with adjacent surface PdOx phases on supported Pd particles. Consequently, Al2 O3 -decorated Pd/SiO2 catalysts exhibit active and stable PdOx and Pd-PdOx structures to efficiently catalyze methane combustion between 200 and 850 °C. These results reveal the unique structural characteristics of Al2 O3 overlayers on metal surfaces coated by the ALD method and provide a practical strategy to explore stable and efficient supported Pd catalysts for methane combustion.

Design Synthesis of ITE Zeolite Using Nickel-Amine Complex as an Efficient Structure-Directing Agent.

Modern methodologies for synthesizing zeolites typically involve the employment of costly organic structure-directing agents. Herein, we report the design synthesis of aluminosilicate zeolite with ITE structure using an inexpensive nickel-amine complex (nickel-pentaethylenexamine) as a novel structure-directing agent. Characterizations including X-ray diffraction, scanning electron microscopy, N2 sorption isotherms, and 27Al magic-angle spinning NMR techniques show that the ITE zeolite has high crystallinity, perfect crystals, large surface area, and abundant aluminum species in the framework. More importantly, catalytic tests on the hydrogenation of CO2 into methane show that the Ni-ITE zeolite exhibits better catalytic performance than aluminosilicate-supported and silica-supported nickel catalysts. Obviously, the use of nickel-amine complex offers an alternative and facile way to synthesize aluminosilicate zeolites.

Structural Investigation of Ye’elimite, Ca4Al6O12SO4, by 27Al MAS and MQMAS NMR at Different Magnetic Fields

Ye’elimite is the principal component in calcium sulfoaluminate cement, which currently attracts significant attention, since it can be produced with lower CO2 emissions compared to conventional portland cement. The crystal structure of ye’elimite is not well-established, and it has been proposed to exhibit cubic, tetragonal, and orthorhombic structures. The present work reports a comprehensive 27Al magic-angle spinning (MAS) and multiple-quantum (MQ) MAS NMR study of ye’elimite, utilizing six magnetic fields from 4.7 to 22.3 T. These spectra are only compatible with the orthorhombic Pcc2 structure of ye’elimite, implying the presence of eight distinct AlO4 sites. The 27Al NMR spectra are convincingly simulated by eight distinct sites, and 27Al quadrupole coupling parameters and isotropic chemical shifts are reported for the first time for ye’elimite. These parameters are a prerequisite for a reliable interpretation and quantification of ye’elimite in 27Al NMR spectra of ye’elimite-based cements. Density functional theory (DFT) calculations are used in the assignment of the specific Al sites in ye’elimite. Structural relaxations by DFT, using two proposed Pcc2 structures as starting points, result virtually in the same set of optimized fractional atomic coordinates, which is proposed as a new refined structure for ye’elimite. The refined structure gives the best agreement between experimental and calculated 27Al quadrupole tensor elements for the eight Al sites. Finally, the 33S MAS NMR spectra for ye’elimite, monosulfate, and anhydrite are reported.

Synthesis and Structural Characterization of a CHA-type AlPO4 Molecular Sieve with Penta-Coordinated Framework Aluminum Atoms.

The structure-directing effects of a series of polymethylimidazolium cations with different numbers of methyl groups as organic structure-directing agents (OSDAs) in the synthesis of aluminophosphate (AlPO4)-based molecular sieves in both fluoride and hydroxide media are investigated. On the one hand, among the OSDAs studied here, the smallest 1,3-dimethylimidazolium and the largest 1,2,3,4,5-pentamethylimidazolium cations were found to direct the synthesis of a new variant of the triclinic chabazite (CHA)-type AlPO4 material, designated AlPO4-34(t)V, and the one-dimensional small-pore silicoaluminophosphate (SAPO) molecular sieve STA-6 in hydroxide media, respectively. On the other hand, the intermediate-sized 1,2,3,4-tetramethylimidazolium cation gave SSZ-51, a two-dimensional large-pore SAPO material, in fluoride media. Synchrotron powder X-ray diffraction and Rietveld analyses reveal that as-made AlPO4-34(t)V contains penta-coordinated framework Al species connected by hydroxyl groups, as well as tetrahedral framework Al, which contrasts with the distortions arising from the two F- or OH- bridges between octahedral Al atoms in all already known AlPO4-34 materials. The presence of Al-OH-Al linkages in this triclinic AlPO4-34 molecular sieve has been further corroborated by thermal analysis, variable-temperature IR,27Al magic-angle spinning NMR, and dispersion-corrected density functional theory calculations.

Solid-State 1H and 27Al NMR Studies of DMSO-Kaolinite Intercalates

AbstractNuclear magnetic resonance (NMR) provides a powerful tool to describe local nuclear environments. In this work, unique structural information on kaolinite and on kaolinite dimethylsulfoxide (DMSO) intercalate were provided by solid-state 1H and 27Al magic-angle spinning (MAS) NMR. The interlayer chemistry of kaolinite (K) was examined by intercalating a select group of highly polar organic molecules or salts into kaolinite as a first step. Once the interlayer space is expanded, the intercalated compounds can be replaced in a second step. Intercalating DMSO into kaolinite to form the DMSO-K intercalate is, thus, a particularly useful first step toward the intercalation of a large variety of molecules, including polymers and ionic liquids. Well developed characterization methods are essential to define the structural modifications of kaolinite, and MAS NMR is a useful complement to other techniques. The use of 1H and 27Al MAS NMR for this purpose has been relatively rare. 1H NMR, nevertheless, can give unique information about kaolinite hydroxyls. Because quadrupolar interactions are sensitive to the local octahedral Al(III) geometry, solid-state 27Al NMR can follow subtle structural modifications in the octahedral sheet. In the present work, the 1H MAS NMR chemical shifts of KGa-1b were unambiguously attributed to the internal surface hydroxyls at 2.7 ppm and to the internal hydroxyls at 1.7 ppm. The 1H MAS NMR chemical shifts of the two methyl groups in DMSO-K are not equivalent and can be attributed to the 2.9 and 4.2 ppm peaks. The 27Al MAS NMR spectra of KGa-1b obtained under different magnetic fields revealed that most of the quadrupolar effects were highly reduced at 21.1 T, whereas the spectra at lower field, 4.7 T, were dominated by quadrupolar effects. The two octahedral Al(III) sites are not equivalent and can be distinguished in the low-field spectral simulation. Increased quadrupolar constants were observed and showed the major perturbations of the local Al symmetry that resulted from DMSO intercalation. Both the 1H and 27Al MAS NMR studies at different magnetic fields afforded important information about the local environments of the kaolinite hydroxyl groups and structural Al(III).

Acid-Mediated Synthesis of Ordered Mesoporous Aluminosilicates: The Challenge and the Promise.

A new intrinsic hydrolysis method was employed, for the first-time, to synthesize well-ordered H-AlSBA-15 with trivalent aluminium exclusively in the tetrahedral framework structure of SBA-15. Unlike other methods, which involve incorporation of aluminium ions in both the framework (Brønsted) and non-framework (Lewis) sites of the silicate matrix, the intrinsic hydrolysis method isomorphously substitutes aluminium ions in the tetrahedral network even at high aluminium content. This unique approach relies mainly on the hydrolysis rates of the inorganic (silicon and aluminium) precursors used for the preparation in such a way that the condensation occurs simultaneously so as to overcome the usually encountered difficulties in stabilizing aluminium ions in the silicate matrix. In this way, we could successfully synthesize high quality Brønsted acidic H-AlSBA-15, hitherto not reported. The synthesized materials were systematically characterized by various analytical, spectroscopic, and imaging techniques, including XRD, Brunauer-Emmett-Teller (BET) surface area measurements, TEM, SEM, 29 Si and 27 Al magic angle spinning NMR spectroscopy, X-ray fluorescence (XRF), and NH3 temperature-programmed desorption (TPD). The characterization results reveal the presence of a highly porous structure (with narrow pores) and tetrahedrally coordinated trivalent aluminium in the silicate matrix with more medium to strong Brønsted acid sites. The resulting high quality catalysts exhibit excellent activity for tert-butylation of phenol with high selectivity towards para-tert-butyl phenol and 2,4-di-tert-butyl phenol.