Akagi's Line Research Articles

Difference in Rotational Alignment of the Tibial Component, as Determined by the Range-of-Motion Technique and Akagi's Line, is Influenced by Tibial Varus Deformity: A Cross-Sectional Study.

Anatomical landmarks and range-of-motion (ROM) techniques are commonly used to rotationally align the tibial component in total knee arthroplasty (TKA). This study investigated; 1) the difference in tibial rotational alignment between the ROM technique and Akagi's line, 2) the influence of preoperative deformity and intraoperative gaps on this difference, and 3) intraoperative tibial rotational kinematics associated with these 2 techniques. Patients who underwent cruciate-substituting (CS) TKA (Evolution, Microport Orthopedics) for knee osteoarthritis were enrolled. Intraoperatively, the rotational alignment of the tibial component was determined with the ROM technique and recorded. The difference from the value determined using Akagi's line was evaluated. Correlations among preoperative coronal deformity, postoperative coronal alignment, and intraoperative gaps between the femur and tibia were evaluated. Differences in knee kinematics (rotational movement of the tibia against the femur) between the 2 techniques were compared. This study included 34 knees from 34 patients. The rotational alignment of the tibial component using the ROM technique was 2.5±6.4° externally rotated in relation to that determined using Akagi's line (p=0.029), which was increased in knees with a smaller preoperative medial proximal tibial angle (r=0.45). Tibial rotational kinematics did not significantly differ between the 2 techniques. The ROM technique and Akagi's line yielded significantly different values for the rotational alignment of the tibial component. Orthopedic surgeons using Evolution (CS) should be reminded that in knees with proximal tibial varus deformity, the ROM technique will result in external rotation of the tibial component in relation to Akagi's line.

Intraoperative reliability of the tibial anteroposterior axis "Akagi's Line" in total knee arthroplasty.

The tibial anatomical anteroposterior (AP) axis "Akagi's line" was originally defined on computed tomography (CT) in total knee arthroplasty (TKA); however, its intraoperative reproducibility remains unknown. This study aimed to evaluate the intraoperative reproducibility of the Akagi's line and its effect on postoperative clinical outcomes. This prospective study included 171 TKAs. The rotational angle of the intraoperative Akagi's line relative to the original Akagi's line (RAA) defined on CT was measured. The RAA was calculated based on the tibial component rotational angles relative to the intraoperative Akagi's line measured using the navigation system and CT. The effects of RAA on postoperative clinical outcomes and rotational alignments of components were also evaluated. The mean absolute RAA (standard deviation) value was 5.5° (3.9°). The range of RAA was 22° internal rotation to 16° external rotation. Intraoperative Akagi's line outliers (RAA > 10°) were observed in 14% of the knees (24 knees). In outlier analysis, the tibial component rotation angle was externally rotated 6.5° (5.6°) in the outlier group and externally rotated 3.7° (4.2°) in the nonoutlier group (≤10°), with a significant difference between the two groups. Additionally, the outlier group (RAA > 10°) showed lower postoperative clinical outcomes. The original Akagi's line defined on CT showed insufficient reproducibility intraoperatively. The poor intraoperative detection of Akagi's line could be the reason for the tibial component rotational error and worse postoperative clinical outcomes. Level IV, case series.

Rotational position of ligament balancer affects medial and lateral soft tissue balance in total knee arthroplasty

PurposeThe purpose of this study was to clarify the effect on medial and lateral soft tissue balance for different rotational positions of the balancer. MethodsA total of 65 patients who were operated using a rotational mobile bearing total knee arthroplasty (TKA) have been evaluated. A new balancer was made so that the insert trial could be rotated on the paddle. We measured the angle of deviation to varus or valgus and the rotational angle of the insert trial at Akagi's line (group 0), at 20° of internal rotation from the Akagi's line (group IR), and at 20° of external rotation from the Akagi's line (group ER). ResultsThe IR group had a significantly medial tightness than the other two groups. The ER group had a significantly lateral tightness than the other two groups. All cases were divided into three groups by the position of the insert (neutral, internal rotation and external rotation) on the balancer with respect to Akagi's line after range of motion (ROM) technique. In extension, a significant negative correlation was found between mean varus/valgus balance and rotation of the insert. ConclusionIn mobile bearing TKA, it is possible to obtain the optimal medial and lateral soft tissue balance if the misalignment is within the possible range of rotation allowed by the design of the insert. Anatomical landmarks should also be referenced when determining tibial rotational alignment using the ROM technique, as it was easily influenced by medial and lateral soft tissue balance.

Is the Akagi Line a Reliable Landmark for Adjusting the Rotational Axis of the Tibial Component in Patients with Patellofemoral Instability?

This study aimed to investigate whether the Akagi line is a reliable anatomic landmark for adjusting the rotational axis of the tibial component in patients with patellofemoral (PF) malalignment. This retrospective case-control study included 86 patients with PF instability and 129 controls. On the superimposed axial CT images, TT-TG, TT-PCL, nTT-TG, nTT-PCL, knee joint rotation, and the angle between the Akagi line and surgical transepicondylar axis (Akagi/sTEA angle) were measured. In addition, a modified Akagi line, drawn 1cm medial to the patellar tendon attachment, was defined, and the angle between the new Akagi line and sTEA (mAkagi/sTEA angle) was also measured and compared between groups. There were 86 patients (47 females, 39 males) in the case group and 129 patients (56 females, 73 males) in the control group with a mean age of 35.7 ± 17.9years and 41.1 ± 18.8years, respectively (p < 0.001). Radiologic variables of PF alignment (TT-TG, TT-PCL, nTT-TG, nTT-PCL, and knee joint rotation) were significantly abnormal in the case group (p < 0.001 for all variables). The Akagi/sTEA angle was significantly higher in the case group, resulting in 89.5% external malrotation of the tibial component (> 10°). However, the tibial component was 96.5% aligned correctly (between 10° external and 3° internal rotation) in the control group. Using the modified Akagi line significantly improved the rotational alignment, and normal tibial rotation increased to 93.3% of the case group. The Akagi/sTEA angle strongly correlated with the knee rotation (rho: 0.735, p: 0.001), TT-TG (rho: 0.715, p: 0.001) and nTT-TG (rho: 0.783, p: 0.001). But the TT-PCL (rho: 0.459, p: 0.001) and nTT-PCL (rho: 0.589, p: 0.001) had a medium correlation. The Akagi line might cause unacceptable external rotation of the tibial component in patients with PF malalignment. The use of the modified Akagi line described in this study may be a solution for the rotational mismatch between femoral and tibial components in TKA. Level III, retrospective case-control study.

Tibial component rotation alters soft tissue balance in a cruciate retaining total knee arthroplasty

Our aim was to understand whether using different landmarks for tibial component rotation influenced articular contact pressures in a balanced total knee arthroplasty (TKA). Twelve patients underwent TKA (Triathlon CR, Stryker Inc., Mahwah, NJ) and contact pressures were assessed using a wireless sensor. Robotic arm assisted TKA using a functional alignment technique was performed, with balanced gaps between medial and lateral compartments. Compartment pressures were measured with the trial tibial component rotated to Akagi's line and to Insall's axis respectively. Rotating the tibial component to Akagi's line resulted in a significantly greater proportion of knees being balanced and lower contact pressures than when the tibial component was rotated to Insall's axis at 10°, 45° and 90° of flexion (p < 0.05). Medial compartment pressures were significantly increased in 10° of flexion, as were lateral compartment pressures in all positions when the tibial component was aligned to Insall's axis (p < 0.05). The mean difference in rotation observed with the two landmarks was 6.9° (range 4.1–9.1°). Rotational alignment of the tibial component using Akagi's line reduced contact pressures, improved balance and reduced the need for soft tissue release when compared with Insall's axis in robotic arm assisted TKA.

Reference Axes for Tibial Component Rotation in Total Knee Arthroplasty: Computed Tomography-Based Study of 1,351 Tibiae.

Many anatomic landmarks have been described for setting tibial component rotation intraoperatively. There is no consensus as to which axis is best for reducing outliers and preventing malrotation. The SOMA (Stryker Orthopaedic Modeling and Analytics) database (Stryker) was used to identify 1,351 computed tomography (CT) scans of the entire tibia. Several reference axes for the tibia (including the Mayo axis, Akagi line, Insall line, anterior condylar axis [ACA], posterior condylar axis [PCA], lateral tibial cortex [LTC], Cobb axis, tibial crest line [TCL], and transmalleolar axis [TMA]) were constructed according to published guidelines. The Berger method served as the reference standard. The Mayo method (involving a line connecting the medial and middle one-thirds of the tibial tubercle and the geometric center of the tibia) and the Insall line (involving a line connecting the posterior cruciate ligament [PCL] insertion and the intersection of the middle and medial one-thirds of the tibial tubercle) both had low variability relative to the Berger method (7.8° ± 1.0° and 5.1° ± 2.2°, respectively) and a low likelihood of internal rotation errors (0.7% and 1.8%, respectively). No clinically significant gender-based differences were found (<0.7° for all). The same was true for ethnicity, with the exception of consistently greater tibial intorsion in Asian versus Caucasian individuals (mean difference in TCL position, +4.5° intorsion for Asian individuals; p < 0.001). This CT-based study of 1,351 tibiae (which we believe to be the largest study of its kind) showed that the Mayo and Insall methods (both of which reference the medial and middle one-thirds of the tibial tubercle) offer an ideal balance of accuracy, low variability, and a reduced likelihood of internal rotation errors. Setting rotation on the basis of distal landmarks (tibial shaft and beyond) may predispose surgeons to substantial malrotation errors, especially given the differences in tibial torsion found between ethnic groups in this study. Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.

Different tibial rotational axes can be applied in combination according to the tibial tuberosity–posterior cruciate ligament distance in total knee arthroplasty

PurposeThe purpose of this study was to investigate whether tibial tuberosity–posterior cruciate ligament (TT-PCL) distance is representative of the true lateralization of tibial tuberosity in isolation and its influence on the accuracy of the Akagi line and medial third of the tibial tuberosity (MTTT).MethodsA total of 135 osteoarthritis patients with varus knees who undergoing computed tomography scans were enrolled to establish three-dimension models of the knees. Tibial width (TW), tibial tuberosity lateralization (TTL), posterior cruciate ligament lateralization (PCLL), knee rotation angle (KRA) and tibial rotational axes were measured and investigated their correlations with TT-PCL distance. Based on the analysis of receiver operating characteristic (ROC) curve, the influence of TT-PCL distance on the distributions of mismatch angles of tibial rotational axes was investigated with a safe zone (-5° to 10°).ResultsTT-PCL distance was in significantly positive correlation with TW (r = 0.493; P < 0.001) and TTL (r = 0.378; P < 0.001) which was different with PCLL (r = 0.147; P = 0.009) and KRA (r = -0.166; P = 0.054). All tibial rotational axes were significantly positively correlated with TT-PCL distance (P < 0.001). The mismatch angles between the vertical line of the surgical epicondylar axis (SEA) and the Akagi line and MTTT were -1.7° ± 5.3° and 7.6° ± 5.6° respectively. In terms of the optimal cut-off value of 19 mm for TT-PCL distance, the Akagi line applied as tibial rotational axis ensures 87.3% of the positions of tibial components within the safe zone when TT-PCL distance > 19 mm, and MTTT ensures 83.3% when TT-PCL distance ≤ 19 mm.ConclusionTT-PCL distances cannot reflect the true lateralization of tibial tuberosity in isolation but can aid in the combination of the Akagi line and MTTT in varus knees. The patients with TT-PCL distance > 19 mm are recommended to reference the Akagi line for tibial rotational alignment. MTTT is recommended to the patients with TT-PCL distance ≤ 19 mm. The study will aid surgeons in deciding which reference may be used by measuring TT-PCL distance using a preoperative CT.

Gender differences affect the location of the patellar tendon attachment site for tibial rotational alignment in total knee arthroplasty

PurposeThis study was carried out to investigate the accuracy of referring different locations of the patellar tendon attachment site and the geometrical center of the osteotomy surface for tibial rotational alignment and observe the influences of gender differences on the results.MethodsComputed tomography scans of 135 osteoarthritis patients (82 females and 53 males) with varus deformity was obtained to reconstruct three-dimensional (3D) models preoperatively. The medial boundary, medial one-sixth, and medial one-third of the patellar tendon attachment site were marked on the tibia. These points were projected on the tibial osteotomy plane and connected to the geometrical center (GC) of the osteotomy plane or the middle of the posterior cruciate ligament (PCL) to construct six tibial rotational axes (Akagi line, MBPT, MSPT1, MSPT2, MTPT1 and MTPT2). The mismatch angle between the vertical line of the SEA projected on the proximal tibial osteotomy surface and six different reference axes was measured. In additional, the effect of gender differences on rotational alignment for tibial component were assessed.ResultsRelative to the SEA, rotational mismatch angles were − 1.8° ± 5.1° (Akagi line), − 2.5° ± 5.3° (MBPT), 2.8° ± 5.3° (MSPT1), 4.5° ± 5.4° (MSPT2), 7.3° ± 5.4° (MTPT1), and 11.6° ± 5.8° (MTPT2) for different tibial rotational axes in all patients. All measurements differed significantly between the male and female. The tibial rotational axes with the least mean absolute deviation for the female or male were Akagi line or MSPT, respectively. There was no significant difference in whether the GC of the osteotomy surface or the midpoint of PCL termination was chosen as the posterior anatomical landmark when the medial boundary or medial one-sixth point of the patellar tendon attachment site was selected as the anterior anatomical landmark.ConclusionWhen referring patellar tendon attachment site as anterior anatomical landmarks for tibial rotational alignment, the influence of gender difference on the accuracy needs to be taken into account. The geometric center of the tibial osteotomy plane can be used as a substitute for the middle of the PCL termination when reference the medial boundary or medial one-sixth of the patellar tendon attachment site.

Accuracy of patellar tendon at the attachment as anatomic landmark for rotational alignment of tibial component

To investigate the accuracy of the modified Akagi line which referenced the patellar tendon at the attachment and the geometrical center point of the tibial osteotomy surface for tibial rotational alignment. Between July 2021 and December 2021, 72 patients who underwent three-dimension (3D) CT for varus osteoarthritis knees were enrolled. Among 72 patients, 18 were male and 54 were female with a mean age of 64.9 years (range, 47-84 years). The preoperative hip-knee-ankle angle ranged from 0° to 26°, with a mean of 9.3°. CT images were imported into Mimics 21.0 medical image control system to establish 3D models of the knees. The prominent point of lateral epicondyle and the medial epicondylar sulcus were identified in femoral 3D models to construct the surgical transepicondylar axis and the vertical line of its projection [anteroposterior (AP) axis]. In tibial 3D models, the patellar tendon at the attachment was used as anatomical landmarks to construct rotational alignment for tibial component, including the line connecting the medial border of the patellar tendon at the attachment (C) and the middle (O) of the posterior cruciate ligament insertion (Akagi line), the line connecting the point C and the geometric center (GC) of the tibial osteotomy plane [medial border axis of the patellar tendon (MBPT)], the line connecting the medial sixth point of the patellar tendon at the attachment and the point GC [medial sixth axis of the patellar tendon (MSPT)], the line connecting the medial third point of the patellar tendon at the attachment and point O [medial third axis of the patellar tendon 1 (MTPT1)], and the line connecting the medial third point of the patellar tendon at the attachment and point GC [medial third axis of the patellar tendon 2 (MTPT2)]. The angles between the five reference axes and the AP axis were measured, and the distribution of the rotational mismatch angles with the AP axis was counted (≤3°, 3°-5°, 5°-10°, and >10°). Relative to the AP axis, the Akagi line and MBPT were internally rotated (1.6±5.9)° and (2.4±6.9)°, respectively, while MSPT, MTPT1, and MTPT2 were externally rotated (5.4±6.6)°, (7.0±5.8)°, and (11.9±6.6)°, respectively. There were significant differences in the rotational mismatch angle and its distribution between reference axes and the AP axis ( F=68.937, P<0.001; χ 2=248.144, P<0.001). The difference between Akagi line and MBPT showed no significant difference ( P=0.067), and the differences between Akagi line and MSPT, MTPT1, MTPT2 were significant ( P<0.012 5). When the position of the posterior cruciate ligament insertion can not be accurately identified on total knee arthroplasty, MBPT can be used as the modified Akagi line in reference to the geometrical center point of the tibial osteotomy surface to construct a reliable rotational alignment of the tibial component.

Trans patellar tendon sagittal tibial cut for lateral unicompartmental knee arthroplasty-location of the split- CT simulation study

BackgroundIn lateral unicompartmental knee arthroplasty (UKA), a sagittal cut is often performed through the patellar tendon (PT). Although the approach is likely widely used, it has not been described in detail, especially regarding the site of the split. This study aimed to clarify where the split should be made. MethodsThis single-center retrospective cohort study included 49 consecutive patients and 51 knees with lateral osteoarthritis. Using preoperative computed tomography, we measured the distance from the medial edge of the PT to the intersection of the PT and the sagittal cutting line, defined as a line parallel to the Akagi's line and passing the tip of the lateral tibial spine. ResultsThe sagittal cut line passed a mean of 45 ± 11% of the patellar tendon width from the PT medial edge. ConclusionsThe tendon split should be made just medial to the center of the PT because it is where the sagittal cut line for lateral UKA passes.

Determining the rotational alignment of the tibial component referring to the tibial tubercle during total knee arthroplasty: the tibial tubercle–trochlear groove can be an aid

BackgroundThere is no consensus on anatomic landmarks or reference axes with which to accurately align rotational position of tibial component. Using the tibial tubercle, commonly referring to the Akagi line and the Insall line, for anatomic reference was widely accepted. However, it is unknown about the predictors that may affect the reliability of using the tibial tubercle for aligning tibial component rotation. The aims of our study were (1) to investigate the reproducibility and accuracy of using the tibial tubercle for aligning tibial component rotation and (2) to determine predictors resulting in discrepancies of the tibial component rotation when referring to the tibial tubercle.MethodA total of 160 patients with osteoarthritis were recruited before total knee arthroplasty. The angle α formed by the tibial anteroposterior (AP) axis and the Akagi line and the angle β formed by the tibial AP axis and the Insall line were measured to quantify the discrepancies of the Akagi line and the Insall line. Independent variables, including the tibial tubercle-to-trochlear groove distance (TT-TG), tibial tubercle to posterior cruciate ligament (TT-PCL), and knee rotation angle (KRA), hip–knee–ankle angle (HKA), medial proximal tibial angle (MPTA), and tibial bowing (TB), were measured. Pearson’s product moment correlation coefficients and multivariable linear regression analysis were calculated to assess relationships between independent variables and the two defined angles.ResultsAll defined measurement were available for 140 patients. The Akagi line rotated internally with 1.03° ± 4.25° in regard to the tibial AP axis. The Insall line rotated externally in regard to the tibial AP axis with 7.93° ± 5.36°. Three variables, including TT-TG, TT-PCL, and KRA, tended to be positively correlated with the angle α and the angle β. In terms of a cutoff of TT-TG = 9 mm, 100% cases and 97% cases for using the Akagi line and Insall line, respectively, were located in the defined safe zone (− 5° to 10°).ConclusionThe tibial tubercle (the Akagi line and Insall line) is found to be a useful and promising anatomic landmark for aligning the tibial component rotation. The TT-TG, with a cutoff value of 9 mm, is helpful to choose the Akagi line or Insall line, alternatively.

A New Reference Axis for Tibial Component Rotation in Total Knee Arthroplasty: A Three-dimensional Computed Tomography Analysis.

The purpose of this study was to introduce a new reference axis for tibial rotation in total knee arthroplasty (TKA) and verify its reliability. A consecutive series of 80 knees that underwent TKA from 2018 to 2020 as well as 80 healthy knees were analyzed using a three-dimensional tibial model. A coordinate system was established based on the standard TKA tibial cut. The line connecting the lateral-tibial eminence and the medial 1/3rd of the tibial tubercle or the medial border of the tibial tubercle was identified as the lateral eminence line (LE line) and the medial lateral eminence line (MLE line), respectively. To evaluate the reliability of the new reference axis, Akagi's line, the medial third of the tibial tubercle (1/3 line) was compared with the LE and MLE lines by measuring the angle between the lines and the Z-axis. In the coronal view, the intersection angle (TPA), which is composed of the line connecting the center of the medial and lateral tibial plateau with the Z-axis, was measured. The mean angle between Akagi's line and the Z-axis in the healthy group and the osteoarthritis (OA) group was 87.57 ± 3.48° and 87.61 ± 3.47°, respectively. The mean angle between the LE line and Z-axis in the healthy and OA groups was 87.15 ± 4.13° and 86.78 ± 3.95°, respectively. A weak correlation was found between the TPA and Akagi's line and the 1/3 line. A moderate correlation was observed between the TPA and LE lines. There were no significant differences between the healthy and OA groups (P > 0.05) in any of the four reference axes. The LE line showed excellent intra- and inter-observer reliability and reproducibility. The novel and easily drawn LE line is a preferable option for tibial component rotational alignment in TKA.

Accuracy and Validity of Sharma's Venn Diagram Method for Assessment of Tibial Component Rotation in Total Knee Arthroplasty.

Malrotation of the tibial component in a total knee replacement leads to anterior knee pain, patella dislocations, extensor mechanism disruptions, knee stiffness and prosthesis loosening. Techniques like free-floating technique, medial 1/3 rd of the tibial tubercle, medial border of the tibial tuberosity, Akagi's line, transcondylar line of tibia, posterior condylar line of tibia, midsulcus of tibial spines, curve on curve technique have been advocated. None of these have been shown to be accurate and reproducible. We developed a novel 'Sharma's Venn Diagram' method to assess the tibial component rotation. Fifty-two consecutive knee replacements were included in a prospective observational study. The average age of the study group was 53.6years (48-76 years) Thirty-one were females and 3 were males. The patients were followed a minimum of one years (max 2 years, average 1.8 years). 'Sharma's Venn diagram Method (C)' was compared to free-floating method (F) and post-op CT scans using Berger protocol (B). Tibial rotation calculated using Sharma's Venn diagram method (C) coincided with the final component placement in 50/52 knees. The free floating method (F) coincided with method (C) in 30/52 knees with an average 4.8° external rotation in 5 knees and an average of 5.2° internal rotation in 17 knees. Bland Altman method was used to compare method (C) with Method (F), The difference was statistically significant p < 0.0001. Sharma's Venn diagram method is reliable, accurate and easily reproducible by any surgeon performing tkr and correlates with postoperative 2D CT-based assessment of tibial component rotation. Prospective observational study.

Different rotational alignment of tibial component should be selected for varied tibial tubercle locations in total knee arthroplasty.

The main purpose of this study was to identify how the accuracy of the tibial rotation reference axes varied in populations with different tibial tubercle locations. We hypothesized that the accuracy of the axes of tibial rotation would be affected by the changes of tibial tubercle locations. Surgical epicondylar axis (SEA), medial third of the patellar tendon (1/3MPT), medial third of the tibial tuberosity (1/3MTT), medial border of the tibial tuberosity (MTT) and Akagi line were drawn. The angle between SEA and horizontal line with the angle between the four tibial rotation axes and the horizontal line was compared by T test. Then, the correlation between TTTG with the angles between the four axes and SEA vertical lines was analyzed. The TTTG was divided into three subgroups (TTTG < 10mm, 10mm ≤ TTTG < 15mm, TTTG ≥ 15mm), then t test was performed for the angles between the vertical lines of the SEA and the four rotation axes of the tibia in each group. Among the four tibial rotation axes, only the difference between MTT and the line perpendicular to SEA had no statistical significance (NS.). The four tibial rotational axes were all positively correlated with TTTG (p < 0.001). When TTTG ≥ 15mm, Akagi line was 2.5° ± 6.9°internally rotated to the line perpendicular to SEA, while the 1/3MPT and MTT was 0.9° ± 5.3°and 1.3° ± 5.9°externally rotated to the line perpendicular to the SEA when TTTG < 10mm and 10mm ≤ TTTG < 15mm, respectively. MTT showed the best consistency with SEA. TT-TG had a significant positive correlation with all four tibial rotational axes. In patients with TTTG < 10mm, 10mm ≤ TTTG < 15mm and TTTG ≥ 15mm, the 1/3MPT, MTT and Akagi line demonstrated good alignment consistency with SEA, respectively.

Reliability of tibial anterior crest as the anatomical reference of rotating alignment for tibial component in total knee arthroplasty

This study aimed to research whether anterior tibial crest is a reliable anatomical reference for rotational alignment of tibial component in TKA. The study included 122 patients who underwent computed tomography angiography (CTA) examination for unilateral lower extremity trauma with normal contralateral lower extremities, including 89 males and 33 females, with an average age of(51.4±16.4) years old(ranged 18 to 81 years old). Picture archiving and communication system (PACS) was used to mark 11 lines including the surgical epicondylar axis (SEA) connecting the most prominent points of the lateral epicondyle and the deepest point of the sulcus on the medial epicondyle of the femur, axis of medial border of patellar tendon (MEPT)connecting the middle of the posterior cruciate ligament (PCL) and medial border of the patellar tendon at the level of a standard tibial cut from 8 mm distal of the lateral tibial joint surface, transverse axis of tibia (TAT) at the level of a standard tibial cut from 8 mm distal of the lateral tibial joint surface, Akagi line connecting the projected middle of the PCL and medial border of the patellar tendon at the tibial attachment, the axis of the medial 1/3 of patellar tendon(M1/3) connecting the projected middle of PCL and the medial 1/3 of the patellar tendon at the patellar tendon attachment level, Insall line connecting the projected middle of the PCL and the medial 1/3 of tibial tubercle, the axis of medial border of tibial tubercle (MBTT) connecting the projected middle of the PCL and medial border of tibial tubercle, as well as the axis of the proximal anterior tibial crest (PATC), axis 1 of the middle anterior tibial crest (MATC1), axis 2 of the middle anterior tibial crest (MATC2) and the axis of the distal anterior tibial crest (DATC) which were marked by connecting the 4 equidistant points on the sharp anterior tibial crest and the projected middle of the PCL. The angles between TAT and SEA as well as the angles between other axes and the perpendicular to SEA were measured. Pairwise differences among the 10 tibial axes were examined using One-Way ANOVA and paired t-test. The angles between the axes of MEPT, Akagi line, M1/3, Insall line, MBTT, PATC, MATC1, MATC2, DATC and the perpendicular to SEA were (-1.6 ±4.5)° , (1.4 ±5.0)° , (10.2±5.1)°, (11.9±5.4)°, (3.6±4.8)°, (12.0±6.9)°, (7.2±8.6)°, (7.1±10.4)°, (6.6±13.5)°, respectively. The angle between TAT and SEA was (4.1±5.3)°. MEPT was external rotation compared to SEA. M1/3, Insall line and PATC were significantly greater than Akagi line, MBTT, TAT (P<0.001). MATC1, MATC2 and DATC were also significantly greater than Akagi line, MBTT axis and TAT (P<0.001). However, MATC1, MATC2 and DATC were also significantly less than M1/3 axis, Insall line and PATC(P<0.01). There were no significant statistical differences between MATC1, MATC2 and DATC(P>0.05). The middle tibial anterior crest can be used as a reference for rotational alignment of tibial component in TKA, and its reliability is better than Insall line, but worse than Akagi line, TAT and MBTT.

Evaluation of tibial rotational axis in total knee arthroplasty using magnetic resonance imaging

Surgeon-dependent factors such as optimal implant alignment of the tibial component are thought to play a significant role in the outcome following primary total knee arthroplasty (TKA). In addition, tibial component malrotation is associated with pain, stiffness, and altered patellofemoral kinematics in TKA. However, measuring tibial component rotation after TKA is difficult. Therefore, the purpose of this study was to find a reliable method for positioning the tibial component in TKA. To investigate the morphology of the tibial plateau, 977 patients' knees (829 females and 148 males) were evaluated using MRI. The relationships between the femoral transepicondylar axis (TEA), Akagi line, posterior tibial margin (PTM), medial third of the tibial tubercle (MTT), and anatomical tibial axis (ATS) were investigated in this study. In addition, gender difference in tibial rotational alignment were evaluated. Relative to the TEA, the MTT and ATS were externally rotated by 0.5° ± 4.4° and 0.5° ± 5.4°, respectively, while Akagi line and PTM were internally rotated by 3.7° ± 4.5° and 9.9° ± 6.1°, respectively. Gender differences were found in MTT, Akagi line and ATS (P < 0.05). Our result showed that the rotational alignment led to notable variance between femoral and tibial components using fixed bone landmarks. The MTT and ATS axes showed the closest perpendicular aspect with projected TEA. And the MTT and Akagi axes showed the reduced variance. In addition, PTM is not a reliable landmark for rotation of the tibial component. Based on the results of this study, surgeons may choose the proper anteroposterior axis of the tibial component in order to reduce rotational mismatch and improve clinical outcomes.

The tibial lateral axis is a novel extraarticular landmark for detection of the tibial anteroposterior axis.

Although the tibial rotation axis is significant in knee arthroplasty, no reliable extraarticular landmark has been proposed. We hypothesized that the tibial lateral axis (TLA), a tangential line of the lateral tibial surface, is perpendicular to the surgical epicondylar axis (SEA) and compared it to other existing landmarks by 3D-CT. Fifty legs in 25 consecutive patients were studied. Using their preoperative CT, the TLAs were identified on slices at 10-50% of the total length of the tibia and the measured differences of angles against the line perpendicular to the SEA (the tibial AP axis) were calculated. The differences between the SEA and the femoral and tibial posterior condylar axis, Akagi's line and the line between the medial intercondylar spine and the medial border of the patellar tendon (sAP line)(intraarticular), the ankle axis, and the transmalleolar axis (extraarticular) were also calculated and compared. The mean values of TLA at 10%, 20%, 30% were virtually parallel to the SEA (0.97° ± 4.84°, 0.02° ± 4.61°, 1.10° ± 4.97°, respectively). They were equivalent to existing intraarticular landmarks and superior to existing extraarticular landmarks, and these levels corresponded to the tip to the lower end of the tibial tubercle (at 10.8% and 17.0% of total tibial length). The proximal TLAs can be an extraarticular bony landmark that indicates the line perpendicular to the SEA. A prospective study is needed to prove the validity and accuracy of the axes clinically.

Tibiofemoral rotation alignment in the normal knee joints among Chinese adults: a CT analysis

BackgroundConsensus on tibial rotation in total knee arthroplasty (TKA) remains controversial. The present study aimed to investigate the closest anatomical reference to surgical epicondylar axis (SEA) among 10 tibial markers in Chinese adults.MethodsThis study included examination of 122 normal lower extremities. Briefly, 10 axes were drawn on the axial sections: transverse axis of tibia (TAT), axis of medial edge of patellar tendon (MEPT), axis of medial 1/3 of patellar tendon attachment (M1/3), Akagi line, Insall line, axis of medial border of tibial tubercle (MBTT), and axis of anterior border of the tibia 1–4 (ATC1–4). The mean angles between TAT and SEA and that between other axes and the line perpendicular to SEA were measured. Pairwise differences among the 10 tibial axes were examined by applying one-way analysis of variance (ANOVA) and paired t-test.ResultsIn all the knees, the mean angles of M1/3, Akagi line, Insall line, MBTT, ATC1, ATC2, ATC3, and ATC4 axes were compared to the line perpendicular to the projected SEA and found to be 10.2 ± 5.1°, 1.4 ± 5.0°, 11.9 ± 5.4°, 3.6 ± 4.8°, 12.0 ± 6.9°, 7.2 ± 8.6°, 7.1 ± 10.4°, and 6.6 ± 13.5° external rotation, respectively, and the MEPT axis was 1.6 ± 4.5° internal rotation. The mean angle for TAT was 4.1 ± 5.3° external rotation. The M1/3 and Insall line were significantly more externally rotated than Akagi line, MEPT, MBTT, TAT, ATC2, ATC3, and ATC4 axes. No significant differences were noted between the TAT axis and the MBTT axis and among the ATC2, ATC3, and ATC4 axes.ConclusionThe Akagi line, MBTT, and TAT showed good consistency with SEA in the axial femorotibial alignment with knee in extension. The middle segment of the anterior tibial crest also demonstrated good alignment consistency with SEA for the axial femorotibial alignment. Hence, these markers can be used as reliable references for rotational alignment of the tibial component in TKA.

Extensor hallucis longus tendon is a new distal landmark for coronal tibial component alignment in total knee arthroplasty: A study of magnetic resonance imaging.

In total knee arthroplasty (TKA), various landmarks are generally used to ensure correct osteotomy. In this study, we examined whether the tibialis anterior tendon (TAT) or the extensor hallucis longus tendon (EHLT) could be used as a landmark of the center of the ankle joint in patients with knee osteoarthrosis (OA), using magnetic resonance imaging (MRI). The subjects were 61 patients with OA in 79 knees (males: 8 with 9 knees and females: 53 with 70 knees). With the ankle joint secured in the intermediate position, MRI from the knee joint to the ankle joint was performed in the same foot position. We prepared individual lines connecting the center of the ankle joint with the TAT or EHLT to measure the angle difference (ΔA) from Akagi's line in the knee joint. We analyzed whether the ΔA might be affected by deformity of the knee joint or foot region, and tibial torsion. At the ankle joint level, the ΔA of EHLT was the smallest, with an average of 1.6 ± 3.4°. The ΔA for the femorotibial angle, hallux valgus angle, and varus-valgus angle showed no correlations with deformity of the knee joint and foot region, or tibial torsion. MRI findings showed that EHLT would be useful as a landmark of the ankle joint center in extramedullary tibial osteotomy in TKA for medial knee OA. It was also clarified that the landmark would not be affected by severe deformity of the knee joint, deformity of the foot region, or external torsion of the tibia.

Methods of intra- and post-operative determination of the position of the tibial component during total knee replacement.

To identify the most reliable anatomical landmarks and imaging techniques for assessing the rotation of the tibial component in total knee arthroplasty (TKA). An extensive literature review (from January 2016 to March 2019) was performed. We included studies about primary TKA with details concerning the anatomical landmarks used for implanting the tibial component and also imaging studies assessing tibial component rotation. The final selection comprises only thirty-five articles consistent with the inclusion criteria. Extra-articular landmarks are not always reliable (even though the tibial tubercle is one of the most popular extra-articular landmarks used to assess the rotation of the tibial component), mainly because they vary and can lead to malrotation of the tibial component. Akagi's line (an intra-articular landmark) is considered to be the most reliable and easy to find during surgery and likewise is not affected by articular deformities. The anterior tibial cortex (intra-articular landmark) also proved to be accurate and reliable with the main advantage being that is palpable after tibial resection. Radiography provides a good and inexpensive option for imaging, but it is insufficient. Magnetic resonance imaging (MRI) is used in some cases but not routinely for assessing TKA components or their orientation. Computed tomography (CT), used together with a well-defined protocol (Berger's method being the preferred choice), remains the "gold standard" for evaluating the rotation of the tibial component after TKA. Currently, the most accurate and reliable anatomical landmarks are represented by Akagi's line and the anterior cortex of the tibia. Post-operatively, through CT and well-established protocols, the rotation of the tibial component can be accurately determined.