Aggradational Stacking Pattern Research Articles

Increased sediment connectivity between deltas and deep-water fans in closed lake basins: A case study from Bozhong Sag, Bohai Bay Basin, China

The connection between deltaic clinothem growth and the formation of down-dip deep-water systems on continental margins has been extensively discussed as a crucial component of sequence stratigraphic theory. However, in lacustrine settings, the growth of deltaic clinothems and outlying deep-water fans remains comparatively poorly understood. In the southwestern Bozhong Sag, Bohai Bay Basin, China, both lacustrine deltas and outlying sub-lacustrine fans were developed during the Oligocene, providing an opportunity to investigate the connection between lacustrine deltaic clinothem growth and the formation of outlying sub-lacustrine fans in deep-lacustrine systems. We employ 3D seismic data, well data, core data, and sandstone grainsize data to analyze the stacking patterns and internal architectures of these two sedimentary systems in the lower and upper successions of our study interval, SQEd2L. In addition, elemental geochemical parameters were utilized to reveal the paleoclimatic signature of the different stratigraphic successions. Our results suggest that there are two main types of deltaic clinothem stacking patterns in the lower and upper successions of SQEd2L, respectively: (1) in the lower succession, progradational to aggradational stacking patterns have a flat to steeply rising rollover trajectory, and (2) in the upper succession, aggradational to progradational and degradational stacking patterns have a slightly rising to flat and slightly falling trajectory. Meanwhile, the sub-lacustrine fans with straight channels and thick lobe complexes are coupled with progradational and aggradational (PA) deltaic clinothems in the lower succession. In the upper succession, small-scale sub-lacustrine fans with sinuous channels and thin lobe complexes are coupled with aggradational to progradational and degradational (APD) deltaic clinothems. The sediment connectivity between lacustrine deltas and sub-lacustrine fans stands in stark contrast to their counterparts in marine basins (such as marine APD clinothems coupled with large-scale deep-water fans, while marine PA clinothems rarely produce deep-water fans). In addition, two contrasting paleoclimatic stages have been identified in SQEd2L, namely the earlier humid stage in the lower succession and the later semiarid climatic stage in the upper succession. A comprehensive analysis of the differences between lacustrine and marine basins indicates that climatic variations play a pivotal role in deep-lacustrine deposition. Consequently, a climate-cycle-driven, sediment-supply-dominated sedimentary model of delta-to-fan sediment connectivity is proposed that incorporates the efficiency of terrigenous sediment dispersal into deep-lacustrine floors and the architecture of sub-lacustrine fans. The findings of this study further refine the implementation of the sequence stratigraphy paradigm and enhance the understanding of delta-to-fan sediment connectivity in deep-lacustrine depositional systems.

Decoupling external forcings during the development of Miocene fluvial stratigraphy of the North Patagonian Foreland

AbstractThe Patagonian Andean foreland system includes several intermountain basins filled with a Miocene non‐marine record deposited under syn‐tectonic conditions related to the Andean uplift and a regional climate change triggered by a rain shadow effect. Many of those basins, such as the Collón Cura basin in Neuquén Province, Argentina, present a well‐preserved fluvial record (i.e. the Limay Chico Member of the Caleufú Formation). Sedimentological and palaeomagnetic studies have allowed the interpretation of coeval transverse distributary fan and axial mixed‐load fluvial systems deposited between 10.6 ± 0.2 and 12.8 Ma. The basin infill arrangement shows that, while the axial mixed‐load fluvial system exhibits an aggradational stacking pattern, the transverse distributary fluvial fan system denotes three different orders of stratigraphic patterns: (i) large‐scale progradation of the transverse fluvial fan system over a time scale of 106 year; (ii) intermediate‐scale progradational–retrogradational transverse intra‐basinal fluvial fan episodes over a time scale of 105 year; and (iii) small‐scale transverse lobe progradation over a time scale of 105–104 year. These patterns were interpreted as transverse sediment flux variations triggered by variable external forcings. To decouple those forcings, we estimated the Collón Cura basin equilibrium time at 3–5 × 105 year and compared it with the time scale over which different external forcings varied in the Patagonian Andean and foreland regions during Miocene times. Large‐scale progradation is linked to an increase in sediment flux triggered by a long‐term tectonically driven exhumation forcing associated with the Miocene Patagonian Andean contractional phase. Intermediate‐scale progradational–retrogradational episodes are linked to variations in sediment flux due to a mid‐term tectonic forcing associated with the western fault system activity. The small‐scale fan lobe progradation is related to increases in sediment flux triggered by indistinguishable short‐term autogenic processes and/or high‐frequency tectonic and climatic forcings. This contribution shows the applicability and limitations of the basin equilibrium time concept to decouple external forcings from the geological record, considering their magnitude, nature and time scale, as well as the basin characteristics.

Controls on sedimentation in a deep‐water foredeep: Central Pindos foreland basin, western Greece

AbstractThis study provides a sedimentological, stratigraphic and palaeocurrent investigation of Upper Eocene to Lower Oligocene deep‐sea fan deposits found in the central part of the Pindos foreland basin in western Greece. According to facies analysis, the examined succession at Amfilochia area has 13 sedimentary facies and 10 facies and sub‐facies associations. Depositional elements include abyssal plain pelagics, outer fan, inner fan, and slope deposits. Outer fan sediments are classified as lobe‐axis, lobe‐off‐axis, lobe‐fringe, and distant lobe‐fringe deposits, while inner fan sediments are classified as channel‐fill, crevasse‐splay, internal and external levee deposits. The stratigraphic study shows an upward shift from abyssal plain pelagics to outer, inner fan, and finally slope deposits, implying submarine fan system progradation and progressive infilling of a deep‐water sediment depocentre. The sediments were deposited in the foredeep of the Pindos foreland system and correspond to the system's underfilled stage, when sedimentation was unable to exceed the accommodation provided by lithospheric flexure. They point to deposition near the onset of the Pindos orogen, after the closure of the Pindos basin because of the collision of the Apulian with the Pelagonian microplate during the Cretaceous‐Palaeogene period. Palaeocurrent data from sole marks show bipolar directions associated with two distinct spreading sub‐marine fan deposits. As a result, the study region was split into Upper (major SE‐direction flow) and Lower (major NW‐direction flow) parts, indicating that axial flows were predominant during sediment deposition. However, as the deposition of the elements continued, the progradation of both systems constrained the space accommodation because of the increased basin sediment supply and forced an increase in the degree of basin confinement that changed the compensational to aggradational stacking pattern. The goals of this research are to develop an updated facies model for these deep‐sea fans as well as a robust correlation framework for the various stratigraphic units in the central Pindos foreland basin. This research also connects the stratigraphic development of deep‐sea fan deposits to the evolutionary phases of the Pindos foreland system, providing fresh insights into the palaeogeographic circumstances in the Pindos foreland basin.

Appraisal of tectonically-influenced lowstand prograding clinoform sedimentary fairways of Early-Cretaceous Sember deltaic sequences, Pakistan using dynamical reservoir simulations: Implications for natural gas exploration

The Early Cretaceous reservoir system of the Indus basin has a suite of stratigraphic-based trapped petroleum plays such as the fluvial-dominated channelized systems, shallow marine incised valley systems, and lowstand prograding clinoforms. However, the seismically-imaged Lowstand prograding clinoform plays (LCP) are hot topics in the stratigraphic-based hydrocarbon traps-bearing traps fairways. These LCPs remain established throughout an extensively falling sea level with succeeding growth, which fills these LCPs with gas-saturated reservoirs. The LCP remains mud-dominated, which has created ambiguous expressions in full-spectrum seismic. Hence, they in turn complicate the prediction of the stacking patterns of the depositional parasequences, the source of sedimentary influx, the angle of stratigraphic traps, and their controls on the vertical/lateral migration of hydrocarbon-bearing fluids. The bandlimited seismic amplitude lacks the tuning frequency, which is one of the key parameters in the seismic sedimentological analysis given the above-mentioned constraints. This study connects the broadband spectral analysis with the bandlimited seismic amplitude-based attributes to quantify the LCP using wavelet transform-based impedance-decomposed porosity-gas-saturation of velocity and density simulations (PGVDS). The seismic amplitude and 23-Hz CWT attribute have allowed the detection of vertical thickness, lateral distribution, and angle of coarse-grained and fractured sigmoidal LCP facies of 22 m, 6 km, 7°, and 26 m, 12 km, 5°. The PGVDS have predicted the thickness, density, and velocity for porous gas-saturated LCP as 31–34 m, 2.1–2.15 g/c. c, 80–85%, 29–32%, 2139–2304 m/s, and non-porous water-saturated LCP as 18–28 m, 2.2–2.39 g/c. c., 60–75%, 17–25%, 2863–3108 m/s. The PGVDS have also imaged the highly fractured and laterally continuous fluvial-dominated onlapping channel-filled reserves that served as a source of generating a high impact of sedimentary influx within aggradational stacking patterns for gas-saturated (80–85%) sedimentary facies of LCP at an angle of zero degrees and porosity range of >30%. The lateral changes in the densely fractured network validate the facies-controlled migration of hydrocarbon-bearing reserves within the LCP, which implicates the development of regionally developed stratigraphic-based trapping plays throughout the basins of Pakistan. This study has categorically broadened the impact of connecting the spectral attributes of inverted reservoir simulations in inferring the geometry, extent, thickness, and distribution of hydrocarbons in prograding clinothems inside the Indus Basin. Hence, this research can serve as an analogue for the exploration of worldwide LCP with similar geological conditions.

The Late Jurassic–Early Cretaceous lacustrine facies and ichnofossils of the Parnaíba Basin, Brazil: A record of bioactivity in response to post-CAMP thermal subsidence in West Gondwana

The lateral and vertical distribution of sedimentary facies and ichnofacies in lacustrine systems records sensitive climatic variations and rates of subsidence. The Upper Jurassic–Lower Cretaceous lacustrine system of the Pastos Bons Formation in the Parnaíba Basin, northeastern Brazil, is an excellent opportunity to evaluate the depositional history of the post-CAMP thermal subsidence. This subsidence event succeeded the voluminous emplacement of mafic magma linked to the Central Atlantic magmatic province (CAMP), ∼201 Ma, forming a large subsiding area in West Gondwana. In this sense, this paper developed outcrop-based facies and ichnofacies analysis, allowing the interpretation of two depositional phases and four facies associations (FAs): 1) The lower depositional phase comprises lacustrine deposits showing an aggradational stacking pattern. FA1 - central lake records fibrous gypsum interbedded with fossiliferous shale beds, forming shallowing-upward cycles. 2) The upper depositional phase reveals a fluvio-lacustrine succession, forming a progradational stacking pattern. Central lake (FA1) comprises laminated mudstone and sandstone beds hosting a suite representative of Mermia ichnofacies, forming coarsening-upward cycles. Lakeshore (FA2) comprising mudstone beds, limestone lenses, and sandstone beds hosting a suite representative of Scoyenia ichnofacies, forming shallowing-upward cycles; and conglomerate lenses overlaid by sandstone beds hosting a suite representative of Skolithos ichnofacies, forming fining-upward cycles. A braided fluvial system (FA3) comprises conglomerate and sandstone beds, forming fining-upward cycles. Delta front (FA4) comprises mudstone lenses and sandstone beds hosting a suite representative of Skolithos ichnofacies, organized in coarsening-upward cycles. The fluvial discharge and wave activity oxygenated the water lake in the progradational phase, creating chemical and biological conditions that allowed the establishment of the epifaunal and infaunal benthic communities, represented by the well-preserved ichnological record. The decrease of the post-CAMP thermal subsidence rates (accommodation potential) related with the increase of the wet periods to the top of the succession (sedimentary supply) indicate a depositional evolution from underfilled to overfilled lake basin, during Upper Jurassic–Lower Cretaceous, in West Gondwana.

Reconstruction of the gross depositional environment evolution in the northern Malay Basin, Malaysia-Thailand joint development area (MTJDA)

This paper provides new insight on the complex interactions between regional tectonic evolution, differential subsidence across the basin, and variation in sediment supply based on a reconstruction of the gross depositional environment in the northern part of Malay Basin. In addition, the variation in sedimentary facies, established from an integrated analysis based on seismic interpretation, well-log analysis, and core evaluation, are used to establish the gross depositional environment for key surfaces within the Oligocene to Miocene succession.The basin fill comprises Oligocene syn-rift and Miocene post-rift successions. The syn-rift successions are Syn-Rift Unconformity (SRU)-Base of Syn-Rift (BSR), and Base Chattian Unconformity (BCU)-Syn-Rift Unconformity (SRU) sequences. Whereas, the post-rift successions represent by Intra-Aquitanian MFS (IAM)-Base Chattian Unconformity (BCU), Intra-Burdigalian MFS (IBM)-Intra-Aquitanian MFS (IAM), Miocene Transgressive-Regressive (MTR)-Intra-Burdigalian MFS (IBM), Intra-Serravalian MFS (ISM)-Miocene Transgressive-Regressive (MTR), and Intra-Tortonian (ITM)-Intra-Serravalian MFS (ISM) sequences.The Oligocene-early Miocene syn-rift succession in the study area is characterized by aggradational stacking patterns, with an indication of retrogradation in individual sand packages for SRU-BSR, and BCU-SRU intervals, whereas an overall aggradational stacking pattern can be observed within the IAM-BCU sequence. The depositional environment of the syn-rift succession is mainly deltaic, fluvial, alluvial fan, shallow and deep lacustrine at the basin center.The early-middle Miocene post-rift succession is characterized by mostly aggradational and fining upwards stacking within the IBM-IAM sequence. This gradually changed to a retrogradational pattern in the MTR-ISM sequence. Depositional environments for this succession consist of an alternation between fluvio-marine and sub-tidal to marine sedimentation. Depositional environments for the overlying late Miocene Intra-Tortonian to Intra-Serravalian (ITM-ISM) was estuarine or tidally-influenced environments comprising fluvial channel, tidal or distributary channel, tidal sand flat, and tidal flat deposition. This interval mainly consists of coarsening upward units that gradually changed to a stacked higher-order fining upwards package. The deeper stratigraphic units are generally more continental (non-marine) in character, but fluvio-tidally influenced marine environments became more dominant in the shallower sequences.

Evolution of an aggradational wave-dominated delta: Sediment balance and animal-substrate dynamics (Upper Cretaceous La Anita Formation, Southern Patagonia)

Aggradational deltaic successions are uncommon in the stratigraphic record since deltas are progradational by nature. However, deltaic coastlines fed by multiple small distributaries rather than by a well-defined trunk fluvial distributary system might result in aggradational successions if the sediment is effectively redistributed from river mouths by active basinal processes (e.g., tides, fairweather waves, and/or storm waves). The wave-dominated deltaic succession in the lower part of the La Anita Formation accumulated during the foreland stage of the Austral-Magallanes Basin (Argentina). Through a sedimentological and ichnological study of the interval, we evaluate and discuss the potential controls on the evolution of aggradational wave-dominated deltaic successions.The studied stratigraphic interval is up to 150 m thick and includes facies deposited in wave-dominated prodelta, wave-dominated distal delta-front, wave-influenced mouth bar, terminal channel, and distributary channel settings. These facies associations stack vertically, forming clear thick aggradational sets. Fairweather wave processes largely dominate the delta-front and prodelta deposits, although discrete beds point to the periodic importance of linked storm-wave and river-flood processes. Owing to the alternation of beds generated during fairweather shoaling waves with those of coupled storm-wave and river-flood cycles, it is proposed that the overall aggradational stacking pattern of the delta is the response to the sediment balance. Clastic material supplied by the distributary channels of the delta was easily transported alongshore during fairweather conditions by longshore currents and basinward via storm-generated waves, and/or hyperpycnal currents and hypopycnal plumes generated by river floods.The alternation of these depositional processes strongly affected the benthic faunal communities, which is well expressed by the resulting ichnological suites. Storm-wave and river-flood events led to the widespread defaunation of tracemaking organisms, leading to generation of unburrowed beds. Between these events, short-lived colonization windows appeared locally, allowing sparse, facies-crossing dwelling and detritus-feeding burrows to be constructed by the recovering benthic communities. By contrast, during prolonged periods of fairweather shoaling, river-induced physico-chemical stresses were greatly reduced, and the resulting beds display elevated bioturbation intensities with greater numbers of burrows that record a wide range of behaviors.

First Evidence of Contourite Drifts in the North-Western Sicilian Active Continental Margin (Southern Tyrrhenian Sea)

We present the results of an integrated geomorphological and seismo-stratigraphic study based on high resolution marine data acquired in the north-western Sicilian continental margin. We document for the first time five contourite drifts (marked as EM1a, EM2b, EM2, EM3a, and EM3b), located in the continental slope at depths between ca. 400 and 1500 m. EM1a,b have been interpreted as elongated mounded drifts. EM1a,b are ca. 3 km long, 1.3 km wide, and have a maximum thickness of 36 m in their center that thins northwards, while EM1b is smaller with a thickness up to 24 m. They are internally characterized by mounded seismic packages dominated by continuous and parallel reflectors. EM2 is located in the upper slope at a depth of ca. 1470 m, and it is ca. 9.3 km long, more than 3.9 km wide, and has a maximum thickness of ca. 65 m. It consists of an internal aggradational stacking pattern with elongated mounded packages of continuous, moderate to high amplitude seismic reflectors. EM2 is internally composed by a mix of contourite deposits (Holocene) interbedded with turbiditic and/or mass flow deposits. EM1a,b and EM2 are deposited at the top of an erosional truncation aged at 11.5 ka, so they mostly formed during the Holocene. EM3a,b are ca. 16 km long, more than 6.7 km wide, and have a thickness up to 350 m. Both EM2 and EM3a,b have been interpreted as sheeted drift due to their morphology and seismic features. The spatial distribution of the contourite drifts suggests that the drifts are likely generated by the interaction of the LIW, and deep Tyrrhenian water (TDW) on the seafloor, playing an important role in the shaping this continental margin since the late Pleistocene-Holocene. The results may help to understand the deep oceanic processes affecting the north-western Sicilian continental margin.

Lacustrine carbonate lithofacies characterization, paleontological content and depositional processes in the Mayrán Basin System

Lithofacies analyses were undertaken on a suite of well-exposed carbonate deposits from the (Pliocene) Mayrán Formation, in the Mayrán Basin system, northeast Mexico to investigate the controls on carbonate lithofacies variability in a series of linked lacustrine subbasins, with a common hydrology yet very different inputs. The lacustrine carbonates contain variable proportions of production-derived components, with subordinate proportions of detrital and early diagenetic components. The lithofacies contain, inorganic and organic calcite (average 91% CaCO3), and organic matter (10.5%–13.8% average 12.6% TOC), together with minor detrital minerals. Nine sub-facies were identified: ostracod mudstone-wackestone, clotted boundstones, gastropod wackestone-packstones, oncoid wackestone-packstones, charophyte wackestone-packstones, crystalline carbonate mudstone, stromatolites, crystalline carbonate, marlstone, and associated evaporite minerals. Isotopic composition of specific components such as micritic laminations in stromatolites (δ13Ccalcite −6.3‰ and δ18Ocalcite −8.0‰), and micrititic matrix from samples in all the subbasins (δ13Ccalcite −5.7‰ and δ18Ocalcite −7.8‰), indicate that overall calcite deposition occurred in freshwater lakes. Non luminescent (e.g. charophytes) to orange dull luminescencent micrite strongly suggest in situ carbonate production. Together these processes contributed to the local production of lime mud. Additionally, microtextural evidence of scour surfaces however, indicates that occasionally the sediment was reworked and transported laterally and basinward. Fossil content and diversity composed by Limnaeidae, Physidae, and Planorbidae types, together with phosphatised bone fragments, micro-oncoids, stromatolites, microbial morphotypes, charophytes, macrophyte phytoherms, and microcodium structres, are good references for lithofacies characterization and indicators of specific paleoenvironmental conditions. Intense to moderate bioturbation (BI 1 to 4), indicates that deposition took place under predominantly oxic conditions. Significant organic matter was preserved in these lacustrine rocks, likely controlled by moderate rates of carbonate mud production. The lacustrine lithofacies were deposited in proximal and distal lacustrine settings, making possible to recognize basin scale variability. Strata staking patterns are organized into shallowing upwards cycles (0.3–2.5 m thick), which are capped either by evaporites or beds with a pedogenic overprint. Their stacking patterns reflect lake level variations which can be recognized in all the subbasins. The lithofacies architecture within each subbasin forms parasequences that overall exhibit aggradational geometries. The lithofacies and their large scale geometries also indicate deposition occurred in a series of relatively shallow (<10 m), lake systems with ramp-like margins. The aggradational stacking patterns of the carbonates and the presence of subordinate evaporites suggest that basin hydrology (water supply and precipitation/evaporation ratios) had an important influence on facies architecture and cyclicity. The Mayrán Formation lacustrine lithofacies deposited under overfilled to balance-filled lake conditions; although balance-filled conditions with an open hydrology were more likely. Overall, facies variability in the lacustrine carbonate lithofacies was controlled by basin inherited geomorphology, accommodation, and basin hydrology, which ultimately controlled clastic trapping, solute inputs, water chemistry, primary production, and lake level changes. We interpret that all these controls were largely driven by climate.

Architecture and controls of thick, intensely bioturbated, storm-influenced shallow-marine successions: An example from the Jurassic Neuquén Basin (Argentina)

Thick (>100 m-thick), highly bioturbated storm-influenced shallow-marine deposits are not frequent in the stratigraphic record, but they tend to be common in aggradational to retrogradational successions. Individual storm-event beds have typically low preservation potential in these successions, yet depositional settings are characterized on the basis of storms processes. Here we present a sedimentological study of a thick, bioturbated exhumed succession deposited during the early post-rift stage of the Neuquén Basin (Argentina) and compare its stratigraphic record with examples worldwide, in order to discuss the potential factors controlling the total overprint of storm-event beds during several million years. The Bardas Blancas Formation being 170–220 m thick in the study area is dominated by muddy sandstones and sandy mudstones, and it also includes subordinate proportions of clean sandstones and pure mudstones, collectively representing different environments of a storm-influenced shoreface-offshore system. The offshore transition and proximal offshore strata invariably comprise intensely bioturbated deposits, with only a few preserved HCS-sandstone beds. The unit shows for most of its thickness a long-term aggradational pattern spanning 7–10 Myr and is associated with low riverine influence.By combining the observations and interpretations of the Bardas Blancas Formation with other subsurface and exhumed intensely bioturbated, shallow-marine successions, we dispute the general assumption that these are associated with low frequency or low magnitude of storms. Alternatively, we argue that the long-lived efficiency of benthic fauna on overprinting most if not all the storm-event beds that reached the offshore-transition sector, results from the combination of several factors: deposition in relatively confined marine depocentres, persistent low riverine influence, and long-term aggradational stacking pattern. As these conditions can develop in a variety of basin styles, such as rift, early post-rift, and foreland settings, the recognition of thick, bioturbated successions as the ones discussed here can be used to infer more realistic constrains for depositional models and better predict facies distribution in such storm-influenced systems.

Constraining stratal architecture and pressure barriers in the subsalt Karachaganak Carboniferous carbonate platforms using forward stratigraphic modelling

Predicting reservoir quality and pressure barriers is a challenging task in carbonate systems. In this paper, we present new model results from the Lower Carboniferous Serpukhovian carbonates in the Karachaganak Field (Northern Kazakhstan), which is characterized by complex facies architectures and reservoir compartmentalization. The Serpukhovian sequence at Karachaganak is poorly imaged by seismic due to the presence of thick Permian salt canopies. The carbonate sequence comprises two carbonate build-ups: a larger Main build-up (MBU) in the eastern portion of the field, and a smaller isolated Western build-up (WBU). We used diffusion-based DionisosFlow forward stratigraphic modeling (FSM) coupled with a CougarFlow sensitivity analysis workflow to (1) review sub-salt seismic horizon picks based on process-modeling constraints, (2) understand the regional controls on the stratigraphic stacking patterns, (3) understand the distribution of reservoir facies, including potential lateral pressure barriers, and (4) constrain the impact and uncertainties of our choice of boundary conditions in the model. Results point out the need for revisions of existing reservoir-scale static models as FSM simulations indicate that the current seismic reflector pick for the base of the Serpukhovian Stage below the WBU is incompatible with the seismic geometries and facies distribution for this system. To reconcile modelling results with existing seismic geometries, the base of the Serpukhovian stage is expected to be about 180 m higher in the stratigraphy. This suggested revision is also supported by the drilling of a recent well that penetrated the top of the Permian 200 m higher in the stratigraphy on the WBU than anticipated. Modeling results also show that fast regional subsidence rates were the primary control for the Early Serpukhovian aggradational stacking pattern, but that slowing subsidence rate during the Late Serpukhovian due to the Uralian orogeny resulted in a switch to progradational sequence patterns. The forward stratigraphic model additionally demonstrates the major role of wind direction and short-term eustatic changes on the presence and distribution of reefs and breccia reservoir facies. Models show that the clinoforms’ angle of repose varies between the leeward and windward sides of the build-up, which leads to the deposition of mud draping on the leeward side that acted as fluid barriers. The presence and distribution of the reservoir and mud facies in the model can explain the observed reservoir compartmentalization at Karachaganak. Finally, our forward stratigraphic modeling workflow coupled with uncertainty analysis provides new quantitative constraints to understand the impact of diffusion coefficients and sediment production rates on the vertical and lateral reservoir heterogeneities and associated lateral pressure-barriers.

Alluvial fan to shallow marine sedimentation record in the ~3.0 Ga Keonjhar Quartzite, Singhbhum Craton, India: An example of Phanerozoic style passive margin sedimentation from the Mesoarchean

The arenite-dominant Mesoarchean Keonjhar Quartzite (>700 m) succession unconformably overlies the granitoid-greenstone core of the Singhbhum craton in the north and west of the Keonjhar town in eastern India. The Keonjhar Quartzite is characterized by eleven lithofacies. The lower part of the succession represents proximal subaerial fan association dominated by cohesive and cohesionless mass-flow conglomerates deposited in a falling stage to lowstand systems tracts (FSST-LST). The channelized conglomerates are likely to be incised valley fills (IVF) from the FSST. The differentiated mass-flow deposits interbedded with tractional deposits such as trough cross-stratified sandstone with ubiquitous evidence of wave-reworking represent subaqueous delta front setting. The upper 3/4th of the succession is dominated by mature wavy bedded arenites and is arranged in aggradational stacking pattern representing TST to early stage of HST of a tectonically driven sea level rise cycle. The Keonjhar Quartzite is a rare example of well preserved record of stable siliclastic shelf development during the Mesoarchean time. The arenite-dominated Keonjhar Quartzite is comparable to only a few well studied examples of such Mesoarchean stable siliciclastic shelf sedimentation, for example, the arenite-dominated units of the Mozaan Group of the Pongola Supergroup and its correlatable Westrand and Centralrand Groups of the Witwatersrand Supergroup in the Kaapvaal craton. The presence of thick mature arenite and wave-tide reworking implies existence of Mesoarchean stable shelf depositional setting similar to the modern day passive continental margins at least in the Singhbhum and in the Kaapvaal cratons.

Quantifying faulting and base level controls on syn‐rift sedimentation using stratigraphic architectures of coeval, adjacent Early‐Middle Pleistocene fan deltas in Lake Corinth, Greece

AbstractQuantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: &gt;450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: &gt;1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.

Facies architecture and depositional evolution of Palaeocene–Eocene, Subathu Formation, Garhwal Himalaya, Uttarakhand, India

The Late Palaeocene–Middle Eocene marine sedimentary sequence of the Himalayan foreland basin, represented by the rocks of Subathu Formation, is enriched with the presence of foraminifera, bryozoa, corals, gastropods, bivalves and so on within both carbonate and clastic dominant lithologies. The carbonate and the shale consist mainly of larger benthic foraminifera (LBF) and the assemblage is composed of Nummulites and Assilina along with the other skeletal and non-skeletal components. The presence of a palaeosol at the base of Subathu indicates a gap in sedimentation. The lithological and biotic assemblages along with the bed form, bed geometry and primary sedimentary features helped us to establish four facies associations, A, B, C and D, and have been corroborated with the shoreline migration (transgression/regression) history. The facies association-A, representing the basal horizons of Subathu Formation, indicates the onset of transgression and deposition in lagoonal condition with carbonaceous shale and oolitic ironstone, followed by the facies association-B and -C deposited in shallow marine shoreface. The uppermost unit, i.e., the medium- to coarse-grained sandstone (facies association-D) of Subathu Formation, represents a fall in relative sea level (progradational stacking pattern), whereas the underlying contact between the facies association-B and -C is represented by an aggradational stacking pattern between the siltstone and the shale, but certainly without exposing the shelf. Petrographic studies based on characteristic features such as framework constituent, the percentage of matrix and grains, nature of cementing material, textural features and fossil content help to deduce a distinct change in depositional setting from an open marine (shelf) to shoal, a lagoon that gradually grades to foreshore/beach environment. The study reveals that the basin has gone through a transgressive (facies association-A and -B), regressive (facies association-C) as well as distinct forced regressive (facies association-D) phase of shoreline migration history.

Shallow-marine depositional sequences in a transgressive mixed siliciclastic-carbonate system: The Early Jurassic Marrat Formation from central Saudi Arabia

A high-resolution sequence-stratigraphic framework is proposed for the Marrat Formation (Early to Middle Toarcian of Saudi Arabia) by presenting new outcrop and shallow core sedimentological data located along a 280 km long N-S transect south of Riyadh and westward subsurface correlations based on gamma-ray wireline logs (200 km Ar Riyadh to Khurais Field). This extended spatial cover allows the identification of a northward thickening of sedimentary successions due to syndepositional differential subsidence. Basically, these successions formed on a low-energy falt-topped platform with limited accommodation space in which mainly retrogradational and aggradational stacking patterns were recorded. Overall, the evolution from continental meandering fluvial deposits at the base of the formation to tidal or wave-dominated siliciclastic and carbonate inner-platform deposits indicate a progressive marine transgression that reached its maximum during the Middle Toarcian bifrons Zone. In details, we identify two 3rd-order sequences that onlap southward onto the Triassic−Jurassic unconformity. Higher-energy siliciclastic shoreline facies were deposited in the upper transgressive systems tract of depositional sequences during periods of high accommodation space. The carbonate units consist of platform mud-dominated facies and are well-developed during the maximum marine transgressions of the two Marrat sequences. Continental red shales and fluvial sandstone deposited in a humid and warm environment during the Toarcian bifrons Zone (sublevisioni Subzone) indicate a higher terrigenous input interrupting the two maximum transgressive sequences. The sequences were likely produced by global sea-level changes but also appear to have been influenced by local climate changes with humid and warm conditions during periods of regression and more arid conditions during transgressions. This study serves as an outcrop analog, provides guidelines for hydrocarbon exploration and improves seismic interpretations. Overall, these new facies analyses, wireline log data, stratigraphic interpretations, and regional correlations contribute to a broader understanding of the Early Jurassic successions of the Arabian Platform.

Sequence stratigraphic analysis of the Lower Jurassic Precipice Sandstone and Evergreen Formation in the Surat Basin, Australia: Implications for the architecture of reservoirs and seals for CO2 storage

Abstract The Lower Jurassic Precipice Sandstone and Evergreen Formation in the Surat Basin, Australia are a highly prospective interval for carbon capture and storage (CCS). However, their stratigraphic nomenclature is inconsistently applied, and a basin-wide stratigraphic framework that is ubiquitously agreed upon remains elusive. In particular, a sandy transitional sandstone interval that occurs above the main Precipice Sandstone reservoir unit has caused confusion about how the two units should be subdivided. To address this issue, we integrate core observations with seismic interpretation and wireline log correlation to construct a sequence stratigraphic framework for the Lower Jurassic System that goes beyond lithostratigraphy. The main findings of our work include: (1) the identification of three 3rd-order sequences, SQ1-SQ3, from base to top. Two main sandstone intervals, the Precipice Sandstone and the Boxvale Sandstone Member (Evergreen Formation), represent the lowstand systems tracts (LSTs) of SQ1 and SQ3, respectively. The Westgrove Ironstone Member in the upper Evergreen Formation – a distinctive oolitic ironstone unit – represents the transgressive system tract (TST) of SQ3; (2) the transitional interval above the main Precipice Sandstone reservoir corresponds to the lower TST in SQ1 (lower Evergreen Formation). It is manifest as an upward-fining succession with a retrogradational facies stacking pattern, and is significantly different from the main Precipice Sandstone reservoir which shows an aggradational stacking pattern; (3) the Precipice Sandstone and lower Evergreen Formation progressively onlap the western and the eastern margins of the Surat Basin, and this confines the Precipice Sandstone to the central portion of the basin; (4) the three sequences (SQ1-SQ3) approximately coincide with global sea-level cycles documented from the early Jurassic. Two episodes of accelerated tectonic subsidence were responsible for the thinning and onlap of SQ1 and SQ3 onto the basin margins. In contrast, weaker tectonic subsidence was responsible for the overall finer grained sediment, the uniformity in thickness, and widespread distribution of SQ2. The results of our stratigraphic analysis indicate that the architecture of the reservoir and seal significantly differs from previous thinking, such that: (1) the Precipice Sandstone, the main reservoir unit, has a distribution that is limited to the basin centre; (2) the transitional interval above the main Precipice Sandstone reservoir forms poorly-connected, localized reservoirs that onlap and backstep towards the basin margins; and, (3) SQ2 and SQ3 are sealing units because they are very widespread and mud-dominated. Viewing the Precipice Sandstone and Evergreen Formation from a sequence stratigraphic standpoint provides important information about how to subdivide them and helps clarify the stratal relationships that were previously unclear from a mixture of terminology. Furthermore, this study gives insights into the spatial-temporal evolution of this reservoir and sealing interval that is an important CCS target in Australia.

Quantitative controls on the regional geometries and heterogeneities of the Rayda to Shu'aiba formations (Northern Oman) using forward stratigraphic modelling

Abstract The complex geometry of carbonate systems is influenced by a multitude of physical as well as biological processes. The Lower Cretaceous carbonates of Northern Oman are characterised by a variability of regional-scale geometries with expected vertical and lateral facies variations. The main environmental and tectonic controls acting on the depositional processes of the Lower Cretaceous ramps and platforms through space and geological time (in 4 dimensions) are only partially understood. In this study, we use a 4D DionisosFlow Forward Stratigraphic Modelling (FSM) approach to explore the role of: (i) eustasy; (ii) subsidence; (iii) initial paleobathymetry, and (iv) wave energy, to generate carbonate stacking patterns and heterogeneities. Carbonate production was maintained constant through deposition. Multi-disciplinary and multi-scale datasets were used (i.e. seismic, well and field data) to constrain the FSM input parameters and sensitivity analysis was carried out to validate or refute some depositional model hypotheses. Results show that basement topography and eustasy have the greatest influence on the progradational geometries and the lateral continuity of clinoform architectures during the Tithonian to Valanginian second-order super-sequence. In the Valanginian to Aptian super-sequence, subsidence was the primary control for the observed aggradational stacking pattern. Lateral and vertical stacking of carbonate lithologies, textures as well as facies are thus apprehended through this FSM approach, leading to a better assessment of petroleum systems elements as reservoir, seal and trap.

Late Campanian\u2013Maastrichtian sequence stratigraphy from Kurdistan foreland basin, NE/Iraq

The Kurdistan foreland basin (NE Iraq) was formed as a result of the ophiolite–radiolarites obduction of the Iranian plate on the Arabian Plate. Extensive fieldwork for the determination of nine facies associations has been integrated with the planktonic and large foraminifera and other macrofossils biostratigraphic data in order to identify the sequence stratigraphic framework of the studied (late Campanian–Maastrichtian) successions comprising the Shiranish, Tanjero and Aqra formations. The studied successions are identified sensu Vial et al. (Payton CE (ed) Seismic stratigraphy application to hydrocarbon exploration memoir of the American association of the petroleum geologists, Tulsa, vol 26, pp 49–62, 1977) concepts, as three third-order depositional systems, within one major second-order depositional system, which is bounded by a sequence boundary of type one at its base and top. The Late Campanian–Early Maastrichtian third order is bounded by a middle Campanian gap as a sequence of boundary type one. The rapid drowning starts with planktonic foraminiferal-rich mudstone which indicates pre-flysch facies associations within starved foreland basin conditions and maximum flooding surface (MFS175). The sea level fell by the Early Maastrichtian, as characterized by a sequence boundary of type SBT2. The distal, medial and proximal turbidites flysch facies of the Tanjero formations manifest the second third-order depositional system. This may indicate a progressive shallowing upwards and characterized by MFS 180, which is placed at the top of the last planktonic-rich shale parasequences. The last third order is represented by rudist (Hippurites)-dominated carbonate parasequences (Late Maastrichtian-Aqra formation). The aggradational stacking pattern of the rudist lithosomes indicates the last MFS 190 during the Maastrichtian greenhouse. The sequence boundary is of type one which separates the Palaeocene molasses of Swais Group from the Maastrichtian sequence in the imbricated zone, while in the high folded zone it is replaced by Kolosh siliciclastic (Palaeocene) due to migrations of the Kurdistan foreland basin depocentre towards south-west. The reactivation of the deep-seated transversal faults is in addition to the sea level changes with south-westwards migration of the Zagros deformations front controlling the late Campanian–Maastrichtian supersequences framework.

Response of geomorphic and geological processes to insufficient and ample sediment supply along the upper continental slope in the north-western South China Sea

We document upper slope sedimentary process and strata on the passive margin of the north-western South China Sea (SCS) using multibeam bathymetry and high-resolution seismic data. The upper slope can be divided into two segments based on geomorphology, strata, and sediment supply. (1) The east segment is characterised by deep incised canyons and gullies, and slope failure. Submarine canyons with both U- and V-shaped morphology (13–28 km long × 2–4 km wide) are oriented NNE–SSW or NNW–SSE and are approximately perpendicular to the slope. Erosion is dominant, with escarpments, slumps, and several mass transport deposits (MTDs). Shelf-margin clinoforms show strongly upward vertical aggradation with time and are strongly aggradational in style. Since 5.5 Ma, the shelf break line migrated southwards and then retreated to its present position. The segment is classified as erosion-dominated due to insufficient sediment supply. (2) The west segment has a smooth surface, gentle gradient, and a strongly progradational style, with MTDs triggered by high sedimentation rates. Shelf-margin clinoforms display a combination of progradational and aggradational stacking patterns. The shelf break line migrated southwards with time. The segment is classified as deposition-dominated, resulting from plentiful sediment supply. Depositional models have been constructed for each segment: a constant shelf break model with insufficient sediment supply in the east, and a migration shelf break model with plenty sediment supply in the west. This case study contributes to the understanding of the upper slope sedimentary process and stratigraphic style under different sediment supply conditions.

Contrasting alluvial architecture of Late Pleistocene and Holocene deposits along a 120-km transect from the central Po Plain (northern Italy)

High-resolution investigation of a ~120-km-long transect along the course of the modern Po River, northern Italy, revealed marked changes in alluvial architecture across the Pleistocene–Holocene boundary. Along the whole transect, a 20- to 30-m thick sheet-like succession of Late Pleistocene fluvial sands is invariably overlain by silt and clay deposits, with isolated fluvial bodies of Holocene age (<9.4cal ka BP). The Holocene succession displays consistent downstream changes in facies architecture: well-drained floodplain deposits are transitional at distal locations to increasingly organic, poorly drained floodplain to swamp facies associations. Thick paludal facies extend continuously up to 60km landward of the Holocene maximum marine ingression, about 90km from the modern shoreline. Based on 28 radiocarbon dates, the abrupt change in lithofacies and channel stacking pattern occurred at the transition from the last glacial period to the present interglacial, under conditions of rapid sea-level rise. The architectural change from amalgamated, Late Pleistocene sand bodies to overlying, mud-dominated Holocene units represent an example of chronologically well-constrained fluvial response to combined climate and relative sea-level change. The overall aggradational stacking pattern of individual channel-belt sand bodies indicates that high subsidence rates continuously created accommodation in the Po Basin, even during phases of falling sea level and lowstand.