Adhesion Performance Of Acrylic Pressure-sensitive Adhesives Research Articles

Behavior and Adhesion Performance of Acrylic PSAs using Semi-IPN Structure and UV/UV Stepwise Curing

Pressure-sensitive adhesives (PSAs) and UV-curable acrylic systems are widely utilized. In particular, PSAs have currently attracted significant attention because of their utility and applicability for manufacturing re-useable modules for smart devices. In this study, adhesion properties, UV-curing behavior, viscoelastic properties, and gel fraction were investigated. The UV/UV step curing process was utilized to overcome limitations, such as re-work or gap filling. The difference in physical properties between primary curing and secondary curing was confirmed. In addition, by adjusting the content of the crosslinking agent, the experiment based on controlling the structure of the semi-interpenetrating polymer network was conducted. We determined that physical properties varied with the crosslinking agent content. The degree of crosslinking was high, whereas the crosslinking density was low for 0.1–0.3 phr. However, both the degree of crosslinking and the crosslinking density increased for 0.5–1 phr.

Enhanced Adhesion and Cohesion of Bioinspired Dry/Wet Pressure-Sensitive Adhesives.

The byssus-mediated adhesion of marine mussels is a widely mimicked system for robust adhesion in both dry and wet conditions. Mussel holdfasts are fabricated from proteins that contain a significant amount of the unique catecholic amino acid dihydroxyphenylalanine, which plays a key role in enhancing interfacial adhesion to organic and inorganic marine surfaces and contributes to cohesive strength of the holdfast. In this work, pressure-sensitive adhesives (PSAs) were synthesized by copolymerization of dopamine methacrylamide (DMA) with common PSA monomers, butyl acrylate and acrylic acid, with careful attention paid to the effects of catechol on adhesive and cohesive properties. A combination of microscopic and macroscopic adhesion assays was used to study the effect of catechol on adhesion performance of acrylic PSAs. Addition of only 5% DMA to a conventional PSA copolymer containing butyl acrylate and acrylic acid resulted in 6-fold and 2.5-fold increases in work required to separate the PSA from silica and polystyrene, respectively, and a large increase in 180° peel adhesion against stainless steel after 24 h storage in both ambient and underwater conditions. Moreover, the holding power of the catechol PSAs on both steel and high-density polyethylene under shear load continuously increased as a function of catechol concentration, up to a maximum of 10% DMA. We also observed stark increases in shear and peel adhesion for the catecholic adhesives over PSAs with noncatecholic aromatic motifs, further underlining the benefits of catechols in PSAs. Overall, catechol PSAs perform extremely well on polar and metallic surfaces. The advantage of incorporating catechols in PSA formulations, however, is less straightforward for peel adhesion in nonpolar, organic substrates and tackiness of the PSAs.

Molecular weight and crosslinking on the adhesion performance and flexibility of acrylic PSAs

Acrylic pressure sensitive adhesives (PSAs) are used in the production of flexible displays. Acrylic PSAs must have high flexibility and recovery to meet the industry demands for flexible displays. For these reasons, acrylic PSAs were designed to determine the effects of molecular weight and cross-linking on acrylic PSAs. Stress relaxation and creep tests were measured with dynamic mechanical analysis to identify the flexibility and recovery of the acrylic PSAs. The molecular weight and glass transition temperature of the PSAs were measured by gel permeation chromatography and differential scanning calorimetry. A texture analyzer was used to measure the adhesion performance of the acrylic PSAs. With increasing molecular weight, the adhesion performance increased, especially from 86 to 108 K molecular weight PSAs. This is due to the entanglement of the polymer chains. The stress and recovery of cross-linked acrylic PSAs was much higher than that of neat acrylic PSAs. This result is attributed to interactions between the polymer chains due to cross-linking.

Optical properties and adhesion performance of acrylic PSAs; influence of functionalized monomer and curing agent

Acrylic pressure–sensitive adhesives (PSAs) were synthesized by solution polymerization using zirconium carboxyethyl acrylate (ZrCEA) with methyl aziridine derivatives (MAZ) as a curing agent. The acrylic PSAs were characterized by Fourier transform-infrared spectroscopy and gel contents. The viscoelastic properties of the acrylic PSAs were determined using an advanced rheometric expansion system. The adhesion performance of the acrylic PSAs was determined by measuring the probe tack, peel strength, shear adhesion failure temperature, and holding power. The optical properties of the acrylic PSAs were evaluated by the transmittance and refractive index. The results show that the adhesion performance and optical properties of the acrylic PSAs are influenced by the ZrCEA and MAZ content.

Effect of side chain on wettability and adhesion performance of acrylic pressure-sensitive adhesives on thin silicon wafer

Acrylic pressure-sensitive adhesives (PSAs) need to show proper adhesion and improved wettability on the silicon wafer as the wafer becomes thinner. The acrylic copolymers were synthesized by solution radical polymerization of 2-ethylhexyl acrylate, ethyl acrylate, and acrylic acid with AIBN as an initiator. Adhesion performance and wettability of acrylic PSAs were studied depending on the content of lauryl side chains and the degree of crosslinking. The introduction of lauryl side chain was characterized by Fourier transform infrared spectroscopy. The adhesion performance of acrylic PSAs having lauryl side chain was investigated using contact angle, wettability, probe tack, peel strength, and cohesiveness tests. The wettability of acrylic PSAs was improved significantly with increasing the content of lauryl side chain.