Acidic Oxygen Evolution Reaction Research Articles

Reconstructing Hydrogen-Bond Network for Efficient Acidic Oxygen Evolution.

Developing highly active oxygen evolution reaction (OER) catalysts in acidic conditions is a pressing demand for proton-exchange membrane water electrolysis. Manipulating proton character at the electrified interface, as the crux of all proton-coupled electrochemical reactions, is highly desirable but elusive. Herein we present a promising protocol, which reconstructs a connected hydrogen-bond network between the catalyst-electrolyte interface by coupling hydrophilic units to boost acidic OER activity. Modelling on N-doped-carbon-layer clothed Mn-doped-Co3O4 (Mn-Co3O4@CN), we unravel that the hydrogen-bond interaction between CN units and H2O molecule not only drags the free water to enrich the surface of Mn-Co3O4 but also serves as a channel to promote the dehydrogenation process. Meanwhile, the modulated local charge of the Co sites from CN units/Mn dopant lowers the OER barrier. Therefore, Mn-Co3O4@CN surpasses RuO2 at high current density (100 mA cm-2 @ ~538 mV).

Reconstructing Hydrogen‐Bond Network for Efficient Acidic Oxygen Evolution

AbstractDeveloping highly active oxygen evolution reaction (OER) catalysts in acidic conditions is a pressing demand for proton‐exchange membrane water electrolysis. Manipulating proton character at the electrified interface, as the crux of all proton‐coupled electrochemical reactions, is highly desirable but elusive. Herein we present a promising protocol, which reconstructs a connected hydrogen‐bond network between the catalyst‐electrolyte interface by coupling hydrophilic units to boost acidic OER activity. Modelling on N‐doped‐carbon‐layer clothed Mn‐doped‐Co3O4 (Mn−Co3O4@CN), we unravel that the hydrogen‐bond interaction between CN units and H2O molecule not only drags the free water to enrich the surface of Mn−Co3O4 but also serves as a channel to promote the dehydrogenation process. Meanwhile, the modulated local charge of the Co sites from CN units/Mn dopant lowers the OER barrier. Therefore, Mn−Co3O4@CN surpasses RuO2 at high current density (100 mA cm−2 @ ~538 mV).

Ultrathin amorphous NaIrRuOx nanosheets with rich oxygen vacancies for efficient acidic water oxidation

Developing highly active and durable catalysts for H2O/O2 conversion is particularly important in water electrolyzers for renewable hydrogen energy. Herein, we prepared ultrathin amorphous NaIrRuOx nanosheets (NSs) with a thickness of 1.2 nm with a large number of oxygen vacancies using a simple molten salt method. The NaIrRuOx NSs exhibits a low overpotential (η10, 10 mA cm−2) of 214 mV, and 8.6 and 45.7 times enhanced mass activitynoble metal at 1.53 V vs. RHE, as compared to the commercial RuO2 and IrO2, respectively. Furthermore, the NaIrRuOx NSs shows excellent corrosion and oxidation resistance in acidic oxygen evolution reaction (OER), as confirmed by a negligible potential increase after 100 h of continuous electrolysis. In a homemade PEMWE, a membrane electrode using NaIrRuOx NSs as the anode catalyst can achieve cell voltages of 1.74 V at 1 A cm−2 and operate stably at 1 A cm−2 for 350 h. Theoretical calculations indicated that the intercalation of Na+ into IrRuOx weakens the adsorption strength of OER intermediates, thus reducing the energy consumption in the conversion from O* to OOH*, and thus significantly improving the OER performance.

Cerium Dioxide as an Electron Buffer to Stabilize Iridium for Efficient Water Electrolysis

AbstractSustaining the steady state for highly active non‐stoichiometric iridium (Ir)‐based oxide (IrOx) at low Ir loading remains challenging primarily due to the continuous oxidation and sequent dissolution of Ir active sites during the oxygen evolution reaction (OER). In this context, a new iridium–cerium (Ce) substitution solid solution oxide (SSO) has been developed, featuring uniformly dispersed Ir atoms within Ce dioxide (CeO2) matrix as electron buffer, which delivers remarkable acidic OER catalytic activity and enhanced stability. The electron‐buffering capacity of CeO2 facilitates the charge transfer toward Ir atoms, leading to abundant active low‐valence Ir sites and effectively prevent their oxidation and dissolution. As a result, Ir─Ce SSO demonstrates an overpotential of merely 238 mV@10 mA cm−2. Proton exchange membrane water electrolyzer employing Ir─Ce SSO at a low Ir loading of 396 µgIr cm−2 operates consistently for over 100 h@500 mA cm−2. Density functional theory (DFT) calculations corroborate that the electron‐buffering effect of CeO2 enriches the density of IrIII and substantially increases the dissolution energy barrier of Ir atoms. This study presents a viable approach to addressing the issues of instability and low efficiency in Ir‐based OER electrocatalysts for acidic water electrolysis.

Ru/Ir-Based Electrocatalysts for Oxygen Evolution Reaction in Acidic Conditions: From Mechanisms, Optimizations to Challenges.

The generation of green hydrogen by water splitting is identified as a key strategic energy technology, and proton exchange membrane water electrolysis (PEMWE) is one of the desirable technologies for converting renewable energy sources into hydrogen. However, the harsh anode environment of PEMWE and the oxygen evolution reaction (OER) involving four-electron transfer result in a large overpotential, which limits the overall efficiency of hydrogen production, and thus efficient electrocatalysts are needed to overcome the high overpotential and slow kinetic process. In recent years, noble metal-based electrocatalysts (e.g., Ru/Ir-based metal/oxide electrocatalysts) have received much attention due to their unique catalytic properties, and have already become the dominant electrocatalysts for the acidic OER process and are applied in commercial PEMWE devices. However, these noble metal-based electrocatalysts still face the thorny problem of conflicting performance and cost. In this review, first, noble metal Ru/Ir-based OER electrocatalysts are briefly classified according to their forms of existence, and the OER catalytic mechanisms are outlined. Then, the focus is on summarizing the improvement strategies of Ru/Ir-based OER electrocatalysts with respect to their activity and stability over recent years. Finally, the challenges and development prospects of noble metal-based OER electrocatalysts are discussed.

Stabilizing Lattice Oxygen through Mn Doping in NiCo2O4−d Spinel Electrocatalysts for Efficient and Durable Acid Oxygen Evolution

Design the electrocatalysts without noble metal is still a challenge for oxygen evolution reaction (OER) in acid media. Herein, we reported the manganese doping method to decrease the concentration of oxygen vacancy (Vo) and form the Mn−O structure adjacent octahedral sites in spinel NiCo2O4−δ (NiMn1.5Co3O4−δ), which highly enhanced the activity and stability of spinel NiCo2O4−δ with a low overpotential (η) of 280 mV at j = 10 mA cm−2 and long‐term stability of 80 h in acid media. The isotopic labelling experiment based on differential electrochemical mass spectrometry (DEMS) clearly demonstrated the lattice oxygen in NiMn1.5Co3O4−δ is more stable due to strong Mn‐O bond and synergetic adsorbate evolution mechanism (SAEM) for acid OER. Density functional theory (DFT) calculations reveal highly increased oxygen vacancy formation energy (EVO) of NiCo2O4−δ after Mn doping. More importantly, the highly hydrogen bonding between Mn−O and *OOH adsorbed on adjacent Co octahedral sites promote the formation of *OO from *OOH due to the greatly enhanced charge density of O in Mn substituted sites.

Ir metal nanoparticles and IrO2 for acidic oxygen evolution reaction: Insight from Raman spectroscopy

Due to their high activity and stability, Ir-based materials are state-of-the-art electrocatalysts for oxygen evolution reaction (OER) under acidic conditions. However, many factors such as the influence of the activation/conditioning protocol and the resulting oxidation state or the effect of electrolyte adsorption on activity are still debated or overlooked. Herein, Raman spectroscopy was performed on commercial Ir black and IrO2 nanopowders to reveal differences in the samples after activation, as well as adsorption of perchlorates. Specifically, three different activation protocols were performed, 0.05 to 1.45 VRHE (activated), 0.05 to 1.6 VRHE (activated-long range (l.r.)), and 1.1 to 1.6 VRHE (activated-short range (s.r.)), resulting in different OER activity as well as different Raman spectra. However, only Ir(IV) bands remain visible in the ex situ Raman experiments, which was not sufficient to reveal the hydrated phases in the iridium samples. Therefore, mimicked in situ experiments were performed, which allowed the observation of the hydrated phase, particularly for Ir black, but also showed adsorption of perchlorate anions. In addition, the influence of solvation on Raman band shifts is revealed - along with DFT calculations. Overall, this work paves the way for our future in situ Raman spectroscopy experiments with iridium-based electrocatalysts during activation and OER.

Constructing high coordination number of Ir-O-Ru bonds in IrRuOx nanomeshes for highly stable acidic oxygen evolution reaction

Constructing high coordination number of Ir-O-Ru bonds in IrRuOx nanomeshes for highly stable acidic oxygen evolution reaction

Recent Advances in Iridium-based Electrocatalysts for Acidic Electrolyte Oxidation.

Ongoing research to develop advanced electrocatalysts for the oxygen evolution reaction (OER) is needed to address demand for efficient energy conversion and carbon-free energy sources. In the OER process, acidic electrolytes have higher proton concentration and faster response than alkaline ones, but their harsh strongly acidic environment requires catalysts with greater corrosion and oxidation resistance. At present, iridium oxide (IrO2) with its strong stability and excellent catalytic performance is the catalyst of choice for the anode side of commercial PEM electrolysis cells. However, the scarcity and high cost of iridium (Ir) and the unsatisfactory activity of IrO2 hinder industrial scale application and the sustainable development of acidic OER catalytic technology. This highlights the importance of further research on acidic Ir-based OER catalysts. In this review, recent advances in Ir-based acidic OER electrocatalysts are summarized, including fundamental understanding of the acidic OER mechanism, recent insights into the stability of acidic OER catalysts, highly efficient Ir-based electrocatalysts, and common strategies for optimizing Ir-based catalysts. The future challenges and prospects of developing highly effective Ir-based catalysts are also discussed.

Vertically Stacked Amorphous Ir/Ru/Ir Oxide Nanosheets for Boosted Acidic Water Splitting.

Integrating multiple functional components into vertically stacked heterostructures offers a prospective approach to manipulating the physicochemical properties of materials. The synthesis of vertically stacked heterogeneous noble metal oxides remains a challenge. Herein, we report a surface segregation approach to create vertically stacked amorphous Ir/Ru/Ir oxide nanosheets (NSs). Cross-sectional high-angle annular darkfield scanning transmission electron microscopy images demonstrate a three-layer heterostructure in the amorphous Ir/Ru/Ir oxide NSs, with IrOx layers located on the upper and lower surfaces, and a layer of RuOx sandwiched between the two IrOx layers. The vertically stacked heterostructure is a result of the diffusion of Ir atoms from the amorphous IrRuOx solid solution to the surface. The obtained A-Ir/Ru/Ir oxide NSs display an ultralow overpotential of 191 mV at 10 mA cm-2 toward acid oxygen evolution reaction and demonstrate excellent performance in a proton exchange membrane water electrolyzer, which requires only 1.63 V to achieve 1 A cm-2 at 60 °C, with virtually no activity decay observed after a 1300 h test.

Polarized Ultrathin BN Induced Dynamic Electron Interactions for Enhancing Acidic Oxygen Evolution.

Developing ruthenium-based heterogeneous catalysts with an efficient and stable interface is essential for enhanced acidic oxygen evolution reaction (OER). Herein, we report a defect-rich ultrathin boron nitride nanosheet support with relatively independent electron donor and acceptor sites, which serves as an electron reservoir and receiving station for RuO2, realizing the rapid supply and reception of electrons. Through precisely controlling the reaction interface, a low OER overpotential of only 180 mV (at 10 mA cm-2) and long-term operational stability (350 h) are achieved, suggesting potential practical applications. In situ characterization and theoretical calculations have validated the existence of a localized electronic recycling between RuO2 and ultrathin BN nanosheets (BNNS). The electron-rich Ru sites accelerate the adsorption of water molecules and the dissociation of intermediates, while the interconnection between the O-terminal and B-terminal edge establishes electronic back-donation, effectively suppressing the over-oxidation of lattice oxygen. This study provides a new perspective for constructing a stable and highly active catalytic interface.

Highly Crystalline Iridium-Nickel Nanocages with Subnanopores for Acidic Bifunctional Water Splitting Electrolysis.

Developing efficient bifunctional materials is highly desirable for overall proton membrane water splitting. However, the design of iridium materials with high overall acidic water splitting activity and durability, as well as an in-depth understanding of the catalytic mechanism, is challenging. Herein, we successfully developed subnanoporous Ir3Ni ultrathin nanocages with high crystallinity as bifunctional materials for acidic water splitting. The subnanoporous shell enables Ir3Ni NCs optimized exposure of active sites. Importantly, the nickel incorporation contributes to the favorable thermodynamics of the electrocatalysis of the OER after surface reconstruction and optimized hydrogen adsorption free energy in HER electrocatalysis, which induce enhanced intrinsic activity of the acidic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Together, the Ir3Ni nanocages achieve 3.72 A/mgIr(η=350mV) and 4.47 A/mgIr(η=40mV) OER and HER mass activity, which are 18.8 times and 3.3 times higher than that of commercial IrO2 and Pt, respectively. In addition, their highly crystalline identity ensures a robust nanostructure, enabling good catalytic durability during the oxygen evolution reaction after surface oxidation. This work provides a new revenue toward the structural design and insightful understanding of metal alloy catalytic mechanisms for the bifunctional acidic water splitting electrocatalysis.

Distance effect of single atoms on stability of cobalt oxide catalysts for acidic oxygen evolution

Developing efficient and economical electrocatalysts for acidic oxygen evolution reaction (OER) is essential for proton exchange membrane water electrolyzers (PEMWE). Cobalt oxides are considered promising non-precious OER catalysts due to their high activities. However, the severe dissolution of Co atoms in acid media leads to the collapse of crystal structure, which impedes their application in PEMWE. Here, we report that introducing acid-resistant Ir single atoms into the lattice of spinel cobalt oxides can significantly suppress the Co dissolution and keep them highly stable during the acidic OER process. Combining theoretical and experimental studies, we reveal that the stabilizing effect induced by Ir heteroatoms exhibits a strong dependence on the distance of adjacent Ir single atoms, where the OER stability of cobalt oxides continuously improves with decreasing the distance. When the distance reduces to about 0.6 nm, the spinel cobalt oxides present no obvious degradation over a 60-h stability test for acidic OER, suggesting potential for practical applications.

Rapid Conversion from Alloy Nanoparticles to Oxide Nanowires: Strain Wave-Driven Ru-O-Mn Collaborative Catalysis for Durable Oxygen Evolution Reaction.

Metal-doped ruthenium oxides with low prices have gained widespread attention due to their editable compositions, distorted structures, and diverse morphologies for electrocatalysis. However, the mainstream challenge lies in breaking the so-called seesaw relationship between activity and stability during acidic oxygen evolution reaction (OER). Herein, strain wave-featured Mn-RuO2 nanowires (NWs) with asymmetric Ru-O-Mn bonds are first fabricated by thermally driven rapid solid phase conversion from RuMn alloy nanoparticles (NPs) at moderate temperature (450 °C). In 0.5M H2SO4, the resultant NWs display a surprisingly ultralow overpotential of 168mV at 10mA cm-2 and run at a stable cell voltage (1.67V) for 150h at 50mA cm-2 in PEMWE, far exceeding IrO2||Pt/C assemble. The simultaneous enhancement of both activity and stability stems from the presence of dense strain waves composed of alternating compressive and tensile ones in the distorted NWs, which collaboratively activate the Ru-O-Mn sites for faster OER. More importantly, the atomic strain waves trigger dynamic Ru-O-Mn regeneration via the refilling of oxygen vacancies by oxyanions adsorbed on adjacent Mn and Ru sites, achieving long-term stability. This work opens a door to designing non-precious metal-assisted ruthenium oxides with unique strains for practical application in commercial PEMWE.

Investigation of the Relationship between Metal Loading and Acidic Oxygen Evolution Reaction Activity in Single-Atom Catalysts

Investigation of the Relationship between Metal Loading and Acidic Oxygen Evolution Reaction Activity in Single-Atom Catalysts

High-Performance Iridium-Molybdenum Oxide Electrocatalysts for Water Oxidation in Acid: Bayesian Optimization Discovery and Experimental Testing.

Ir oxides are costly and scarce catalysts for oxygen evolution reaction (OER) in acid. There has been extensive interest in developing alternatives that are either Ir-free or require smaller amounts of Ir to drive the reactions at acceptable rates. One design strategy is to identify Ir-based mixed oxides that achieve similar performance while requiring smaller amounts of Ir. The obstacle to this strategy has been a very large phase space of the Ir-based mixed metal oxides, in terms of the metals combined with Ir and the different crystallographic structures of the mixed oxides, which prevents a thorough exploration of possible materials. In this work, we developed a workflow that uses machine-learning-aided Bayesian optimization in combination with density functional theory to make the exploration of this phase space plausible. This screening identified Mo as a promising dopant for forming acid-tolerant Ir-based oxides for the OER. We synthesized and characterized the Ir-Mo mixed oxides in the form of thin-film electrocatalysts with a known surface area. We show that these mixed oxides exhibited overpotentials ∼30 mV lower than a pure Ir control while maintaining 24% lower Ir dissolution rates than the Ir control. These findings suggest that Mo is a promising dopant and highlight the promise of machine learning to guide the experimental exploration and optimization of catalytic materials.

Lowering the kinetic barrier via enhancing electrophilicity of surface oxygen to boost acidic oxygen evolution reaction

Lowering the kinetic barrier via enhancing electrophilicity of surface oxygen to boost acidic oxygen evolution reaction

2D Ruthenium-Chromium Oxide with Rich Grain Boundaries Boosts Acidic Oxygen Evolution Reaction Kinetics.

Ruthenium oxide is currently considered as the promising alternative to Ir-based catalysts employed for proton exchange membrane water electrolyzers but still faces the bottlenecks of limited durability and slow kinetics. Herein, a 2D amorphous/crystalline heterophase ac-Cr0.53Ru0.47O2-δ substitutional solid solution with pervasive grain boundaries (GBs) is developed to accelerate the kinetics of acidic oxygen evolution reaction (OER) and extend the long-term stability simultaneously. The ac-Cr0.53Ru0.47O2-δ shows a super stability with a slow degradation rate and a remarkable mass activity of 455AgRu -1 at 1.6V vs RHE, which is ≈3.6- and 5.9-fold higher than those of synthesized RuO2 and commercial RuO2, respectively. The strong interaction of Cr-O-Ru local units in synergy with the specific 2D structural characteristics of ac-Cr0.53Ru0.47O2-δ dominates its enhanced stability. Meanwhile, high-density GBs and the shortened Ru-O bonds tailored by amorphous/crystalline structure and Cr-O-Ru interaction regulate the adsorption and desorption rates of oxygen intermediates, thus accelerating the overall acidic OER kinetics.

Stabilizing Highly Active Ru Sites by Electron Reservoir in Acidic Oxygen Evolution.

Proton exchange membrane water electrolysis is hindered by the sluggish kinetics of the anodic oxygen evolution reaction. RuO2 is regarded as a promising alternative to IrO2 for the anode catalyst of proton exchange membrane water electrolyzers due to its superior activity and relatively lower cost compared to IrO2. However, the dissolution of Ru induced by its overoxidation under acidic oxygen evolution reaction (OER) conditions greatly hinders its durability. Herein, we developed a strategy for stabilizing RuO2 in acidic OER by the incorporation of high-valence metals with suitable ionic electronegativity. A molten salt method was employed to synthesize a series of high-valence metal-substituted RuO2 with large specific surface areas. The experimental results revealed that a high content of surface Ru4+ species promoted the OER intrinsic activity of high-valence doped RuO2. It was found that there was a linear relationship between the ratio of surface Ru4+/Ru3+ species and the ionic electronegativity of the dopant metals. By regulating the ratio of surface Ru4+/Ru3+ species, incorporating Re, with the highest ionic electronegativity, endowed Re0.1Ru0.9O2 with exceptional OER activity, exhibiting a low overpotential of 199 mV to reach 10 mA cm-2. More importantly, Re0.1Ru0.9O2 demonstrated outstanding stability at both 10 mA cm-2 (over 300 h) and 100 mA cm-2 (over 25 h). The characterization of post-stability Re0.1Ru0.9O2 revealed that Re promoted electron transfer to Ru, serving as an electron reservoir to mitigate excessive oxidation of Ru sites during the OER process and thus enhancing OER stability. We conclude that Re, with the highest ionic electronegativity, attracted a mass of electrons from Ru in the pre-catalyst and replenished electrons to Ru under the operating potential. This work spotlights an effective strategy for stabilizing cost-effective Ru-based catalysts for acidic OER.

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis