Acanthamoeba Myosins IA Research Articles

Organization and Ligand Binding Properties of the Tail ofAcanthamoeba Myosin-IA: IDENTIFICATION OF AN ACTIN-BINDING SITE IN THE BASIC (TAIL HOMOLOGY-1) DOMAIN

The Acanthamoeba myosin-IA heavy chain gene encodes a 134-kDa protein with a catalytic domain, three potential light chain binding sites, and a tail with separately folded tail homology (TH) -1, -2, and -3 domains. TH-1 is highly resistant to trypsin digestion despite consisting of 15% lysine and arginine. TH-2/3 is resistant to alpha-chymotrypsin digestion. The peptide link between TH-1 and TH-2/3 is cleaved by trypsin, alpha-chymotrypsin, and endo-AspN but not V8 protease. The CD spectra of TH-2/3 indicate predominantly random structure, turns, and beta-strands but no alpha-helix. The hydrodynamic properties of TH-2/3 (Stokes' radius of 3.0 nm, sedimentation coefficient of 1.8 S, and molecular mass of 21.6 kDa) indicate that these domains are as long as the whole myosin-I tail in reconstructions of electron micrographs. Furthermore, separately expressed and purified TH-1 binds with high affinity to TH-2/3. Thus we propose that TH-1 and TH-2/3 are arranged side by side in the myosin-IA tail. Separate TH-1, TH-2, and TH-2/3 each binds muscle actin filaments with high affinity. Salt inhibits TH-2/3 binding to muscle actin but not amoeba actin filaments. TH-1 enhances binding of TH-2/3 to muscle actin filaments at physiological salt concentration, indicating that TH-1 and TH-2/3 cooperate in actin binding. An intrinsic fluorescence assay shows that TH-2/3 also binds with high affinity to the protein Acan125 similar to the SH3 domain of myosin-IC. Phylogenetic analysis of SH3 sequences suggests that myosin-I acquired SH3 domain after the divergence of the genes for myosin-I isoforms.

Biochemical kinetic characterization of the Acanthamoeba myosin-I ATPase.

Acanthamoeba myosin-IA and myosin-IB are single-headed molecular motors that may play an important role in membrane-based motility. To better define the types of motility that myosin-IA and myosin IB can support, we determined the rate constants for key steps on the myosin-I ATPase pathway using fluorescence stopped-flow, cold-chase, and rapid-quench techniques. We determined the rate constants for ATP binding, ATP hydrolysis, actomyosin-I dissociation, phosphate release, and ADP release. We also determined equilibrium constants for myosin-I binding to actin filaments, ADP binding to actomyosin-I, and ATP hydrolysis. These rate constants define an ATPase mechanism in which (a) ATP rapidly dissociates actomyosin-I, (b) the predominant steady-state intermediates are in a rapid equilibrium between actin-bound and free states, (c) phosphate release is rate limiting and regulated by heavy-chain phosphorylation, and (d) ADP release is fast. Thus, during steady-state ATP hydrolysis, myosin-I is weakly bound to the actin filament like skeletal muscle myosin-II and unlike the microtubule-based motor kinesin. Therefore, for myosin-I to support processive motility or cortical contraction, multiple myosin-I molecules must be specifically localized to a small region on a membrane or in the actin-rich cell cortex. This conclusion has important implications for the regulation of myosin-I via localization through the unique myosin-I tails. This is the first complete transient kinetic characterization of a member of the myosin superfamily, other than myosin-II, providing the opportunity to obtain insights about the evolution of all myosin isoforms.

The chemical mechanism of myosin-I: implications for actin-based motility and the evolution of the myosin family of motor proteins.

The Acanthamoeba myosin-IA and myosin-IB molecular motors bind to membranes, so they may produce the force to move organelles and membranes along actin filaments. We have determined the rate constants for the actin-activated myosin-I ATPase by pre-steady state kinetic analysis. ATP binds rapidly to myosin-I and dissociates the enzyme from actin filaments at a rate > 500 s-1. Myosin-I hydrolyzes ATP to ADP and inorganic phosphate (Pi) at 20-50 s-1. Phosphate dissociation is the rate limiting step in the ATPase cycle, 0.01 s-1 for myosin-I alone and at 10 s-1 when myosin-I is bound to actin filaments. ADP dissociation is rapid. Phosphorylation controls the ATPase cycle by increasing the rate of phosphate release from myosin-I bound to actin. At steady state the major species are myosin-ATP and myosin-ADP-Pi, which rapidly bind to and dissociate from actin filaments. During the ATPase cycle myosin-I binds so weakly to actin filaments that it cannot support processive movement like kinesin, unless several motors cluster together on a membrane or actin filament. These properties of the enzyme emphasize the importance of characterizing mechanisms that promote the self-association of myosin-I isoforms at specific binding sites in cells.

Localization and specificity of the phospholipid and actin binding sites on the tail of Acanthamoeba myosin IC.

We used bacterially expressed beta-galactosidase fusion proteins to localize the phospholipid binding domain of Acanthamoeba myosin IC to the region between amino acids 701 and 888 in the NH2-terminal half of the tail. Using a novel immobilized ligand lipid binding assay, we determined that myosin I can bind to several different acidic phospholipids, and that binding requires a minimum of 5 mol% acidic phospholipid in a neutral lipid background. The presence of di- and triglycerides and sterols in the lipid bilayer do not contribute to the affinity of myosin I for membranes. We confirm that the ATP-insensitive actin binding site is contained in the COOH-terminal 30 kD of the tail as previously shown for Acanthamoeba myosin IA. We conclude that the association of the myosin IC tail with acidic phospholipid head groups supplies much of the energy for binding myosin I to biological membranes, but probably not specificity for targeting myosin I isoforms to different cellular locations.

Substrate specificity of Acanthamoeba myosin I heavy chain kinase as determined with synthetic peptides.

Phosphorylation of a single threonine (myosin IA) or serine (myosins IB and IC) in the heavy chains of the Acanthamoeba myosin I isozymes is required for expression of their actin-activated Mg2(+)-ATPase activities. We now report that the synthetic peptide Gly-Arg-Gly-Arg-Ser-Ser-Val-Tyr-Ser, which corresponds to the phosphorylated region of Acanthamoeba myosin IC, is a good substrate for myosin I heavy chain kinase: Km = 54 microM, and Vmax = 15 mumols/min.mg. The same serine is phosphorylated as in the native substrate (residue 6 in the above sequence), and kinase activity with the synthetic peptide as substrate is also stimulated by phosphatidylserine-enhanced autophosphorylation of the kinase. These results indicate that all of the essential sequence determinants of kinase specificity are contained within this 9-residue peptide. With the peptide as substrate, we found that another acidic phospholipid, phosphatidylinositol, also enhances autophosphorylation of the kinase whereas the neutral phospholipids phosphatidylcholine and phosphatidylethanolamine do not. By comparing the Km and Vmax values for a series of synthetic peptide substrates, we established that 1 basic amino acid is essential on the NH2-terminal side of the phosphorylation site, and two are preferable, and that a tyrosine is essential 2 residues away on the COOH-terminal side. There is a slight preference for arginines over lysines. All of these local sequence specificity determinants are present in the three native substrates, Acanthamoeba myosins IA, IB, and IC, and in two Dictyostelium myosin I isozymes that are putative substrates for the kinase. Similar sequences do not occur in the myosins I from intestinal brush border, which is not a substrate for the Acanthamoeba kinase.

The localization and sequence of the phosphorylation sites of Acanthamoeba myosins I: An improved method for locating the phosphorylated amino acid

The actin-activated Mg2+-ATPase activities of Acanthamoeba myosins IA, IB, and IC are expressed only when a single site in their heavy chains is phosphorylated by a myosin I heavy chain-specific kinase. We show that phosphorylation occurs at Ser-315 in the myosin IB heavy chain, Ser-311 in myosin IC, and a threonine residue at a corresponding position in myosin IA whose amino acid sequence is as yet unknown. The most obvious feature common to the three substrates is a basic amino acid(s) 2 or 3 residues before the site of phosphorylation. The phosphorylation site is located between the ATP- and actin-binding sites, which corresponds to the middle of the 50-kDa domain of skeletal muscle myosin subfragment 1. The sequence similarity between the region surrounding the phosphorylation site of myosin I and subfragment 1 is much lower than the average sequence similarity between myosin I and subfragment 1. This is consistent with the hypothesis that the conformation of this region of myosin I differs from that of the corresponding region in skeletal muscle myosin and that phosphorylation converts the conformation of the actomyosin I complex into a conformation comparable to that present in actosubfragment 1 without phosphorylation. The protein sequences obtained in the course of this work led to the conclusion that the myosin I genes previously identified as myosin IB and IL (myosin-like) heavy chains actually are the myosin IC and IB heavy chains, respectively. Finally, we report a modification of the method for monitoring the appearance of 32Pi during sequencing of 32P-labeled peptides that results in almost complete recovery of the radioactivity, thus allowing unequivocal assignment of the position of the phosphorylated residue.

The effect of actin and phosphorylation on the tryptic cleavage pattern of Acanthamoeba myosin IA

The Mg2+-ATPase activity of Acanthamoeba myosin IA is activated by F-actin only when the myosin heavy chain is phosphorylated at a single residue. In order to gain insight into the conformational changes that may be responsible for the effects of F-actin and phosphorylation on myosin I ATPase, we have studied their effects on the proteolysis of the myosin IA heavy chain by trypsin. Trypsin initially cleaves the unphosphorylated, 140-kDa heavy chain of Acanthamoeba myosin IA at sites 38 and 112 kDa from its NH2 terminus and secondarily at sites 64 and 91 kDa from the NH2 terminus. F-actin has no effect on tryptic cleavage at the 91- and 112-kDa sites, but does protect the 38-kDa site and the 64-kDa site. Phosphorylation (which occurs very near the 38-kDa site) has no detectable effect on the tryptic cleavage pattern in the absence of F-actin or on F-actin protection of the 64-kDa site, but significantly enhances F-actin protection of the 38-kDa site. Protection of the 64-kDa site is probably due to direct steric blocking because F-actin binds to this region of the heavy chain. The protection of the 38-kDa site by F-actin may be the result of conformational changes in this region of the heavy chain induced by F-actin binding near the 64-kDa site and by phosphorylation. The conformational changes in the heavy chain of myosin IA that are detected by alterations in its susceptibility to proteolysis are likely to be related to the conformational changes that are involved in the phosphorylation-regulated actin-activated Mg2+-ATPase activities of Acanthamoeba myosins IA and IB.

Limited tryptic digestion of Acanthamoeba myosin IA abolishes regulation of actin-activated ATPase activity by heavy chain phosphorylation.

Acanthamoeba myosin IA is a globular protein composed of a 140-kDa heavy chain and a 17-kDa light chain. It expresses high actin-activated Mg2+-ATPase activity when one serine on the heavy chain is phosphorylated. We previously showed that chymotrypsin cleaves the heavy chain into a COOH-terminal 27-kDa peptide that can bind to F-actin but has no ATPase activity and a complex containing the NH2-terminal 112-kDa peptide and the light chain. The complex also binds F-actin and has full actin-activated Mg2+-ATPase activity when the regulatory site is phosphorylated. We have now localized the ATP binding site to within 27 kDa of the NH2 terminus and the regulatory phosphorylatable serine to a 20-kDa region between 38 and 58 kDa of the NH2 terminus. Under controlled conditions, trypsin cleaves the heavy chain at two sites, 38 and 112 kDa from the NH2 terminus, producing a COOH-terminal 27-kDa peptide similar to that produced by chymotrypsin and a complex consisting of an NH2-terminal kDa peptide, a central 74-kDa peptide, and the light chain. This complex is similar to the chymotryptic complex but for the cleavage which separates the 38- and 74-kDa peptides. The tryptic complex has full (K+, EDTA)-ATPase activity (the catalytic site is functional) and normal ATP-sensitive actin-binding properties. However, the actin-activated Mg2+-ATPase activity and the F-actin-binding characteristics of the tryptic complex are no longer sensitive to phosphorylation of the regulatory serine. Therefore, cleavage between the phosphorylation site and the ATP-binding site inhibits the effects of phosphorylation on actin binding and actin-activated Mg2+-ATPase activity without abolishing the interactions between the ATP- and actin-binding sites.

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA.

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.

Characterization of monoclonal antibodies to Acanthamoeba myosin-I that cross-react with both myosin-II and low molecular mass nuclear proteins.

We characterized nine monoclonal antibodies that bind to the heavy chain of Acanthamoeba myosin-IA. Eight of these antibodies bind to myosin-IB and eight cross-react with Acanthamoeba myosin-II. All but one of the antibodies bind to a 30-kD chymotryptic peptide of myosin-IA that derives from the COOH terminus of the molecule, and to tryptic peptides as small as 17 kD, hence these epitopes are clustered closely together on the heavy chain. None of the antibodies prevent heavy chain phosphorylation by myosin-I heavy chain kinase. One antibody inhibits the K+-EDTA ATPase activity and three antibodies inhibit the actin-activated Mg++-ATPase activity of myosin-I under the set of conditions that we tested. When fluorescent antibody staining of both whole cells and isolated nuclei is done, several of these monoclonal antibodies react strongly with nuclei. These antibodies also stain the cytoplasmic matrix, especially the cortex near the plasma membrane. All nine of the monoclonal antibodies bind to polypeptides of 30-34 kD that are highly enriched in nuclei isolated from Acanthamoeba. There is no myosin-I in the isolated nuclei, so the 30-34-kD polypeptides, not myosin-I, are responsible for the nuclear staining.

Effect of actin filament length and filament number concentration on the actin-activated ATPase activity of Acanthamoeba myosin I.

The actin-activated Mg2+-ATPase activities of phosphorylated Acanthamoeba myosins IA and IB were previously found to have a highly cooperative dependence on myosin concentration (Albanesi, J. P., Fujisaki, H., and Korn, E. D. (1985) J. Biol. Chem. 260, 11174-11179). This behavior is reflected in the requirement for a higher concentration of F-actin for half-maximal activation of the myosin Mg2+-ATPase at low ratios of myosin:actin (noncooperative phase) than at high ratios of myosin:actin (cooperative phase). These phenomena could be explained by a model in which each molecule of the nonfilamentous myosins IA and IB contains two F-actin-binding sites of different affinities with binding of the lower affinity site being required for expression of actin-activated ATPase activity. Thus, enzymatic activity would coincide with cross-linking of actin filaments by myosin. This theoretical model predicts that shortening the actin filaments and increasing their number concentration at constant total F-actin should increase the myosin concentration required to obtain the cooperative increase in activity and should decrease the F-actin concentration required to reach half-maximal activity at low myosin:actin ratios. These predictions have been experimentally confirmed by shortening actin filaments by addition of plasma gelsolin, an F-actin capping/severing protein. In addition, we have found that actin "filaments" as short as the 1:2 gelsolin-actin complex can significantly activate Acanthamoeba myosin I.

Experimental evidence for the contractile activities of Acanthamoeba myosins IA and IB.

The low-shear viscosity of 5-30 microM F-actin was greatly increased by the addition of 0.1-0.5 microM unphosphorylated Acanthamoeba myosins IA and IB. The increase in viscosity was about the same in 2 mM ADP as in the absence of free nucleotide but was much less in 2 mM ATP. The single-headed monomolecular Acanthamoeba myosins were as effective as an equal molar concentration of two-headed muscle heavy meromyosin and much more effective than single-headed muscle myosin subfragment-1. These results suggest that Acanthamoeba myosins IA and IB can cross-link actin filaments as proposed in the accompanying paper (Albanesi, J. P., Fujisaki, H., and Korn, E. D. (1985) J. Biol. Chem. 260, 11174-11179) to explain the actin-dependent cooperative increase in actin-activated Mg2+-ATPase activity as a function of the concentration of myosin I. Superprecipitation occurred when phosphorylated myosin IA or IB was mixed with F-actin. In addition to myosin I heavy chain phosphorylation, superprecipitation required Mg2+ and ATP. ATP hydrolysis was linear during the time course of the superprecipitation, and inhibitors of ATP hydrolysis inhibited superprecipitation. A small, dense contracted gel was formed when the reaction was carried out in a cuvette, and a birefringent actomyosin thread resulted from superprecipitation in a microcapillary. The rate and extent of superprecipitation depended on the actin and myosin I concentrations with maximum superprecipitation occurring at an actin:myosin ratio of 7:1. These results provide strong evidence for the ability of Acanthamoeba myosins IA and IB to perform contractile and motile functions.

A kinetic model for the molecular basis of the contractile activity of Acanthamoeba myosins IA and IB.

Acanthamoeba myosins IA and IB are single-headed, monomeric molecules consisting of one heavy chain and one light chain. Both have high actin-activated Mg2+-ATPase activity, when the heavy chain is phosphorylated, but neither seems to be able to form the bipolar filaments that are generally thought to be required for actomyosin-dependent contractility. In this paper, we show that, at fixed F-actin concentration, the actin-activated Mg2+-ATPase activities of myosins IA and IB increase about 5-fold in specific activity in a cooperative manner as the myosin concentration is increased. The myosin concentration range over which this cooperative change occurs depends on the actin concentration. More myosin I is required for the cooperative increase in activity at high concentrations of F-actin. The cooperative increase in specific activity at limiting actin concentrations is caused by a decrease in the KATPase for F-actin. The high and low KATPase states of the myosin have about the same Vmax at infinite actin concentration. Both myosins are completely bound to the F-actin long before the Vmax values are reached. Therefore, much of the actin activation must be the result of interactions between F-actin and actomyosin. These kinetic data can be explained by a model in which the cooperative shift of myosin I from the high KATPase to the low KATPase state results from the cross-linking of actin filaments by myosin I. Cross-linking might occur either through two actin-binding sites on a single molecule or by dimers or oligomers of myosin I induced to form by the interaction of myosin I monomers with the actin filaments. The ability of Acanthamoeba myosins IA and IB to cross-link actin filaments is demonstrated in the accompanying paper (Fujisaki, H., Albanesi, J.P., and Korn, E.D. (1985) J. Biol. Chem. 260, 11183-11189).

Monomeric Acanthamoeba myosins I support movement in vitro.

Acanthamoeba myosins IA and IB were found to have molecular weights of 159,000 and 150,000 and Stokes radii of 6.2 and 5.9 nm, respectively. Both enzymes have frictional ratios of 1.7. Myosin IA consists of 22% alpha-helix, 32% beta-structure, and 46% unordered structure, while myosin IB is 16% alpha-helix, 46% beta-structure, and 38% unordered. Both myosins remain monomolecular under conditions in which other myosins form filaments. Beads coated with myosin IA or IB move unidirectionally on actin cables of Nitella. Movement requires ATP and phosphorylation of the myosin I heavy chain which is also required for actin-activated Mg2+-ATPase activity. Movement is inhibited by myosin I antiserum that inhibits actin-activated ATPase activity. These studies establish that these nonfilamentous, monomolecular myosins with single heavy chains of 130,000 and 125,000 daltons (IA and IB, respectively) can support actin-dependent movement analogous to that supported by filamentous myosins.

Purification from Dictyostelium discoideum of a low-molecular-weight myosin that resembles myosin I from Acanthamoeba castellanii.

A low-molecular-weight myosin has been purified 1500-fold from extracts of Dictyostelium discoideum, based on the increase in K+,EDTA-ATPase specific activity. The purified enzyme resembles the single-headed, low-molecular-weight myosins IA and IB from Acanthamoeba castellanii, and differs from the conventional two-headed, high-molecular-weight myosin previously isolated from Dictyostelium, in several ways. It has higher K+,EDTA-ATPase activity than Ca2+-ATPase activity; it has a native molecular mass of about 150,000 and a single heavy chain of about 117,000; the 117,000-dalton heavy chain is phosphorylated by Acanthamoeba myosin I heavy chain kinase; phosphorylation of its heavy chain enhances its actin-activated Mg2+-ATPase activity; and the 117,000-dalton heavy chain reacts with antibodies raised against the heavy chain of Acanthamoeba myosin IA. None of these properties is shared by the low-molecular-weight active fragment that can be produced by chymotryptic digestion of conventional Dictyostelium myosin. We conclude that Dictyostelium contains an enzyme of the myosin I type previously isolated only from Acanthamoeba.

Localization of the active site and phosphorylation site of Acanthamoeba myosins IA and IB.

The 130- and 125-kDa heavy chains of Acanthamoeba myosins IA and IB were radioactively labeled at either the regulatory phosphorylation site or the catalytic site and then subjected to controlled proteolysis by either trypsin or chymotrypsin. The labeled and unlabeled peptides generated during the course of proteolysis were identified by autoradiography and Coomassie Blue staining after separation by electrophoresis on sodium dodecyl sulfate-polyacrylamide gels. The relative positions of the phosphorylation and active sites could be deduced. The catalytic site of myosin IA is most probably within 38 kDa of one end of the 130-kDa heavy chain, and the phosphorylation site, which can be no more than 40 kDa away from the catalytic site, would then be between 38 and 78 kDa of that same end of the heavy chain. Possibly, the phosphorylation site is further restricted to the region between 38 and 64 kDa from the end of the heavy chain. The catalytic and phosphorylation sites of myosin IB are both contained within a segment of 62 kDa at one end of the 125-kDa heavy chain and are within 40 kDa of each other. The phosphorylation site may be restricted to a small segment between 60 and 62 kDa from one end of the heavy chain which would limit the possible position of the catalytic site to the region between 20 and 60 kDa of that end.

Acanthamoeba myosin IA, IB, and II heavy chains are synthesized in vitro from Acanthamoeba messenger RNA.

Addition of a myosin IB polyclonal antibody, which reacts with the heavy chains of both myosins IA and IB, to the [35S]methionine-labeled proteins synthesized in vitro using Acanthamoeba messenger RNA specifically immunoprecipitated radioactive polypeptides that migrated on sodium dodecyl sulfate-polyacrylamide gels exactly with the heavy chains of purified myosins IA and IB. A myosin II polyclonal antibody specifically immunoprecipitated a radioactive polypeptide which migrated exactly with the heavy chain of myosin II. These results provide strong evidence that Acanthamoeba myosins IA, IB, and II are separate gene products and that the purified proteins contain native, undegraded heavy chains. These results are especially important for myosins IA and IB, because they possess unusually small heavy chains for myosins.

Purification and characterization of a myosin I heavy chain kinase from Acanthamoeba castellanii.

In previous work from this laboratory, a partially purified protein kinase from the soil amoeba Acanthamoeba castellanii was shown to phosphorylate the heavy chain of the two single-headed Acanthamoeba myosin isoenzymes, myosin IA and IB, resulting in a 10- to 20-fold increase in their actin-activated Mg2+-ATPase activities (Maruta, H., and Korn, E.D. (1977) J. Biol. Chem. 252, 8329-8332). A myosin I heavy chain kinase has now been purified to near homogeneity from Acanthamoeba by chromatography on DE-52 cellulose, phosphocellulose, and Procion red dye, followed by chromatography on histone-Sepharose. Myosin I heavy chain kinase contains a single polypeptide of 107,000 Da by electrophoretic analysis. Molecular sieve chromatography yields a Stokes radius of 4.1 nm, consistent with a molecular weight of 107,000 for a native protein with a frictional ratio of approximately 1.3:1. The kinase catalyzes the incorporation of 0.9 to 1.0 mol of phosphate into the heavy chain of both myosins IA and IB. Phosphoserine has been shown to be the phosphorylated amino acid in myosin IB. The kinase has highest specific activity toward myosin IA and IB, about 3-4 mumol of phosphate incorporated/min/mg (30 degrees C) at concentrations of myosin I that are well below saturating levels. The kinase also phosphorylates histone 2A, isolated smooth muscle light chains, and, to a very small extent, casein, but has no activity toward phosvitin or myosin II, a third Acanthamoeba myosin isoenzyme with a very different structure from myosin IA and IB. Myosin I heavy chain kinase requires Mg2+ but is not dependent on Ca2+, Ca2+/calmodulin, or cAMP for activity. The kinase undergoes an apparent autophosphorylation.

Proteolytic separation of the actin-activatable ATPase site from the phosphorylation site on the heavy chain of Acanthamoeba myosin IA.

Previous work (Maruta, H., Gadasi, H., Collins, J. H., and Korn, E. D. (1978) J. Biol. Chem. 253, 6292-6300) had shown that phosphorylation of the heavy chain of Acanthamoeba myosin IA is required for actin activation of its Mg2+-ATPase activity and that, like the phosphorylation site, the catalytic site and the actin binding site are also on the heavy chain. We now show that limited digestion of phosphorylated myosin IA by subtilisin allows separation of the catalytically active peptide fragment from the phosphorylated peptide without any significant loss of actin-activated Mg2+-ATPase activity. A proteolytic fragment with full actin-activated Mg2+-ATPase activity has also been isolated from subtilisin digests of nonphosphorylated myosin IA, which, before proteolysis, did not have actin-activated Mg2+-ATPase activity. The simplest interpretation of these data is that, in its nonphosphorylated state, the phosphorylation site of Acanthamoeba myosin IA inhibits the catalytic site and that this inhibition can be reversed either by phosphorylation of the site or by proteolytically separating it from the catalytic site. Alternatively, phosphorylation and proteolysis may, by unrelated mechanisms, induce similar conformational changes in the myosin heavy chain that lead to activation of its actomyosin ATPase activity.

Direct photoaffinity labeling by nucleotides of the apparent catalytic site on the heavy chains of smooth muscle and Acanthamoeba myosins.

The heavy chains of Acanthamoeba myosins. IA, IB and II, turkey gizzard myosin, and rabbit skeletal muscle myosin subfragment-1 were specifically labeled by radioactive ATP, ADP, and UTP, each of which is a substrate or product of myosin ATPase activity, when irradiated with UV light at 0 degrees C. With UTP, as much as 0.45 mol/mol of Acanthamoeba myosin IA heavy chain and 1 mol/mol of turkey gizzard myosin heavy chain was incorporated. Evidence that the ligands were associated with the catalytic site included the observations that reaction occurred only with nucleotides that are substrates or products of the ATPase activity; that the reaction was blocked by pyrophosphate which is an inhibitor of the ATPase activity; that ATP was bound as ADP; and that label was probably restricted to a single peptide following limited subtilisin proteolysis of labeled Acanthamoeba myosin IA heavy chain and extensive cleavage with CNBr and trypsin of labeled turkey gizzard myosin heavy chain.