5G Cellular Networks Research Articles

An Applied Analysis of Securing 5G/6G Core Networks with Post-Quantum Key Encapsulation Methods

Fifth Generation (5G) cellular networks have been adopted worldwide since the rollout began around 2019. It brought with it many innovations and new services, such as Enhanced Mobile Broadband (eMBB), Ultra Reliable and Low-Latency Communications (URLLC), and Massive Internet of Things (mIoT). Furthermore, 5G introduced a more scalable approach to network operations using fully software-based Virtualized Network Functions (VNF) in Core Networks (CN) rather than the prior hardware-based approach. However, while this shift towards a fully software-based system design provides numerous significant benefits, such as increased interoperability, scalability, and cost-effectiveness, it also brings with it an increased cybersecurity risk. Security is crucial to maintaining trust between vendors, operators, and consumers. Cyberattacks are rapidly increasing in number and sophistication, and we are seeing a shift towards zero-trust approaches. This means that even communications between VNFs inside a 5G core must be scrutinized and hardened against attacks, especially with the advent of quantum computers. The National Institute of Standards and Technology (NIST), over the past 10 years, has led efforts to standardize post-quantum cryptography (PQC) to protect against quantum attacks. This paper covers a custom implementation of the open-source free5GC CN, to expand its HTTPS capabilities for VNFs by introducing PQC Key Encapsulation Methods (KEM) for Transport Layer Security (TLS) v1.3. This paper provides the details of this integration with a focus on the latency of different PQC KEMs in initial handshakes between VNFs, on packet size, and the implications in a 5G environment. This work also conducts a security comparison between the PQC-equipped free5GC and other open-source 5G CNs. The presented results indicate a negligible increase in UE connection setup duration and a small increase in connection setup data requirements, strongly indicating that PQC KEM’s benefits far outweigh any downsides when integrated into 5G and 6G core services. To the best of our knowledge, this is the first work incorporating PQC into an open-source 5G core. Furthermore, the results from this effort demonstrate that employing PQC ciphers for securing VNF communications results in only a negligible impact on latency and bandwidth usage, thus demonstrating significant benefits to 5G cybersecurity.

Initial experience with a 5G cellular network and robotic arm-based remote echocardiographic system in an all-comers setting

Abstract Background Echocardiography is the test-of-choice for the initial evaluation of many cardiac diseases and requires expertise that is often limited in rural area. Robotic arm-assisted remote echocardigram has been attampted for teleconsultation but was limited to heart failure patients(ref), primarily due to the network delay in telecommunication and the subsequent incoordination in robotic arm control. Purpose We aim to assess the feasibility and diagnostic accuracy of a 5G cellular network and robotic arm-based remote echocardiographic system in an all-comers setting. Methods 51 pts were enrolled from the outpatient cardiology clinic of our institute. All pts underwent standard comprehensive echocardiography on a 5G cellular network and robotic arm-based remote echocardiographic system (the robotic part was deployed at our hospital and the control part was located at another campus 20 kilometers away) (Figure 1)and a conventional echocardiographic platform (at our hospital) successively. The order in which patients were examined on the remote and conventional instruments was randomly determined. There was no interval between the two examinations, and examinations of the same patient were performed by experienced but different cardiologists, who were blinded to each other’s diagnosis. The doctor who used the remote system was also randomly allocated and had not been previously specifically trained. The exams were real-time and diagnoses were made right after the exams. Results Of the 51 pts, the image quality was sufficient for diagnosis in 50 patients (48% female, 40±18 years). 1 pt was excluded because some key views could not be obtained using the remote system (98% of exams successful). 17 pts had positive findings, including 10 with a primary diagnosis of valvulopathy (1 Barlow's syndrome, 1 bicuspid aortic valve and 8 less-than-moderate regurgitation), 2 cardiac surgery follow-ups (1 case of aortic valve replacement and septal myectomy, and 1 case of mitral valve replacement and tricuspid annuloplasty), and 2 hypertrophic cardiomyopathy (including 1 case of obstruction at papillary muscle level), 2 with abnormal left ventricular wall motion(including 1 case of apical mural thrombus) (Figure 2), and 1 with congenital heart disease (secumdum atrial septal defect). The main diagnosis was consistent in 98% of cases (papillary muscle level obstruction was missed in one case), using conventional echocardiographic findings as the standard. Time for image acquision using remote echocardiography was significantly longer than conventional one (24 minutes 36 seconds ± 4 minutes 52 seconds vs. 16 minutes 15 seconds ± 1 minute 54 seconds, p<0.0001, paired t-test). Conclusions Comprehensive echocardiographic exam with a 5G cellular network and robotic arm-based remote system is feasible with relatively good diagnostic accuracy.Figure 1Figure 2

Maximizing energy efficiency in HetNets through centralized and distributed sleep strategies under QoS constraint

This research addresses the critical need to optimize the Energy Efficiency (EE) for Ultra-Dense HetNets amid the ever-increasing demands for high-speed data networks. The rapid increase in high-speed devices highlights the urgent necessity for a transformative change in upcoming 5G cellular networks. According to Ericsson's 2022 report, mobile data traffic volume is expected to double by 2027, with mobile video traffic anticipated to rise by nearly 30% each year. In response to these challenges, researchers have identified essential technologies that facilitate 5G networks, including massive Multiple-input-Multiple-output (m-MIMO) systems and HetNets. Although both promise enhanced coverage and throughput, HetNets emerges as a cost-effective solution, surpassing m-MIMO in implementation cost and coverage. However, achieving maximum EE in HetNets necessitates careful consideration of various constraints, including delay, coverage probability, and Signal-to-Interference-plus-Noise Ratio (SINR) thresholds. This research marks a significant milestone in adopting the Distributed Dynamic Opportunistic Sleep Strategy (D-DOSS) approach. The D-DOSS method organizes small clusters throughout the network and evaluates key Quality of Service (QoS) parameters including Energy Utilization Efficiency (EUE), Coverage Probability, Data Throughput, and Success Probability using Monte Carlo simulations. This research analyzes Distributed Sleep (DS) and Centralized Schemes (CS) concerning given QoS parameters. While DS methodologies often exhibit performance trade-offs compared to CS, they provide significant advantages in terms of ease of implementation and management. CS, though representing the most commonly used method in ultra-dense HetNets involves high computational costs that complicate its management. By integrating the D-DOSS and addressing various constraints, this research not only advances HetNet technologies but also makes a significant contribution to optimizing EE while preserving network performance and QoS. The innovative D-DOSS approach offers a promising solution to the challenges of energy efficiency in wireless communication networks and paves the way for future advancements in HetNet deployments. The results and analysis show that D-DOSS effectively addresses the limitations of DS and outperforms existing CS techniques.

Exploit Vulnerabilities in 4G and 5G Cellular Access Network

Portable gadgets back different specialized highlights and administrations for up-and-coming 2G, 3G, 4G and 5G systems. For illustration, these determinations contain physical layer rate sorts, radio convention data, security calculations, carrier conglomeration groups, and benefit sorts such as GSM-R, Voice over LTE, Within the setting of portable security standardization, these organize determinations and administrations are alluded to as gadget capabilities and are traded with the organize amid the gadget enrolment stage. In this article, we investigate data around indicated gadget capabilities for 4G and 5G gadgets and their part in building up a secure interface between the gadget and the arrange. Our inquire about comes about appear the plausibility of the gadget being traded with the carrier some time recently the confirmation step without any ensures and not affirmed by the carrier. Therefore, we display three unused sorts of assaults that misuse data approximately the capabilities of unprotected gadgets in future 5G systems: Character assaults, sending assaults, and battery deplete assaults against versatile gadgets. Conduct verification of concept assaults utilizing reasonable equipment and computer program arrangements to survey their effect on commercial 4G gadgets and systems. We have detailed the distinguished vulnerabilities to pertinent benchmarks bodies and given countermeasures to relieve assaults against gadget capabilities in up-and-coming 5G systems.

An AKA protocol for 5G-assisted D2D communication in Out-of-Coverage scenario

5G-assisted Device to Device (D2D) communication can be broadly categorized into three use case scenarios: In Coverage, Relay Coverage, and Out-of Coverage. The main challenge lies in ensuring secure communication in Out-of Coverage scenarios, as in this situation, neither of the two devices is within the 5G network’s coverage area. Although several researchers have developed authentication mechanisms for securing D2D communication, most are unsuitable for Out-of Coverage scenarios. Additionally, many of these mechanisms cannot withstand free-riding attacks due to the absence of a trusted entity. In a 5G cellular network, a trust relationship can be established between a registered device and the home network through mutual authentication whenever the former is within the latter’s coverage area. Leveraging this trust, this paper proposes a lightweight 5G-assisted authentication protocol for mutual authentication between two communicating devices in Out-of Coverage scenarios. The proposed protocol meets the necessary security goals and mitigates various security attacks, including free-riding attacks. The correctness of the proposed protocol is formally established using the Scyther tool and Random Oracle Model. Furthermore, performance analysis shows that the protocol is efficient in terms of computation overhead, communication overhead and energy consumption compared to similar works in the literature. The computation overhead is found to be 596.12 ms for the Requestor device and 587.26 ms for the Requestee device. The communication overhead is 2720 bits and the total energy consumption for both devices combined is found to be 3016.93 millijoules.

Deployment options of AI components for network resource management in 5G‐enabled agile industrial production cell

SummaryOn‐demand manufacturing in Industry 4.0 requires flexibility of the networks which can be provided with the fifth generation (5G) of mobile communications wireless connectivity. A key component in the efficient utilization of the radio resources in a manufacturing scenario is network resource management (NRM). We show how NRM can be automated with artificial intelligence (AI). We introduce several futuristic industrial use cases that require AI in various parts of the process. We analyze the AI components' benefits and disadvantages in several deployment scenarios. The findings can be used by business stakeholders interested in deploying the 5G cellular wireless network to choose the best NRM and AI implementation strategy for a particular use case. We show that there are many viable options for the AI component in the process automation, but the cost of AI has to be considered in all cases. Also, we point out that an essential component, the standardized information flow on the status of the productivity key performance indicators (KPIs), is needed for the successful deployment and application of the 5G AI.

Optimized deep learning‐based channel estimation for pilot contamination in a massive multiple‐input‐multiple‐output‐non‐orthogonal multiple access system

SummaryOne of the advanced field in 5G cellular networks is the Massive Multiple‐Input‐Multiple‐Output (MIMO), which creates a massive antenna array by offering numerous antennas at the destination. This grows as a hot research topic in the wireless sectors as it enhances the volume and spectrum usage of the channel. The spectral efficiency (SE) is maximized using the abundant antennas employed by MIMO using spatial multiplexing of consumers, which needs precise channel state information (CSI). The SE is affected by both pilot overhead and pilot contamination. To mitigate the contamination and to estimate the suitable channel for communication, an efficient strategy is introduced using the proposed Namib Beetle Aquila optimization (NBAO)_Deep Q network (DQN). Here, the optimal pilot location is identified by employing NBAO, which is an integration of Namib beetle optimization (NBO) and Aquila optimizer (AO). Moreover, DQN is introduced to determine the suitable channel and metrics, such as bit error rate (BER) and normalized mean square error (MSE) is used for evaluation. The normalized MSE channel estimation is utilized to mitigate the effects of pilot contamination. Additionally, designed NBAO + DQN have attained a value of 0.0006 and 0.0005 for BER and normalized MSE.

Priority-based subcarrier allocation algorithm for maximal network connectivity in 5G networks

With the widespread adoption of wireless technology, there has been a significant surge in the number of devices seeking wireless connectivity over the past decade. To meet the extensive demand for high-data-rate wireless connectivity, the fifth-generation (5G) cellular network plays a pivotal role. 5G cellular network aims to support a large number of applications with ultra-high data rates by maximizing device connectivity while satisfying quality of service (QoS) requirements. In this paper, we present an innovative priority-based subcarrier allocation (PSA) algorithm to address the challenge of maximizing connectivity in 5G new radio (5G NR) networks. Initially, we formulate the connectivity maximization problem as a subcarrier allocation problem by considering three key parameters: bandwidth requirement, waiting time, and energy level of user devices. The objective of the formulated problem is to optimally allocate subcarriers to multiple users in order to maximize connectivity while maintaining QoS requirements. To address the problem, we propose the PSA algorithm that prioritizes bandwidth, waiting time, and energy parameters using the R-method. To accommodate the network scenarios, we develop three variants of the PSA algorithm—PSA-1, PSA-2, and PSA-3. These variants allocate subcarriers based on the priority-based score of user. We carried out a simulation-based study to illustrate the effectiveness of our proposed algorithm in comparison to traditional methods. The simulation results reveal that our proposed algorithms outperform first come first serve (FCFS) and longest remaining time first (LRTF), and achieves comparable or superior results compared to priority and fairness-based resource allocation with 5G new radio numerology (PFRA-0N) in terms of the number of user allocations, average user allocation ratio, user drop ratios and average connectivity rate. Compared to the shortest job first (SJF) technique, our proposed PSA algorithm performance is slightly inferior in terms of the number of user allocations, average allocation ratio and average connectivity rate; however, it shows superior performance in drop ratios. Further, the proposed algorithms show significant improvements in execution time compared to the optimal exhaustive search solution.

Fine Tuning of the BitCover Algorithm for Interactive VoD Streaming over 5G Cellular Networks

Fine Tuning of the BitCover Algorithm for Interactive VoD Streaming over 5G Cellular Networks

Performance Impact of Nested Congestion Control on Transport-Layer Multipath Tunneling

Multipath wireless access aims to seamlessly aggregate multiple access networks to increase data rates and decrease latency. It is currently being standardized through the ATSSS architectural framework as part of the fifth-generation (5G) cellular networks. However, facilitating efficient multi-access communication in next-generation wireless networks poses several challenges due to the complex interplay between congestion control (CC) and packet scheduling. Given that enhanced ATSSS steering functions for traffic splitting advocate the utilization of multi-access tunnels using congestion-controlled multipath network protocols between user equipment and a proxy, addressing the issue of nested CC becomes imperative. In this paper, we evaluate the impact of such nested congestion control loops on throughput over multi-access tunnels using the recently introduced Multipath DCCP (MP-DCCP) tunneling framework. We evaluate different combinations of endpoint and tunnel CC algorithms, including BBR, BBRv2, CUBIC, and NewReno. Using the Cheapest Path First scheduler, we quantify and analyze the impact of the following on the performance of tunnel-based multipath: (1) the location of the multi-access proxy relative to the user; (2) the bottleneck buffer size, and (3) the choice of the congestion control algorithms. Furthermore, our findings demonstrate the superior performance of BBRv2 as a tunnel CC algorithm.

Formal dependability analysis of fault tolerant Virtual Machine allocation strategies in Cloud Radio Access Network

Cloud Radio Access Network (C-RAN) has been proposed as a fifth generation (5G) cellular network that is designed to physically separate the Baseband Units (BBUs) from the Remote Radio Heads (RRHs). The BBUs are placed in the BBU pool/hotel, while the RRHs are located in the cells. This separation enables sharing baseband processing resources among RRHs by generating Virtual Machines (VMs) in the BBU pool, leading to radio coordination and energy saving opportunities. Nevertheless, the failure of a BBU can affect several RRHs, causing outages in the radio network. Therefore, designing a reliable and resilient C-RAN is essential to provide high availability and service continuity in case of BBU failure. This paper deals with using formal verification techniques to analyze the performance and the dependability of C-RAN architecture. We propose fault tolerant VM allocation strategies that can handle BBU failures, thus improving the system’s overall reliability. Based on redundancy techniques, these strategies ensure call recovery through migration to functional BBUs in the case of a BBU failure. In order to evaluate the mutual impact of performance measures on the system’s dependability, we develop performability (combination of performance and dependability) Markov Reward Models (MRMs) for the proposed strategies. We use Probabilistic Model Checking (PMC) to check the performability requirements written with Continuous Stochastic Reward Logic (CSRL). The proposed models are implemented and checked using the PRISM model checker, which supports solving MRMs and checking CSRL properties.

The Past, Present, and Future of the Internet: A Statistical, Technical, and Functional Comparison of Wired/Wireless Fixed/Mobile Internet

This paper examines the quantitative and qualitative situation of the current fixed and mobile Internet and its expected future. It provides a detailed insight into the past, present, and future of the Internet along with the development of technology and the problems that have arisen in accessing and using broadband Internet. First, the number of users and penetration rate of the Internet, the various types of services in different countries, the ranking of countries in terms of the mean and median download and upload Internet data speeds, Internet data volume, and number and location of data centers in the world are presented. The second task introduces and details twelve performance evaluation metrics for broadband Internet access. Third, different wired and wireless Internet technologies are introduced and compared based on data rate, coverage, type of infrastructure, and their advantages and disadvantages. Based on the technical and functional criteria, in the fourth work, two popular wired and wireless Internet platforms, one based on optical fiber and the other based on the 5G cellular network, are compared in the world in general and Australia in particular. Moreover, this paper has a look at Starlink as the latest satellite Internet candidate, especially for rural and remote areas. The fifth task outlines the latest technologies and emerging broadband Internet-based services and applications in the spotlight. Sixthly, it focuses on three problems in the future Internet in the world, namely the digital divide due to the different qualities of available Internet and new Internet-based services and applications of emerging technologies, the impact of the Internet on social interactions, and hacking and insecurity on the Internet. Finally, some solutions to these problems are proposed.

Optimization of Quality of Service in 5G Cellular Network by Focusing on Interference Management

Optimization of Quality of Service in 5G Cellular Network by Focusing on Interference Management

Weighted Robust Tensor Principal Component Analysis for the Recovery of Complex Corrupted Data in a 5G-Enabled Internet of Things

Technological developments coupled with socioeconomic changes are driving a rapid transformation of the fifth-generation (5G) cellular network landscape. This evolution has led to versatile applications with fast data-transfer capabilities. The integration of 5G with wireless sensor networks (WSNs) has rendered the Internet of Things (IoTs) crucial for measurement and sensing. Although 5G-enabled IoTs are vital, they face challenges in data integrity, such as mixed noise, outliers, and missing values, owing to various transmission issues. Traditional methods such as the tensor robust principal component analysis (TRPCA) have limitations in preserving essential data. This study introduces an enhanced approach, the weighted robust tensor principal component analysis (WRTPCA), combined with weighted tensor completion (WTC). The new method enhances data recovery using tensor singular value decomposition (t-SVD) to separate regular and abnormal data, preserve significant components, and robustly address complex data corruption issues, such as mixed noise, outliers, and missing data, with the globally optimal solution determined through the alternating direction method of multipliers (ADMM). Our study is the first to address complex corruption in multivariate data using the WTRPCA. The proposed approach outperforms current techniques. In all corrupted scenarios, the normalized mean absolute error (NMAE) of the proposed method is typically less than 0.2, demonstrating strong performance even in the most challenging conditions in which other models struggle. This highlights the effectiveness of the proposed approach in real-world 5G-enabled IoTs.

Developing Laboratory Experiments to teach Undergraduate Engineering Students Multi-User Massive MIMO Technology for 5G Cellular Networks

An effective method of facilitating student learning in a laboratory environment is “practice by doing”. The study of modules related to signal-processing for digital communications requires deep mathematical and theoretical foundations but the practice goal is not really emphasized in the undergraduate curriculum at the University of Mauritius. This causes the students to lose interest in the corresponding modules resulting in high rate of failures. In this work, we propose to develop laboratory experiments with a view to bridge the gap between theoretical and practical aspects in the field of Massive Multiple-Input Multiple-Output (MIMO) systems for 5G cellular networks. Various laboratory scenarios are set up that consider a Maximum Ratio Combining (MRC) receiver in the uplink with an uncorrelated Rayleigh fading channel. Moreover, from a signal processing perspective to enhance the student’s understanding, we analyze the efficiency and error performance of Massive MIMO systems with MPSK and MQAM modulation schemes as well as perfect and imperfect channel estimates. The leading industry software package MATLAB R2022 is used to develop all laboratory experiments and the codes are elaborated in this analysis. Data collected from the experiments are used to generate spectral efficiency and error performance curves which can be used for future research. The findings underscore the significance of accounting for both scenarios and illuminate promising avenues for future research in the realm of massive MIMO education and learning. The assimilation of MATLAB® flowcharts for each MRC receiver, MPSK, and MQAM with perfect and imperfect Channel State Information (CSI) adds further depth to the study, ensuring a comprehensive understanding of the intricacies of massive MIMO systems. Ultimately, this contribution helps in the nurturing of expertise such that future generations of wireless communication pioneers can be inspired.

An Analytical Reliability Performance Assessment of Cell-Free Massive MIMO Systems for 5G and Beyond Cellular Networks

In today‟s realm, the 5G cellular networks offer a new era of fully digital environment by connecting people anywhere anytime. This era requires inspiring demands to the networks in terms of spectral and energy efficiencies, low-latency and ultra-reliable communications. A major development to deal with these unparalleled demands is the introduction of Cell- Free Massive MIMO (CF mMIMO) systems to the cellular network. In recent years, mathematical foundations have been laid for a CF mMIMO communication system to evaluate the spectral and energy efficiencies given the number of access points. Various existing literatures have adopted mathematical models to formulate closed-form expressions for these efficiencies using uncorrelated Rayleigh fading for simple linear processing detectors. In this paper, we try to address a compelling and interesting question which has not received much attention lately. The question is how to evaluate the reliability of a connected user terminal in both a CF mMIMO and conventional mMIMO system? We answer this question by first analyzing the signal models for both systems assuming exact channel estimates and consider an uncorrelated Rayleigh fading channel model. The exact Bit Error Rate, as a reliability assessment, in closed-form are then derived based on strong mathematical foundations, which are simple to numerically evaluate in Matlab R2022, for MPSK and MQAM modulation schemes. The mathematical models presented in this work can be used in 5G and Beyond 5G networks to evaluate the distributions of error rates for a user given the number of Access points or Base Station antennas and modulation scheme. Machine Learning algorithms can be applied to the analytical expressions with a view to predict the error performance of a user terminal given the fading characteristic of the propagation environmen

A Kalman Filter Based Low Complexity Throughput Prediction Algorithm for 5G Cellular Networks

A Kalman Filter Based Low Complexity Throughput Prediction Algorithm for 5G Cellular Networks

5G interference with aviation altimeters: technology and policy recommendations for coexistence

The fifth generation (5G) cellular network roll-out provides high-speed performance, better coverage, and ubiquitous connectivity for the next-generation of intelligent communication systems. Compared to earlier versions, the new 5G wireless standard operates across a wider range of frequencies, which has raised aviation industry's concerns regarding safety and compatibility. For example, 5G systems operating with frequencies that are adjacent those used by radio altimeters could disrupt flight operations and navigation functions. This paper provides an overview of current research efforts assessing the 5G interference and its potential operational impact on altimeters. The work discusses the current stance of regulators and telecommunications operators worldwide on potential 5G interference with altimeters. The paper also compares the ongoing public consultations with key stakeholders globally regarding cellular systems' interference with altimeters. This work offers technical and policy recommendations to spectrum regulators and aviation authorities to inform the safe and efficient deployment of 5G spectra. This work identifies long-term solutions for achieving maximum 5G bands usability and ensuring compatibility among cellular technologies and aviation systems.

Analysis and emulation of proposed testbed for OFDMA 4G and 5G cellular networks

AbstractIn order to investigate and analyze the behavior of 4G and 5G OFDMA cellular networks in real time, it is essential to have a real‐time testbed to emulate these cellular networks. We developed the experimental testbed in this work and proposed a real‐time approach to emulating these networks. We take real‐time measurements in indoor and outdoor environments. From the results, we say the proposed testbed can be used to identify the activity of spectrum occupancy of 4G and 5G cellular systems within a specified time, and one can also test their algorithm, protocols, and solutions using our developed testbed.

Performance Evaluation and Analysis of Urban-Suburban 5G Cellular Networks

5G is the fifth-generation technology standard for the new generation of cellular networks. Combining 5G and millimeter waves (mmWave) gives tremendous capacity and even lower latency, allowing you to fully enjoy the 5G experience. 5G is the successor to the fourth generation (4G) which provides high-speed networks to support traffic capacity, higher throughput, and network efficiency as well as supporting massive applications, especially internet-of-things (IoT) and machine-to-machine areas. Therefore, performance evaluation and analysis of such systems is a critical research task that needs to be conducted by researchers. In this paper, a new model structure of an urban-suburban environment in a 5G network formed of seven cells with a central urban cell (Hot spot) surrounded by six suburban cells is introduced. With the proposed model, the end-user can have continuous connectivity under different propagation environments. Based on the suggested model, the related capacity bounds are derived and the performance of 5G network is studied via a simulation considering different parameters that affect the performance such as the non-orthogonality factor, the load concentration in both urban and suburban areas, the height of the mobile, the height of the base station, the radius, and the distance between base stations. Blocking probability and bandwidth utilization are the main two performance measures that are studied, however, the effect of the above parameters on the system capacity is also introduced. The provided numerical results that are based on a network-level call admission control algorithm reveal the fact that the investigated parameters have a major influence on the network performance. Therefore, the outcome of this research can be a very useful tool to be considered by mobile operators in the network planning of 5G.