4-substituted Pyridines Research Articles

Access to 1-Azabicyclo[2.1.1]hexanes as Potential Bioisosteres for 3-Substituted Pyridines

Access to 1-Azabicyclo[2.1.1]hexanes as Potential Bioisosteres for 3-Substituted Pyridines

Synthesis of the Dimeric Diarylheptanoids Alpinidinoid C and Officinine B Enabled by Blue-Light-Mediated Triple-Minisci-Type Alkylation.

The first syntheses of the Alpinia officinarum natural products alpinidinoid C and officinine B are reported. These unusual dimeric diarylheptanoids were accessed from a 3-substituted pyridine intermediate via a blue-light-mediated, triple-Minisci-type alkylation. Very few reports utilize N-(acyloxy)phthalimides (NAPs) in the construction of natural products, and the syntheses reported herein highlight the power of this methodology toward the orthogonal construction of highly substituted arenes.

Influence of Donor-Acceptor Interactions on MLCT Hole Reconfiguration in {Ru(bpy)} Chromophores.

In MLCT chromophores, internal conversion (IC) in the form of hole reconfiguration pathways (HR) is a major source of dissipation of the absorbed photon energy. Therefore, it is desirable to minimize their impact in energy conversion schemes by slowing them down. According to previous findings on {Ru(bpy)} chromophores, donor-acceptor interactions between the Ru ion and the ligand scaffold might allow to control HR/IC rates. Here, a series of [Ru(tpm)(bpy)(R-py)]2+ chromophores, where tpm is tris(1-pyrazolyl)methane, bpy is 2,2'-bipyridine and R-py is a 4-substituted pyridine, were prepared and fully characterized employing electrochemistry, spectroelectrochemistry, steady-state absorption/emission spectroscopy and electronic structure computations based on DFT/TD-DFT. Their excited-state decay was monitored using nanosecond and femtosecond transient absorption spectroscopy. HR/IC lifetimes as slow as 568 ps were obtained in DMSO at room temperature, twice as slow as in the reference species [Ru(tpm)(bpy)(NCS)]+.

Pyridine substitution strategy for one-dimensional perovskite: Toward efficient and stable mixed-dimensional photovoltaics

Surface passivation via one-dimensional (1D) perovskite has emerged as a promising method to suppress trap states and enhance charge extraction and transportation, leading to improved efficiency and long-term stability. Ionic liquid engineering, characterized as environmental-green additive, has shown particular promise in this regard. Herein, we explore the influence of the electronegativity and dipole moment of two different ionic liquids, benzamidine hydrochloride (BZ) and 2-amidinopyridine hydrochloride (2AP), on the formation of 1D perovskite and the performance of resulting devices. An effective passivation 1D layer has been formed through post-treatment, resulting in nano-rod crystal modified morphology with effectively passivated defects at grain boundaries, enhanced hydrophobicity, prolonged charge carrier lifetime, tailored energy level, and decreased trap density. Notably, the perovskite film treated with 2AP exhibited superior performance due to its stronger interaction with 3D perovskite and better passivation ability on defects originating from the presence of a pyridine ring. As a result, the PSCs incorporating 2AP achieved a champion power conversion efficiency of 24.55 % and retain 90 % of their initial efficiency after storage for over 1000 h at room temperature under ∼ 50 % RH conditions without encapsulation. This study provides valuable insights for expanding the selection of ionic liquids applied in 1D perovskite-assisted surface passivation towards efficient and stable photovoltaics.

Electrochemical ammonia oxidation catalyzed by ruthenium complexes: investigation of substituent effect of axial pyridine ligands

Abstract We have examined catalytic ammonia oxidation using ruthenium complexes bearing 2,2′-bipyridine-6,6′-dicarboxylate ligand and axial 3- and 4-substituted pyridine ligands under electrochemical conditions to study the substituent effect of the axial pyridine ligands. Ruthenium complex bearing 3,4-dibromopyridine ligands shows the highest catalytic activity to produce up to 145 equivalents of dinitrogen based on the catalyst.

Mexidol, Cytoflavin, and succinic acid derivatives as antihypoxic, anti-ischemic metabolic modulators, and ergogenic aids in athletes and consideration of their potential as performance enhancing drugs.

Emoxypine (ethylmethylhydroxypyridine) is a synthetic derivative of vitamin B6 . Emoxypine succinate is a registered drug in Russia and Ukraine under various trade names including Mexidol, Mexicor, and Armadin Long. Mexidol demonstrates antihypoxic and anti-ischemic effects and also modulates metabolism. The use of Mexidol by Russian athletes has been confirmed in the past. Current use by athletes is unknown as this drug is not monitored or included in drug testing protocol. Metabotropic and antihypoxic effects of Mexidol were compared to the effects of meldonium or trimetazidine, both of which are included on the World Anti-Doping Agency (WADA) Prohibited List in category S4.4. Metabolic Modulators. The conjugation of emoxypine with succinate elevates the therapeutic effectiveness of the Mexidol formulation as succinic acid itself has important impacts to consider despite being a common food additive and drug excipient. Other succinic acid salts like ammonium succinate, found as dietary supplement, have been patented as performance enhancers. Available research on healthy subjects suggests that combinations of selected 3-substituted pyridine derivatives with succinate including Mexidol and a related drug Cytoflavin can enhance the performance of athletes. Cytoflavin is a multi-component formula containing meglumine sodium succinate, nicotinamide (vitamin B3 ), inosine (riboxin), and riboflavin. Other related succinate-based drugs include Remaxol, Reamberin, and Cogitum. Mexidol and Cytoflavin and related substances exhibit similar biological effects as drugs on the WADA Prohibited List, and if they are used for performance enhancement by athletes, they could be worthy of consideration as prohibited substances in sport.

Cu-Catalyzed Direct Asymmetric Mannich Reaction of 2-Alkylazaarenes and Isatin-Derived Ketimines.

The first direct catalytic asymmetric Mannich reaction of 2-alkylazaarenes and ketimines was realized with a chiral Cu-bis(oxazoline) complex as the catalyst. The asymmetric addition of 2-alkylpyridines to isatin-derived ketimines proceeded smoothly to afford α,β-functionalized 2-substituted pyridines bearing 3-amino-3,3-disubstituted oxindole motifs with excellent results (≤99% yield, 99:1 dr, and 98% ee). The catalytic system was also extended to 2-alkylbenzothiazoles as nucleophiles for the asymmetric Mannich reaction of ketimines.

The Impact of ortho-substituents on Bonding in Silver(I) and Halogen(I) Complexes of 2-Mono- and 2,6-Disubstituted Pyridines: An In-Depth Experimental and Theoretical Study.

The coordination nature of 2-mono- and 2,6-disubstituted pyridines with electron-withdrawing halogen and electron-donating methyl groups for [N-X-N]+ (X=I, Br) complexations have been studied using 15 N NMR, X-ray crystallography, and Density Functional Theory (DFT) calculations. The 15 N NMR chemical shifts reveal iodine(I) and bromine(I) prefer to form complexes with 2-substituted pyridines and only 2,6-dimethylpyridine. The crystalline halogen(I) complexes of 2-substituted pyridines were characterized by using X-ray diffraction analysis, but 2,6-dihalopyridines were unable to form stable crystalline halogen(I) complexes due to the lower nucleophilicity of the pyridinic nitrogen. In contrast, the halogen(I) complexes of 2,6-dimethylpyridine, which has a more basic nitrogen, are characterized by X-crystallography, which complements the 15 N NMR studies. DFT calculations reveal that the bond energies for iodine(I) complexes vary between -291 and -351 kJ mol-1 and for bromine between -370 and -427 kJ mol-1 . The bond energies of halogen(I) complexes of 2-halopyridines with more nucleophilic nitrogen are 66-76 kJ mol-1 larger than those of analogous 2,6-dihalopyridines with less nucleophilic nitrogen. The experimental and DFT results show that the electronic influence of ortho-halogen substituents on pyridinic nitrogen leads to a completely different preference for the coordination bonding of halogen(I) ions, providing new insights into bonding in halogen(I) chemistry.

Ortho-Substituent Effects on Halogen Bond Geometry for N-Haloimide⋯2-Substituted Pyridine Complexes.

The nature of (imide)N-X⋯N(pyridine) halogen-bonded complexes formed by six N-haloimides and sixteen 2-substituted pyridines are studied using X-ray crystallography (68 crystal structures), Density Functional Theory (DFT)(86 complexation energies), and NMR spectroscopy (90 association constants). Strong halogen bond (XB) donors such as N-iodosuccinimide form only 1:1 haloimide:pyridine crystalline complexes, but even stronger N-iodosaccharin forms 1:1 haloimide:pyridine and three other distinct complexes. In 1:1 haloimide:pyridine crystalline complexes, the haloimide's N─X bond exhibits an unusual bond bending feature that is larger for stronger N-haloimides. DFT complexation energies (ΔEXB ) for iodoimide-pyridine complexes range from -44 to -99kJmol-1 , while for N-bromoimide-pyridine, they are between -31 and -77kJmol-1 . The ΔEXB of I⋯N XBs in 1:1 iodosaccharin:pyridine complexes are the largest of their kind, but they are substantially smaller than those in [bis(saccharinato)iodine(I)]pyridinium salts (-576kJmol-1 ), formed by N-iodosaccharin and pyridines. The NMR association constants and ΔEXB energies of 1:1 haloimide:pyridine complexes do not correlate as these complexes in solution are heavily influenced by secondary interactions, which DFT studies do not account for. Association constants follow the σ-hole strengths of N-haloimides, which agree with DFT and crystallography data. The haloimide:2-(N,N-dimethylamino)pyridine complex undergoes a halogenation reaction resulting in 5-iodo-2-dimethylaminopyridine.

The molecular structure of 4-substituted pyridine N-oxides–boron trifluoride triel bonded complexes: Peculiarities and regularities

Pyridine N-oxides are widely used in medicine, organic synthesis and design of functional coordination compounds and supramolecular systems. However, at present, issues related to the complex formation and stereochemistry of pyridine N-oxide molecular complexes as well as the nature of the complexing bond and the substituent effect remain relevant. In this paper the substituent effect on geometric, electronic, thermodynamic and spectral properties was established by quantum chemical calculations (DFT/M062-X/aug-cc-pvTZ) for the series of 4-substituted pyridine N-oxides with boron trifluoride as model complexes. Theoretical insights into the nature of OB triel bond was considered in terms of QTAIM and NBO analysis. A conformational analysis has been performed to resolve the contradictions in the literature data concerning the stereochemistry of such complexes. The calculated structural parameters, as well as complex formation energy, binding energy, thermodynamic characteristics, vibrational frequencies and chemical shifts reveal high correlation with the empirical Hammett substituent constants.

Iodine(I) and Silver(I) Complexes Incorporating 3-Substituted Pyridines.

Building upon the first report of a 3-acetaminopyridine-based iodine(I) complex (1b) and its unexpected reactivity toward tBuOMe, several new 3-substituted iodine(I) complexes (2b-5b) have been synthesized. The iodine(I) complexes were synthesized from their analogous silver(I) complexes (2a-5a) via a silver(I) to iodine(I) cation exchange reaction, incorporating functionally related substituents as 3-acetaminopyridine in 1b; 3-acetylpyridine (3-Acpy; 2), 3-aminopyridine (3-NH2py; 3), and 3-dimethylaminopyridine (3-NMe2py; 4), as well as the strongly electron-withdrawing 3-cyanopyridine (3-CNpy; 5), to probe the possible limitations of iodine(I) complex formation. The individual properties of these rare examples of iodine(I) complexes incorporating 3-substituted pyridines are also compared to each other and contrasted to their 4-substituted counterparts which are more prevalent in the literature. While the reactivity of 1b toward etheric solvents could not be reproduced in any of the functionally related analogues synthesized herein, the reactivity of 1b was further expanded to a second etheric solvent. Reaction of bis(3-acetaminopyridine)iodine(I) (1b) and iPr2O gave [3-acetamido-1-(3-iodo-2-methylpentan-2-yl)pyridin-1-ium]PF6 (1d), which demonstrated potentially useful C-C and C-I bond formation under ambient conditions.

Design and synthesis of 2,6-dihalogenated stilbene derivatives as potential anti-inflammatory and antitumor agents

In present study, three series of 2,6-dihalogenated stilbene derivatives were designed, synthesized, and assayed for anti-inflammatory and cytotoxic activities. All 62 compounds showed potential anti-inflammatory activity in zebrafish model in vivo, and the installation of halogens and pyridines led to significant improved effects. Among them, DHS2u and DHS3u with the substitution of pyridine showed more higher effects than positive drug indomethacin at 20 μM with inhibitory rate of 94.59% and 90.54%, respectively. Besides, DHS3g bearing 2,5-dimethoxy exhibited potent cytotoxic activity against K562 cells with IC50 values 3.12 μM along with a suitable selectivity on normal cell viability. These results showed that 2,6-dihalogenated stilbenes could serve as a bright starting point for the further development as anti-inflammatory and antitumor agents.

Site-Isolated Main-Group Tris(2-pyridyl)borate Complexes by Pyridine Substitution and Their Ring-Opening Polymerization Catalysis

Tris(2-pyridyl)borates are an emerging class of scorpionate ligands, distinguished as exceptionally robust and electron-donating. However, the rapid formation of inert homoleptic complexes with divalent metals has so far limited their catalytic utility. We report site-isolating tris(2-pyridyl)borate ligands, bearing isopropyl, tert-butyl, and mesityl substituents at the pyridine 6-position to suppress the formation of inert homoleptic complexes. These ligands form the first 1:1 complexes between tris(2-pyridyl)borates and Mg2+, Zn2+, or Ca2+, with isopropyl-substituted TpyiPrH showing the most generality. Single-crystal X-ray diffraction analysis of the resulting complexes and comparison to density functional theory (DFT) models showed geometric distortions driven by steric repulsion between the pyridine 6-substituents and the hexamethyldisilazide (HMDS-, -N(SiMe3)2) anion. We show that this steric profile is a feature of the six-membered pyridine ring and contrasts with more established tris(pyrazolyl)borate and tris(imidazoline)borate scorpionate complexes. TpyiPrMg(HMDS) (1) and its zinc analogue are moderately active for the controlled polymerization of l-lactide, ε-caprolactone, and trimethylene carbonate. Furthermore, 1 gives controlled polymerization under more demanding melt-phase polymerization conditions at 100 °C, and block copolymerization of ε-caprolactone and trimethylene carbonate. These results will enable useful catalysis and coordination chemistry studies with tris(2-pyridyl)borates, and characterizes their structural complementarity to more familiar scorpionate ligands.

Substituent Effects in π-Hole Regium Bonding Interactions Between Au(p-X-Py)2 Complexes and Lewis Bases: An ab initio Study.

Long range substituent effects in regium bonding interactions involving Au(I) linear complexes are investigated for the first time. The Au(I) atom is coordinated to two para-substituted pyridine ligands. The interaction energy (RI-MP2/def2-TZVP level of theory) of the π-hole regium bonding assemblies is affected by the pyridine substitution. The Hammett's plot representations for several sets of Lewis bases have been carried out and, in all cases, good regression plots have been obtained (interaction energies vs. Hammett's σ parameter). The Bader's theory of "atoms-in-molecules" has been used to evidence that the electron density computed at the bond critical point that connects the Au-atom to the electron donor can be used as a measure of bond order in regium bonding. Several X-ray structures retrieved from the Cambridge Structural Database (CSD) provide experimental support to the existence of π-hole regium bonding in [Au(Py)2 ]+ derivatives.

Iodine(i) complexes incorporating sterically bulky 2-substituted pyridines.

The silver(i) and iodine(i) complexes of the 2-substituted pyridines 2-(diphenylmethyl)pyridine (1) and 2-(1,1-diphenylethyl)pyridine (2), along with their potential protonated side products, were synthesised to investigate the steric limitations of iodine(i) complex formation. The complexes were characterised by 1H and 1H–15N HMBC NMR, X-ray crystallography, and DFT calculations. The solid-state structures for the silver(i) and iodine(i) complexes were extensively compared to the literature and analysed by DFT to examine the influence of the sterically bulky pyridines and their anions.

NH4I-Catalyzed Formal [4+2] Cycloaddition of α,β-Unsaturated O-Acetyl Oxime with Alkyl Pyruvate for Rapid Substituted Pyridine Formation

NH4I-Catalyzed Formal [4+2] Cycloaddition of α,β-Unsaturated O-Acetyl Oxime with Alkyl Pyruvate for Rapid Substituted Pyridine Formation

Dual Gold/Silver Catalysis: Indolizines from 2-Substituted Pyridine Derivatives via a Tandem C(sp3)-H Alkynylation/Iminoauration.

A dual gold/silver-catalyzed cascade C(sp3)-H alkynylation/iminoauration of 2-substituted pyridines with hypervalent iodine(III) reagents for the synthesis of indolizines is described. This novel reaction involves the formation of an alkynyl Au(III) species, a dual gold/silver-catalyzed C(sp3)-H functionalization, and a subsequent iminoauration process. A number of indolizines bearing diverse functionalities were prepared in good to excellent yield. Furthermore, a gram-scale reaction was efficiently conducted.

Rapid Access to 3-Substituted Pyridines and Carbolines via a Domino, Copper-free, Palladium-Catalyzed Sonogashira Cross-Coupling/6π-Aza Cyclization Sequence.

Herein, we report a one-pot, three-component method for the preparation of 3-substituted pyridines and carbolines via copper-free, palladium-catalyzed Sonogashira cross-coupling with aryl iodides, followed by 6π-aza cyclization. This arylation cross-coupling/annulation cascade provides easy access to substituted, fused pyridines from readily available substrates in good yields (67-92%) with complete selectivity.

Dual Solution-/Solid-State Emissive Excited-State Intramolecular Proton Transfer (ESIPT) Dyes: A Combined Experimental and Theoretical Approach.

Excited-state intramolecular proton transfer (ESIPT) dyes typically show strong solid-state emission, but faint fluorescence intensity is observed in the solution state owing to detrimental molecular motions. This article investigates the influence of direct (hetero)arylation on the optical properties of 2-(2'-hydroxyphenyl)benzoxazole ESIPT emitters. The synthesis of two series of ESIPT emitters bearing substituted neutral or charged aryl, thiophene, or pyridine rings is reported herein along with full photophysical studies in solution and solid states, demonstrating the dual solution-/solid-state emission behavior. Depending on the nature of substitution, several excited-state dynamics are observed: quantitative or partially frustrated ESIPT process or deprotonation of the excited species. Protonation studies revealed that pyridine substitution triggered a strong increase of quantum yield in the solution state for the protonated species owing to favorable quinoidal stabilization. These attractive features led to the development of a second series of dyes with alkyl or aryl pyridinium moieties showing strong tunable solution/solid fluorescence intensity. For each series, ab initio calculations helped rationalize and ascertain their behavior in the excited state and the nature of the emission observed by the experimental results.

Nature and Strength of the π‐Hole Chalcogen Bonded Complexes between Substituted Pyridines and SO3 Molecule

AbstractA theoretical study has been carried out on the π‐hole based chalcogen bonding interaction between SO3 and various pyridines (XC5H4N), at the MP2=full/aug‐cc‐pVTZ level, to obtain a better insight into the nature and strength of N…S bond. Our calculations predict two different types of chalcogen bonded complexes: (1) Type‐A complex is formed via lone pair‐ π‐hole (N…S) interaction, and (2) Type‐B complex is stabilized through π‐hole‐π‐electron interaction. The binding energy of the Type‐A complexes varies between −109.78 and ‐81.56 kJ/mol whereas it ranges between −28.93 and −17.82 kJ/mol for Type‐B complexes. The nature of the N…S bond and the changes in its properties on the influence of electron donating and electron withdrawing substituents have been discussed with the help of various computational tools like AIM, NCI, SAPT and NBO analysis. The binding energy of the Type‐A complexes are found to correlate with the basicity parameters such as PA and Vs,min of the substituted pyridines. The binding energies of the pyridine complexes with SF2, SO2, CS2 and OCS are also computed for finding the effect of variation of Vs,max value of the S‐atom on the binding energy. The 2nd order hyperconjugation interaction energy between LP(N) and σ*(S−O)/LP*(S) is well correlated to the binding energy as: −ΔE=0.11E(2) −20.08. The variation in the bond distances and their corresponding vibrational frequencies of both the interacting partners (XC5H4N and SO3) are discussed in detail.