1H Double-quantum Research Articles

Solid-state NMR of vulcanized natural rubber/butadiene rubber blends: Local organization and cross-linking heterogeneities

Elastomer blends, among which natural rubber (NR) and butadiene rubber (BR), are involved in many components of the automotive/tire industry. A comprehensive understanding of their mechanical behavior requires, among other features, a detailed description of the cross-link density in these mixtures. In the case of vulcanized immiscible blends, the distribution of the cross-link density within each of the NR- and BR-rich domains is key information, but difficult to determine using the conventional approaches used for one-component cross-linked elastomers. In this study, the vulcanization within NR/BR blends is investigated using a robust 1H double-quantum (DQ) MAS recoupling experiment, BaBa-xy16. Two kinds of cross-linked NR/BR blends were considered with two different microstructures for the BR component. The bulk organization of the resulting blends was first probed by analyzing the 1H spin-lattice relaxation behavior. In a second step, BaBa-xy16 was used to investigate, in a selective way, the cross-link heterogeneities within NR/BR blends. In particular, for immiscible NR/BR mixtures, the distribution of the cross-link density between both phases was compared and the observed differences were discussed.

Time domain NMR evaluation of thermal and thermochemical aging of nitrile rubber on crosslinking and mechanical properties

This study investigates the impact of aging on nitrile rubber (NBR) compositions under thermal and thermochemical aging conditions. The effects of aging were assessed using the 1H Double Quantum Time Domain NMR (DQ-NMR) technique, providing molecular-scale insights into average cross-link density, spatial heterogeneity, and network inelastic defects. The aging's influence on the macroscopic mechanical properties of NBR, including hardness, elongation, and stress at break, known to be closely related to cross-linking, was examined. It was observed that temperature-induced aging affected NBR differently based on the acrylonitrile content and solvent absorption capacity. 1H Double Quantum Time Domain NMR provided evidence of increasing heterogeneous cross-linking, which created a denser network structure. The changes in mechanical properties during aging were consistent with the NMR analyses, providing valuable insights for understanding, customizing, and predicting the service life of a specific O-Ring based NBR formulation.

Operando characterisation of the products of Fischer-Tropsch synthesis in a fixed-bed reactor studied by magnetic resonance

Operando measurement of catalyst performance presents many difficulties as it is necessary to obtain measurements at reaction temperature and pressure and also at relevant length scales of multiple pellets to replicate the pellet-scale mass transport. Non-invasive measurement under such conditions is challenging. In this study we have developed an NMR/MRI compatible reactor that is of industrially-relevant scale and can operate at typical conditions for Fischer-Tropsch synthesis (FTS). The pilot-scale fixed-bed reactor (20 mm i.d.) used for FTS is operated at 220 °C and 37 bar and is packed with 1 wt % Ru/TiO2 catalyst pellets. Multiple magnetic resonance techniques have been developed and applied to achieve quantitative characterisation of product species including hydrocarbons, water, oxygenates and branched alkanes in pores. In addition to spatially-resolved measurements of molecular diffusion coefficients of the product species from which the carbon chain length of the saturated hydrocarbons can be determined, preliminary estimates of the relative amount of oxygenate and water species and branched saturated hydrocarbons present within the pore space of the catalyst are also determined using non spatially-resolved two-dimensional 1H T1-chemical shift and two-dimensional 1H double quantum filtered correlated spectroscopy (DQF-COSY), respectively. The concentrations of water and oxygenates detected inside the pores of catalyst pellets decrease when the feed H2/CO ratio decreases. The amount and extent of branching of saturated hydrocarbon species is observed to be higher than for the effluent wax product, most likely due to the effect of mass transfer limitation within the reactor. This work demonstrates that a toolbox of operando magnetic resonance techniques is available to characterise different product species of FTS from within catalyst pellets. The information provided by these techniques can give insight into how both catalyst and reactor can be optimised.

Influence of network structure determined by Time-domain [formula omitted] Double Quantum NMR on the creep properties of non-stoichiometric epoxy-amine resins aimed for chemical anchoring applications

Chemical anchors, used to fasten structural components, are prone to creep under sustained loading, which significantly affects their long-term performance and service life. In this study, the molar ratio, that determines the ultimate network structure of an epoxy-amine resin system, is systematically modified to investigate the creep properties. The percentage of physical entanglement and defects (free and dangling chains) for each formulation is obtained by Time-Domain 1H Double Quantum (DQ) Nuclear Magnetic Resonance (NMR) measurements. The crosslink density values from the dynamic mechanical analysis (DMA) and the network parameter from the NMR measurements show a strong linear correlation. Tensile tests were performed to determine the influence on the mechanical properties and set the load levels for tensile creep measurements of the selected formulations. Epoxy-rich systems (Epoxy-Amine adduct) show the highest modulus and tensile strength but inferior creep properties compared to stoichiometric and amine-rich (Amine-Epoxy adduct) compositions. This can be attributed to the build-up of several network structures with higher content of free and dangling chains leading to lower deformation resistance. At high loads, the entanglement density has an increasing impact on the creep behavior compared to defect-rich systems. Modeling using the Findley approach was carried out to link the obtained creep parameter with the material properties. Therefore, this work aims to deepen the understanding of the molecular-scale structures of epoxy resins required for material and design optimization, by investigating the correlation between network structure and creep properties.

Mapping Hydrogens in Hydrous Materials

Hydrous materials such as clays, cements, hydroxyapatite, and metal hydroxides have been known and extensively used since antiquity. However, experimental elucidation of hydrogen in hydrous materials remains challenging due to the intrinsic insensitivity, limited accessibility, sample damage, or poor spectral resolution of many characterization methods. 1H solid-state NMR spectroscopy has evolved into an ideal site-specific characterization tool of hydrogen-containing materials, but its current application in hydrous materials is hampered by the low resolution of 1H NMR spectra in the solid state due to the presence of intense dipolar coupling networks and a narrow 1H chemical shift range. Herein, a significant advance in the characterization of hydrogens in hydrous materials is reported. A combination of magic-angle spinning (MAS) NMR, moderate 2H substitution, and high magnetic fields has unlocked the capacity of identifying many chemically similar while crystallographically distinct hydrogen sites in a prototypical hydrous material Y4(OH)10Br2·3H2O (LYH-Br) by 1D 1H solid-state NMR experiments. 1H NMR peaks were first tentatively assigned in accordance with the density functional theory (DFT) calculation results, and the assignment was further refined by 2D 1H–89Y heteronuclear correlation (HETCOR) and 1H–1H double-quantum (DQ) MAS NMR data. The order of 1H chemical shift (δiso) values provides valuable information on the relative strength of hydrogen bond for ten hydroxide hydrogen sites. The power of very high spectral resolution is further described by observing all triple-quantum (TQ) coherences in the 2D 1H–1H TQ MAS NMR spectrum, in which all spatial proximities among three hydrogen sites are resolved. This demonstration of the very high spectral resolution obtained in 1D and 2D 1H solid-state NMR experiments illustrates how scientists in various communities can now study the multiple hydrous species of hydrous materials and obtain previously inaccessible fine structural information.

Chain Dynamics of Partially Disentangled UHMWPE around Melting Point Characterized by 1H Low-Field Solid-State NMR.

Melts of ultrahigh molecular weight polyethylene (UHMWPE) entangled significantly, suffering processing difficulty. In this work, we prepared partially disentangled UHMWPE by freeze-extracting, exploring the corresponding enchantment of chain mobility. Fully refocused 1H free induction decay (FID) was used to capture the difference in chain segmental mobility during the melting of UHMWPE with different degrees of entanglement by low-field solid-state NMR. The longer the polyethylene (PE) chain is in a less-entangled state, the harder the process of merging into mobile parts after detaching from crystalline lamella during melting. 1H double quantum (DQ) NMR was further used to obtain information caused by residual dipolar interaction. Before melting, the DQ peak appeared earlier in intramolecular-nucleated PE than in intermolecular-nucleated PE because of the strong constraints of crystals in the former one. During melting, less-entangled UHMWPE could keep disentangled while less-entangled high density polyethylene (HDPE) could not. Unfortunately, no noticeable difference was found in DQ experiments between PE melts with different degrees of entanglement after melting. It was ascribed to the small contribution of entanglements compared with total residual dipolar interaction in melts. Overall, less-entangled UHMWPE could reserve its disentangled state around the melting point long enough to achieve a better way of processing.

Zwitterionic or Not? Fast and Reliable Structure Determination by Combining Crystal Structure Prediction and Solid-State NMR.

When it comes to crystal structure determination, computational approaches such as Crystal Structure Prediction (CSP) have gained more and more attention since they offer some insight on how atoms and molecules are packed in the solid state, starting from only very basic information without diffraction data. Furthermore, it is well known that the coupling of CSP with solid-state NMR (SSNMR) greatly enhances the performance and the accuracy of the predictive method, leading to the so-called CSP-NMR crystallography (CSP-NMRX). In this paper, we present the successful application of CSP-NMRX to determine the crystal structure of three structural isomers of pyridine dicarboxylic acid, namely quinolinic, dipicolinic and dinicotinic acids, which can be in a zwitterionic form, or not, in the solid state. In a first step, mono- and bidimensional SSNMR spectra, i.e., 1H Magic-Angle Spinning (MAS), 13C and 15N Cross Polarisation Magic-Angle Spinning (CPMAS), 1H Double Quantum (DQ) MAS, 1H-13C HETeronuclear CORrelation (HETCOR), were used to determine the correct molecular structure (i.e., zwitterionic or not) and the local molecular arrangement; at the end, the RMSEs between experimental and computed 1H and 13C chemical shifts allowed the selection of the correct predicted structure for each system. Interestingly, while quinolinic and dipicolinic acids are zwitterionic and non-zwitterionic, respectively, in the solid state, dinicotinic acid exhibits in its crystal structure a "zwitterionic-non-zwitterionic continuum state" in which the proton is shared between the carboxylic moiety and the pyridinic nitrogen. Very refined SSNMR experiments were carried out, i.e., 14N-1H Phase-Modulated (PM) pulse and Rotational-Echo Saturation-Pulse Double-Resonance (RESPDOR), to provide an accurate N-H distance value confirming the hybrid nature of the molecule. The CSP-NMRX method showed a remarkable match between the selected structures and the experimental ones. The correct molecular input provided by SSNMR reduced the number of CSP calculations to be performed, leading to different predicted structures, while RMSEs provided an independent parameter with respect to the computed energy for the selection of the best candidate.

Disorder to order: how halide mixing in MAPbI3-xBrx perovskites restricts MA dynamics.

Mixed-halide lead perovskites are of particular interest for the design of tandem solar cells currently reaching record efficiencies. While halide phase segregation upon illumination of mixed perovskites is extensively studied, the effect of halide disorder on A cation dynamics is not well understood, despite its importance for charge carrier diffusion and lifetime. Here, we study the methylammonium (MA) reorientational dynamics in mixed halide MAPbI3-xBrx perovskites by a combined approach of experimental solid-state NMR spectroscopy and molecular dynamics (MD) simulations based on machine-learning force-fields (MLFF). 207Pb NMR spectra indicate the halides are randomly distributed over their lattice positions, whereas PXRD measurements show that all mixed MAPbI3-xBrx samples are cubic. The experimental 14N spectra and 1H double-quantum (DQ) NMR data reveal anisotropic MA reorientations depending on the halide composition and thus associated disorder in the inorganic sublattice. MD calculations allow us to correlate these experimental results to restrictions of MA dynamics due to preferred MA orientations in their local Pb8I12-nBrn "cages". Based on the experimental and simulated results, we develop a phenomenological model that correlates the 1H dipolar coupling and thus the MA dynamics with the local composition and reproduces the experimental data over the whole composition range. We show that the dominant interaction between the MA cations and the Pb-X lattice that influences the cation dynamics is the local electrostatic potential being inhomogeneous in mixed halide systems. As such, we generate a fundamental understanding of the predominant interaction between the MA cations and the inorganic sublattice, as well as MA dynamics in asymmetric halide coordinations.

ACCELERATED HEAT AGING OF BUTYL AND BROMOBUTYL AIRCRAFT INNER TUBES FOR SHELF LIFE DETERMINATION

ABSTRACT Butyl and bromobutyl inner tubes, specified by the Aerospace Standard AS50141 for military aircraft, were thermally aged from 40 to 120 °C for varying lengths of time and then their hardness and mechanical properties were measured. 1H double quantum nuclear magnetic resonance (DQ NMR) was used to elucidate crosslink density and distribution changes. Time–temperature superposition of the aged data coupled with the Arrhenius approach was used to determine an approximate shelf life. High (80–120 °C) and low (40–80 °C) temperature oxidation processes were occurring for both rubbers. Below 80 °C, an increase in crosslink density, hardening, stiffening, and loss of elongation was observed. Plasticizer and volatile loss contributes to compound stiffening. Sulfur crosslink network modifications during thermal aging can explain ultimate property loss and stiffness increase. Diffusion limited oxidation was taking place above 80 °C, with the development of a thin oxidized layer composed of ionic crosslinking that affected both hardness and mechanical properties. For butyl rubber, the hardness rise stabilizes as do the ultimate properties, likely due to the proliferation of chain scission reactions, whereas crosslinking reactions prevailed over chain scission events for bromobutyl rubber. Crosslink density and defect fractions B and C as measured through DQ NMR were in agreement with the physical property testing results. The degree of heterogeneity of the network as perceived visually through DQ NMR regularization increases upon exposure to higher temperatures and longer aging times due to the broadening of the crosslink density distribution. Similar Arrhenius activation energies were calculated for the low and high temperature oxidation process for butyl and bromobutyl rubbers. The projected shelf life for the butyl and bromobutyl inner tubes was 10 and 20 yr, respectively. For the first time, DQ NMR testing results (crosslink density and its distribution, defect level) have been successfully applied to support a shelf life determination.

Heteronuclear-filtered 1H homonuclear multi-quantum correlation experiment at 100 kHz magic-angle spinning

Remarkable advances in fast magic-angle spinning (MAS) techniques significantly improve the resolution of 1H solid-state nuclear magnetic resonance (NMR) spectra. Here, we introduce a heteronuclear-filtered 1H homonuclear multi-quantum (MQ) correlation strategy available at a MAS rate of 100 kHz by combining 1H{X} heteronuclear-filtered methods and 1H homonuclear MQ correlation experiments. The proposed strategy was applied to selectively extract 1H signals of aluminum lactate (Al-Lac) in a mixture of Al-Lac and zinc lactate (Zn-Lac) using 27Al-filtered methods (i.e., 1H{27Al} heteronuclear multiple quantum correlation (HMQC) or 1H{27Al} symmetry-based resonance-echo saturation-pulse double-resonance (S-RESPDOR)). We demonstrate that incorporating these 27Al-filtered methods into two-dimensional (2D) 1H–1H double-quantum (DQ)/single-quantum (SQ), triple-quantum (TQ)/SQ, and even three-dimensional (3D) 27Al/1H(DQ)/1H(SQ) experiments can facilitate the acquisition of spectra without signal overlap and targeted characterization of the 1H species surrounding 27Al sites. The proposed strategy is considered to efficiently extract key structural information from complex spin systems.

Unexpected Role of Short Chains in Entangled Polymer Networks.

The knowledge of chain entanglement is key to our understanding of the relation between the viscoelastic properties of polymeric material and their microscopic structure and dynamics. This work conducted a detailed study on the role of short chains in the entangled polymer network. A series of poly(ethylene oxide) (PEO) mixtures with bimodal molecular weight distribution were selected for this study. 1H double-quantum (DQ) NMR combined with the rheology measurement was used to investigate the entangled polymer network. We found that short-chain polymers have the potential to significantly alter the entangled polymer network formed by long-chain polymers. Additionally, both the amount of chain ends and the size of the short-chain polymer were found to have clear disentanglement influences on the entangled polymer network. Moreover, adding low molecular weight PEO to the entangle framework formed by the high molecular weight PEO, resulted in the formation of inhomogeneous entangled polymer networks. The effect of low molecular weight polymers on the entangled polymer networks in PEO melts provides a perspective on the molecular level effect of molecular weight distribution (MWD) on entanglement polymer networks.

Probing the Dynamic Structural Evolution of End-Functionalized Polybutadiene/Organo-Clay Nanocomposite Gels before and after Yielding by Nonlinear Rheology and 1H Double-Quantum NMR.

Understanding the structural evolution process after the yielding of networks in polymer nanocomposites can provide significant insights into the design and fabrication of high-performance nanocomposites. In this work, using hydroxyl-terminated 1,4-polybutadiene (HTPB)/organo-clay nanocomposite gel as a model, we explored the yielding and recovery process of a polymer network. Linear rheology results revealed the formation of a nanocomposite gel with a house-of-cards structure due to the fully exfoliated 6 to 8 wt% organo-clays. Within this range, nonlinear rheologic experiments were introduced to yield the gel network, and the corresponding recovery processes were monitored. It was found that the main driving force of network reconstruction was the polymer–clay interaction, and the rotation of clay sheets played an important role in arousing stress overshoots. By proton double-quantum (1H DQ) NMR spectroscopy, residual dipolar coupling and its distribution contributed by HTPB segments anchored on clay sheets were extracted to unveil the physical network information. During the yielding process of a house-of-cards network, e.g., 8 wt% organo-clay, nearly one-fourth of physical cross-linking was broken. Based on the rheology and 1H DQ NMR results, a tentative model was proposed to illustrate the yielding and recovery of the network in HTPB/organo-clay nanocomposite gel.

Supramolecular Synthon Identification in Azelaic Acid – Isonicotinamide

Supramolecular synthons are the smallest structural units that contain the information inherent in building large molecular assemblies. Here, we apply solid-state NMR methods for the identification of the synthon in a cocrystal of Azelaic acid [(CH2)7(COOH)2]– Isonicotinamide [C6H6N2O]. It is observed that the spin-lattice relaxation time of protons in the cocrystal is long, implying that the choice of experiments, particularly those that involve low-sensitivity nuclei, could be time consuming. It is noticed that the two dimensional 1H double quantum (DQ) – 1H single quantum (SQ) correlation experiment at very fast MAS (60 kHz) is able to provide information on proton-proton proximities that leads to an understanding of the synthon structure. Experiments such as the CP-Reverse CP and 1H–13C HETCOR have been used to obtain spectral assignment which was additionally confirmed by first-principle GIPAW NMR chemical shift calculations. Present study indicates the basic unit to be a heterosynthon in Azelaic acid (AZA) – Isonicotinamide (INIC) cocrystal formed by two different modes of intermolecular connectivity, viz. acid–pyridine and acid–amide hydrogen bonding interactions. The presence of a CH…O type bond involving a hydrogen of INIC is also indicated from the observation of a larger chemical shift of the corresponding proton. The experimental protocol presented in this paper is expected to be a useful tool for the estimation of the basic structural arrangement of the synthons in a rapid fashion.

Bimodal 1H Double Quantum Build-Up Curves by Fourier and Laplace-like Transforms on Aged Cross-Linked Natural Rubber.

The 1H DQ Fourier and Laplace-like spectra for a series of cross-linked natural rubber (NR) samples naturally aged during six years are presented and characterized. The DQ build-up curves of these samples present two peaks which cannot be described by classical functions. The DQ Fourier spectra can be obtained after a numeric procedure which introduces a correction time which depends less on the chosen approximation, spin-½ and isolated CH2 and CH3 functional groups. The DQ Fourier spectra are well described by the distributions of the residual dipolar coupling correlated with the distribution of the end-to-end vector of the polymer network, and with the second and fourth van Vleck moments. The deconvolution of DQ Fourier spectra with a sum of four Gaussian variates show that the center and the width of Gaussian functions increase linearly with the increase in the cross-link density. The Laplace-like spectra for the natural aged NR DQ build-up curves are presented. The centers of four Gaussian distributions obtained via both methods are consistent. The differences between the Fourier and Laplace-like spectra consist mainly of the spectral resolution in the favor of Laplace-like spectra. The last one was used to discuss the effect of natural aging for cross-linked NR.

Spectroscopic Signatures of MQ-Resins in Silicone Elastomers

Polysiloxane elastomers have a large application space due to their versatile cross-linking chemistry and highly tunable physical and mechanical properties. One approach for improving the mechanical integrity of commercial polysiloxane “silicone” elastomers while maintaining their optical transparency is the addition of small, silicone-resin molecules to the network. However, both the poly(dimethylsiloxane) (PDMS) network and the silicone-resin particles have an amorphous structure and complex chemistry, which makes the characterization of their structural properties and segmental network dynamics difficult. Here, we report the synthesis and characterization of a series of model silicone networks modified with a specific class of silicone-resin known as MQ-resin using Raman and advanced nuclear magnetic resonance (NMR) spectroscopy methods. Raman spectroscopy was successfully used to quantify the contribution of the MQ-resin to the network, to determine the type of MQ-resin present in the network, and to investigate the completeness of the network cross-linking reaction. Solid-state and 1H double-quantum (DQ) NMR spectroscopies were used not only as a detection method for the MQ-resins but also to quantify changes in the segmental dynamics of the network as a function of MQ-resin concentration. The combination of Raman and NMR spectroscopies describes a series of samples where the MQ-resin particles and PDMS chains maintain their independent segmental dynamics up to high concentrations of MQ-resins (40–50% MQ), where the physical properties of the resin dominate the physical properties of the overall network. The results from our spectroscopic analyses are consistent with the results from macroscopic characterization techniques such as solvent uptake and mechanical testing. The spectroscopic insights into the structure–property relationships of PDMS-MQ composites presented in this study are a valuable tool not only for the synthesis and reverse engineering of future generations of commercial silicone elastomers but also for understanding the mechanisms of aging and degradation over the material lifetime.

Polymer Networks Synthesized from Poly(Sorbitol Adipate) and Functionalized Poly(Ethylene Glycol).

Polymer networks were prepared by Steglich esterification using poly(sorbitol adipate) (PSA) and poly(sorbitol adipate)-graft-poly(ethylene glycol) mono methyl ether (PSA-g-mPEG12) copolymer. Utilizing multi-hydroxyl functionalities of PSA, poly(ethylene glycol) (PEG) was first grafted onto a PSA backbone. Then the cross-linking of PSA or PSA-g-mPEG12 was carried out with disuccinyl PEG of different molar masses (Suc-PEGn-Suc). Polymers were characterized through nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). The degree of swelling of networks was investigated through water (D2O) uptake studies, while for detailed examination of their structural dynamics, networks were studied using 13C magic angle spinning NMR (13C MAS NMR) spectroscopy, 1H double quantum NMR (1H DQ NMR) spectroscopy, and 1H pulsed field gradient NMR (1H PFG NMR) spectroscopy. These solid state NMR results revealed that the networks were composed of a two component structure, having different dipolar coupling constants. The diffusion of solvent molecules depended on the degree of swelling that was imparted to the network by the varying chain length of the PEG based cross-linking agent.

Dynamic heterogeneity in homogeneous polymer melts.

Chain entanglement behaviors were studied by 1H Hahn echo nuclear magnetic resonance (NMR) and 1H double-quantum (DQ) NMR experiments. Poly(ethylene oxide) (PEO) was chosen to investigate the chain entanglement behaviors. The 1H Hahn echo NMR results demonstrate that the critical molecular weight of PEO is approximately 6 kg mol-1. Above this critical molecular weight, chain entanglements start to occur in the melts resulting in anisotropic motions of polymer chain. The 1H DQ NMR observations establish that PEO melts with molecular weights above the critical value exhibit dynamical entanglements. The entangled networks, formed by PEO with a molecular weight of 480 kg mol-1 (PEO480), present slow mobility and rather homogeneously distributed chain entanglements, while the entangled networks, formed by PEO with a molecular weight of 255 kg mol-1 (PEO255), present fast mobility and obvious dynamic heterogeneity in the distribution of chain entanglement. Short chain PEOs like that with a molecular weight of 2 kg mol-1 are demonstrated to function like solvents when being added in an appropriate concentration to PEO480, and the dilution effect increases the chain mobility of PEO480. Moreover, properly diluted PEO480 networks exhibit dynamic heterogeneity similar to that observed in PEO255.

ADVANCED CHARACTERIZATION OF RECYCLED RUBBER FROM END-OF-LIFE TIRES

ABSTRACT There are currently many well-established applications for recycled rubber from end-of-life tires (ELT), but it is essential to investigate and seek new approaches to enhance the value of these products. Recent developments in new technologies and innovative recycling and devulcanization processes have opened up new perspectives for ELT crumb rubber. To promote the use of these products in newly added value applications, it is essential to develop and optimize methods that allow the characterization of parameters related to the ultimate properties of potential final applications. In this respect, a novel characterization methodology based on advanced 1H double-quantum (DQ) nuclear magnetic resonance experiments has been applied for the first time to quantify the key parameters that characterize the structure of ELT crumb rubber after diverse recycling processes: from simple mechanical grinding to complex devulcanization methods. This experimental approach enables the quantification of parameters that define the network structure of rubber, such as the nonelastic network defects (sol fraction, dangling chain ends, loops), the cross-link density, and the heterogeneity of the network, directly from rubber granulate and powder (without any additional sample preparation steps), overcoming most of the drawbacks and uncertainties that limit the application of traditional rubber characterization methods (e.g., equilibrium swelling experiments). By applying this experimental approach, it is possible to identify and quantify the actual technical limits for a complete selective devulcanization process of ELT crumb rubber.

Atom-planting synthesis of MCM-36 catalyst to investigate the influence of pore structure and titanium coordination state on epoxidation activity

Abstract The borosilicate ERB-1 was modified as titanosilicate with microporous and mesoporous composite MCM-36 structure accommodated as epoxidation catalyst for large size molecule of reactants in the aqueous solution. Ti-MCM-36 was synthesized by swelling and pillaring the MWW layer structure with SiO2 and atom-planting method with TiCl4. The 2D 1H double quantum NMR and in-situ infrared spectroscopy confirm that the swelling process with cetyltrimethylammonium bromide and tetrapropylammonium hydroxide for the MCM-36 synthesis causes the deboronation of the ERB-1 and formation of hydroxyl nest. During the atom-planting treatment, the TiCl4 reacts with the generated hydroxyl group and consumes the hydroxyl nest to form the tetrahedral titanium in the zeolite framework as Ti–O–Si. The UV–Vis spectra show that the incorporated titanium atoms are mainly existed in the form of tetracoordinated titanium. The titanosilicate pillared Si/Ti-MCM-36 with coexistence of tetrahedral and octahedral coordination titanium species were compared with Ti-MCM-36 to investigate the coordination state of Ti species for the liquid phase epoxidation of cyclohexene, cyclooctene with tert-butyl hydroperoxide aqueous solution, decane solution or H2O2 solution. Moreover, compared with the extra-framework octahedral coordination Ti species, the framework tetrahedral coordination titanium species are more efficient for epoxidation, especially with H2O2 as oxidant. By comparing with the performance of microporous Ti-ERB-1, the microporous and mesoporous composite Ti-MCM-36 is more efficient with the increase of the reactant molecule size from 1-hexene, cyclohexene, cyclooctene and soybean oil, which shows good epoxidation activity for soybean oil within H2O2 solution.

MAS NMR Investigation of Molecular Order in an Ionic Liquid Crystal.

The structure and molecular order in the thermotropic ionic liquid crystal (ILC), [choline][geranate(H)octanoate], an analogue of Choline And GEranate (CAGE), which has potential for use as a broad-spectrum antimicrobial and transdermal and oral delivery agent, were investigated by magic-angle spinning (MAS) nuclear magnetic resonance (NMR), polarizing optical microscopy, small-angle X-ray scattering (SAXS), and mass spectrometry. Mass spectrometry and the 1H NMR chemical shift reveal that CAGE-oct is a dynamic system, with metathesis (the exchange of interacting ions) and hydrogen exchange occurring between hydrogen-bonded/ionic complexes such as [(choline)(geranate)(H)(octanoate)], [(choline)(octanoate)2(H)], and [(choline)(geranate)2(H)]. These clusters, which are shown by mass spectrometry to be significantly more stable than expected for typical electrostatic ion clusters, involve hydrogen bonding between the carboxylic acid, carboxylate, and hydroxyl groups, with rapid hydrogen bond breaking and re-formation observed to average the 1H chemical shifts. The formation of a partial bilayer liquid crystal (LC) phase was identified by SAXS and polarizing optical microscopy at temperatures below ∼293 K. The occurrence of this transition close to room temperature could be utilized as a potential temperature-induced “switch” of the anisotropic properties for particular applications. The presence of an isotropic component of approximately 23% was observed to coexist with the LC phase, as detected by polarizing optical microscopy and quantified by both 1H–13C dipolar-chemical shift correlation (DIPSHIFT) and 1H double-quantum (DQ) MAS NMR experiments. At temperatures above the LC-to-isotropic transition, intermediate-range order (clustering of polar and nonpolar domains), a feature of many ILs, persists. Site-specific order parameters for the LC phase of CAGE-oct were obtained from the MAS NMR measurement of the partially averaged 13C–1H dipolar couplings (DCH) by cross-polarization (CP) build-up curves and DIPSHIFT experiments, and 1H–1H dipolar couplings (DHH) by double-quantum (DQ) build-up curves. The corresponding order parameters, SCH and SHH, are in the range 0–0.2 and are lower compared to those for smectic (i.e., layered) phases of conventional nonionic liquid crystals, resembling those of lamellar phases formed by lyotropic surfactant–solvent systems.