Year
Publisher
Journal
Institution
1
Institution Country
Publication Type
Field Of Study
Topics
Open Access
Language
Filter 1
Year
Publisher
Journal
Institution
1
Institution Country
Publication Type
Field Of Study
Topics
Open Access
Language
Filter 1
Export
Sort by: Relevance
Effect of low and high temperature ECAP modes on the microstructure, mechanical properties and functional fatigue behavior of Ti-Zr-Nb alloy for biomedical applications

A Ti-18Zr-15Nb (at%) shape memory alloy was subjected to a high-temperature thermomechanical treatment (HTMT) combining an equal channel angular pressing (ECAP) at 500 °C for n = 4–8 passes and a short-time post-deformation annealing (PDA) at 600 °C. The phase composition, microstructure, texture, mechanical and functional properties were studied. The functional fatigue behavior observed in this study was compared to that resulted from the reference low-temperature thermomechanical treatment (LTMT) by ECAP at 200 °C for 3 passes + PDA (600 °C for 5 min). The ECAP at 500 °C (n = 4) led to the formation of a highly deformed, dynamically polygonised substructure of β-phase with a crystallographic texture close to the [101] direction. In this state, the alloy exhibited an excellent combination of the static functional and mechanical properties: a relatively high strength (UTS = 670 MPa), a sufficient ductility (δ = 13.3 %), a low Young’s modulus (E < 40 GPa), and a high superelastic recovery strain (εrsemax= 3.1 %). An increase in the number of passes during ECAP to n = 8 led to a greater substructural hardening of the material, grain/subgrain refinement, and the release of α-phase. This significantly increased the alloy strength (UTS = 897 MPa), but reduced its ductility (δ = 5.9 %) and suppressed martensitic transformation. The alloy after both the HTMT (ECAP at 500 °C, n = 4) and TMT (ECAP at 200 °C, n = 3) processes exhibited an equally excellent functional fatigue resistance accompanied by a superior superelastic behavior with small accumulated strains. However, the HTMT process appears to be more technologically advanced, as it eliminates the need for PDA and reduces the risks of specimen cracking during processing.

Read full abstract
Innovative Transformation and Valorisation of Red Mill Scale Waste into Ferroalloys: Carbothermic Reduction in the Presence of Alumina

Primary and secondary mill scales (MSs) are waste products produced by the surface oxidation of steel during the hot (800 to 1200 °C) rolling process in downstream steelmaking. While the primary MS is comprised of FeO, Fe3O4, and Fe2O3 in a range of proportions, the secondary MS primarily contain red ferric oxide (Fe2O3) (red MS). We report a novel route for extracting iron from red MS and transforming it into ferro-aluminium alloys using carbothermic reduction in the presence of alumina. The red MS powder was blended with high-purity alumina (Al2O3) and synthetic graphite (C) in a range of proportions. The carbothermic reduction of red MS-Al2O3-C blends was carried out at 1450 °C and 1550 °C under an argon atmosphere for 30 min and then furnace-cooled. The red MS was completely reduced to iron at these temperatures with reduced iron distributed around the matrix as small droplets. However, the addition of alumina unexpectedly resulted in a significant increase in the number and sizes of iron droplets generated, much higher reactivity, and the formation of ferrous alloys. A small amount of alumina reduction into metallic aluminium was also observed at 1450 °C. There is an urgent need to identify the true potential of industrial waste and the materials within it. This study showed that red MS is a valuable material source that could be transformed into ferro-aluminium alloys. These alloys find application in a range of industrial sectors such as construction, automotive, infrastructure, etc.

Read full abstract
Open Access