Whole Field Measurements to Understand the Role of Varying Depths of Nucleation Site on Vapor Bubble Dynamics and Heat Transfer Rates

Abstract

Abstract This work studies the possible effects of varying depths of cavity on bubbling features and the associated heat transfer rates in nucleate pool boiling regime. A single vapor bubble has been generated on a substrate with a cylindrical cavity at its center that acts as the nucleation site. Experiments have been conducted for three cavity depths (250, 500, and 1000 μm), while keeping its throat diameter constant at 200 μm. With the bulk fluid maintained under saturated conditions, for each cavity depth, surface superheat level has been varied in the range of ΔTsuperheat = 8, 10 and 12 °C. A gradient-based visualization technique, coupled with a high speed camera, has been employed to simultaneously map the changes in thermal gradients during the formation of the vapor bubble as well as bubble dynamic parameters. The image sequence obtained has been qualitatively and quantitatively analyzed to elucidate the dependence of bubbling features and various heat transfer processes on cavity depth. With an increase in the depth of cavity, the net effect of reduction in the available thermal energy due to the increased convection effects and significant depletion of superheated layer are identified as the dominant heat transfer processes that influence the bubbling features. Furthermore, based on the statistics of bubble departure characteristics, the cavity with higher depth (1000 μm) showed a much stable bubble formation with minimal variation in the bubble departure frequency as compared to the bubbling features from a cavity with smaller depth (250 μm). Evaporative heat transfer process has been identified as the primary cause for increased inconsistency of bubbling features at high superheat conditions for experiments performed for low cavity depths.