Abstract

We demonstrate a thermal infrared (IR) detector based on a high quality-factor (Q) whispering gallery mode (WGM) borosilicate glass microspherical shell resonator and investigate its performance to detect IR radiation in 1 – 20 ${\mu }\text{m}$ wavelength range. The resonator exhibits a temperature sensitivity of 1.17 GHz/K with a Q-factor of 3 million and can be configured as a high sensitivity infrared sensor. The microspherical shell IR sensor exhibited a responsivity of 7.88 kHz/nW and achieved a noise-equivalent-power (NEP) of 19 nW/ $\sqrt {Hz}$ experimentally. A laser Doppler vibrometer (LDV) is used to measure the physical expansion of the microspherical glass resonator when IR radiation is absorbed. Based on the experimentally measured diametric expansion of the shell per unit IR power absorbed, the NEP of 19 nW/ $\sqrt {Hz}$ corresponds to a dimensional change of 2 pm which can be resolved using the resonator. Using COMSOL modeling, thermal expansion analysis was performed for the absorbed IR Power. Using these values of dimension change of the microspherical shell, the dependence of resonance frequency shift on absorbed IR power was simulated. These models show that a NEP of 690 pW/ $\sqrt {Hz}$ can be achieved for the microspherical shell with a diameter of 2 mm and a thickness of 2 ${\mu }\text{m}$ .

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.