Abstract
A high gain Fresnel zone plate reflector is presented for helicopter collision avoidance radar at 94 GHz. The antenna system consists of a compact, airtightness and low return loss primary source illuminating a printed reflector with Fresnel plate zone phase correction. In order to increase the overall efficiency, the reflector combines 8 correcting zones in its center and 4 on the border. Reflected phase of over 360deg is achieved by means of circular ring or combined circular and ring patches. The reflector is fabricated using standard photolithographic techniques. The primary source consists of a small FSS made by a double slot array antenna pasted on the aperture of a standard WR-10 waveguide. Antenna measurements were conducted using a compact base arrangement. The antenna performs 37.8 dBi at the center frequency of 94 GHz with a maximum value of the return loss value not exceeding -25 dB. The frequency bandwidth at -3 dB in gain and return loss is of 9%
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
