Waterproofing performance of polypropylene – concrete wall of underground silo under combined compressive stress and water pressure

Abstract

Safe, economical and high-quality storage of huge amount of grain for a longer duration under COVID-19 is a challenge and underground storage is a good alternative due to stable temperature, less cooling consumption and better pest control effect. However, the underground silo has very high requirement of waterproof and the performance of underground silo under combined compression and water pressure was rarely studied. In this study, a new composite structure, polypropylene – concrete wall (PPCW) for underground silo was proposed. Total three PPCWs with different size were manufactured to test the waterproofing features under joint effect of compression and hydropower of water. The strains, lateral displacement and cracking conditions of PPCWs were investigated. According to the experimental results, the PP board and concrete presented very good performance of interaction working under compression. The maximum water pressure of the specimens with stud spacing of 250mm increased by about 15.7% compared with that of the specimens with stud spacing of 350mm. The welding and strength of PP board has the greatest influence on the ultimate performance of PPCW. Based on the empirical coefficient method of concrete flat-slab and tested results, a new modified method was proposed to predict the bending moment at mid-span of PPCW by using an adjustment coefficient, Rm. Considering this experimental case only, the adopting a Rm = 0.64 could control the relative errors between test and analysis under 15.6%.