Abstract
ABSTRACT Knowing the properties of wood-based building materials is essential for their proper use. Moisture transfer properties of building materials are crucial to proper building design and the prevention of moisture-related problems. In selecting materials for the building, it is important to know their water vapour transmission properties. In this research the water vapour transmission properties of uncoated and coated particleboard, oriented strand board (OSB) and birch plywood were studied using wet cup method and a moisture gradient in the samples was additionally measured. The water vapour transmission rate of free films of three commercial transparent coatings was also studied. Results showed that particleboard had the highest water vapour permeability and that the coatings reduced the water vapour permeability of all tested wood-based panels. Moreover, sanding increased the water vapour permeability of uncoated particleboard and OSB. The moisture gradient in all tested wood-based panels was linear. The highest water vapour transmission rate was recorded for acrylic water-borne coating, followed by polyurethane water-borne coating and the lowest for polyurethane solvent-based coating.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
