Water Sorption and Solubility of Highly Aesthetic Single-Shade Nano-Hybrid Resin Composites.

Abstract

Background A single-shade resin composite is a new type of resin composite that was introduced in 2019. There is not much data regarding the water sorption (Wsp) and water solubility (Wsl) of this type of resin composite. Therefore, this study aimed to investigate Wsp and Wsl and their effects on the surface roughness of a single-shade nano-hybrid resin composite in comparison with a conventional nano-hybrid resin composite in accordance with ISO 4049:2019 (Dentistry - Polymer-based Restorative Materials). Material and methods An in vitro study was performed to investigate the Wsp and Wsl of a single-shade supra-nano-hybrid composite (Omnichroma) and a conventional nano-hybrid composite (Filtek™ Z250 XT) in accordance with ISO 4049:2019. Five disks were prepared of each material with dimensions of 15 ± 1 mm in diameter and 1 ± 0.1 mm in thickness, as per ISO 4049:2019. The results were calculated according to the ISO equations for Wsp and Wsl in µg/mm3. Atomic force microscopy (AFM) was used to analyze the surface roughness (Ra) of test specimens. Results The findings showed that the values of Wsl and Wsp of both materials are comparable and revealed no statistically significant difference (P > 0.05). The AFM images showed a higher Ra post-solubility testing, and the statistical analysis indicated a significant difference for both materials. Conclusions The study concluded that the single-shade resin composite (Omnichroma) and the conventional nano-hybrid composite (Filtek™ Z250 XT) are following the requirements of ISO 4049:2019. The AFM analysis indicated that resin composite surfaces are significantly affected when exposed to water for a prolonged period of time. However, the Ra variations of Filtek™ Z250 XT were higher than Omnichroma specimens. These results indicate that resin composite surfaces can be significantly impacted by prolonged water exposure. This knowledge is critical for enhancing the long-term clinical performance and durability of these dental restorative materials.