Waste polyethylene terephthalate-derived organic-inorganic hybrid materials as sustainable dual electrodes for Li-ion batteries

Abstract

The hybrid Fe-Li2TP structure is constructed from waste polyethylene terephthalate (w-PET) derived dilithium terephthalate (Li2TP) and conventional Fe2O3 by hydrothermal reaction. It is being studied for both anode and cathode for LIBs. As an anode, it exhibits a reversible capacity of 505 mAh/g after 100th cycle at 1 C-rate with ∼100 % coulombic efficiency (CE). In addition, as a cathode, it shows highly reversible charge/discharge capacities of 107.50/107.52 mAh/g after the 100th cycle at 0.1 C-rate with 100 % CE. Further, in the cathodic studies via galvanostatic intermittent titration technique (GITT), the average lithium diffusion (DLi+) coefficients are calculated to be 2.96 × 10-10, 3.89 × 1010 cm2 s−1 and the electrical (µ) mobilities to be 5.86 × 1011 m2 V−1 s−1, 1.12 × 1011 m2 V−1 s−1 for charge and discharge pulses, respectively. The combined nano-rod and nano-spherical morphologies reduce the diffusion length, and adding 10 % SWCNTs during electrode fabrication enhances the electronic conductivity. This organic–inorganic hybrid strategy of Fe-Li2TP strongly mitigates the electrode dissolution, reducing the structural strain and preventing electrolyte decomposition at higher voltage. Computational studies show an optimized Fe-Li2TP structure with a 2.7-fold lower band gap value (1.9040 eV) than the pristine Li2TP.