Abstract

The voltage–current characteristics of glow discharges in gas mixture (N2:O2=8:2) at a pressure of 10 Torr were obtained with the discharge current up to 150 A. Parallel-plane electrodes with a diameter of 10.7 cm and a discharge chamber with co-axial geometry were used to produce glow discharge with high current. The glow discharge voltage was almost constant until the whole surface of the cathode was covered with glow, i.e., until the discharge current became 3.7 A in our experimental condition (a normal glow discharge mode). The voltage, however, increased with the current when the glow covered over the cathode (an abnormal glow discharge mode). The electron density in positive column of the high-current glow discharge was obtained to be 3×1011 cm−3 from Langmuir probe measurements.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.