Abstract
We manufactured a wearable particle monitor (WPM), which is a simple and low-cost dust monitor. We aimed to evaluate the usefulness of the device by using it and location information of a Global Navigation Satellite System (GNSS) to measure dust generation in outdoor workplaces. We used nine WPMs and a particle counter KC-52 to measure in parallel the dust concentration diffusing standard particles in a dust exposure apparatus to evaluate the measurability of the WPM, and visualized dust generation in outdoor workplaces to evaluate its usability. We obtained location information using a GNSS in parallel with measuring with the WPM. The measured values of the WPM followed the measured values of the KC-52, with a strong correlation of the values between the KC-52 and each WPM. The discrepancy among devices tended to increase, however, because the measured values of the WPMs increased. For outdoor measurements, we could create a heat map of the relative values of dust generation by combining two data of the WPM and the GNSS. The methods of using the WPM could overview the conditions needed to produce dust emissions in dust-generating workplaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.