Abstract
Abstract Medium dense hardwoods (HWs) show higher tensile strength (TS) values than softwoods (SWs). These advantages cannot be utilised effectively because HW grading is not well developed. The aim of the present paper was to analyse the utilisation potential of European ash (Fraxinus spp.) and maple (Acer spp.) grown in Central Europe, which were graded by different methods. The visual grading characteristics of 869 HW boards were determined and the dynamic modulus of elasticity (MOEdyn) and X-ray attenuation (XRA) were measured by an industrial scanner. The specimens were subsequently tested in tension according to EN 408:2010 and according to German visual grading rules show strength values of 28 MPa and 30 MPa, respectively. Machine strength grading and for a combination of manually assessed boards and MOEdyn give rise to higher strength data. MOEdyn, in particular, results in lamella data with 62 MPa for ash and 42 MPa for maple. There is good agreement with recently presented HW tensile profiles. Machine grading with a multisensor system allows better strength prediction compared to the MOEdyn or visual strength grading. Best performance is achieved by a combined grading approach.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
