Abstract

This paper presents a study on the vibration and noise characteristics of austempered ductile iron (ADI) gears. Running tests for ADI, SCM 415 case-hardened, and SCM 435 normalized gears were carried out under different running conditions by means of a power-absorbing-type gear testing machine, and the circumferential, radial and axial vibration accelerations of the gears, the gear noise, and the root stress were measured. The vibration and noise of the ADI gear were found to be much lower than those of the SCM435 normalized gear due to the larger damping ratio of the ADI. Furthermore, the effects of the finishing method of a gear tooth and the isothermal transformation temperature on the vibration and noise characteristics of ADI gears were determined to a considerable extent.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.