Abstract
The beam structures are considered as one of the most fundamental building elements of technical equipment. Many of the machining tools (for example lathe tool) may be also regarded as the beam structures. The various excitation effects are affecting the machining tools during the machining process. Cutting speeds, cutting forces, chip-making manner, the stiffness of MTW (machine-tool-workpiece) system are predominant effects affecting the dynamics of MTW system and also influencing the machining process (roughness of the machined surface, tool wear, tool or workpiece damage, noise generated by the machining process, etc.). Depending on the excitation effects, the machining tool body (beam structure) must have the required dynamic properties. The modification of beam modal properties based on embedding of inner reinforcing core is presented in this paper. The main aim of the modification is to change the modal properties (mode shapes, natural frequencies) of the beam body.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.