Verification of a 3D CFD model for vertical slot fish-passes

Abstract

In the present work, we verified a 3D computational fluid dynamics model for vertical slot fish-passes (VSFs) that employs the renormalization-group k-epsilon turbulence model (RNG KE) and the volume of fluid (VOF) method. We compared model calculations with experiments in two pool designs T1 and T2 of an experimental VSF and with 2D calculations using the shallow water equations (SWE) and the standard k-epsilon (2D SKE) model. Calculations of the 3D model showed (1) good agreement with experiments and 2D calculations in predicting mean flow velocities, (2) better performance in the determination of the water surface in the VSF, which is attributed to the accurate VOF method, (3) superior prediction of turbulence characteristics than the 2D model, which is due to the 3D RNG KE model that overcomes the problem of turbulence overestimation of the 2D SKE model, and to the fact that the 3D model takes into account the 3D features of the flow in the fish pass. Moreover, the present 3D calculations showed that the common assumptions in VSFs that (1) the flow is 2D, and (2) the simulation of 4 pools of a VSF is sufficient to obtain satisfactory results, are not always valid. Flow can be considered as 2D only in pool design T2 and for certain geometries and flow characteristics in pool design T1; while, eventually, all the pools of a fish pass need to be modeled to ensure accurate results. Finally, the present work illustrates the need to perform fish experiments simultaneously with flow experiments.