Abstract
Decreasing the emissions of CO2 that come from vehicle exhaust, especially in car parking and tunnels, is so vital. CO2 emissions cause corrosion to a reinforcement of concrete. Thus, there is a need to provide a layer that protects the reinforcement from the reach of this harmful gas. This work goals to investigate the efficiency of using board units from Pozzolime concrete and pervious concrete to sequestrate CO2 from the environment and then to convert it into calcium carbonate inside the concrete. The units have dimensions of (200×400×40±5). All specimens were cured in a water tank after about 48 hours after casting. Then paint the sample from all surfaces (three layers) excluding the top surface. The pervious concrete and Pozzolime specimens, at age of 28 days, were put in the chamber, then the gas was supplied to the chamber with concentrations of 15%, 25%, and 50 %, for 24 hours. The efficiency was evaluated through carbonation depth, CO2-uptake, and weight change. The results showed that the maximum CO2 uptake was recorded at the age of 28 days for Pozzolime concrete when exposed to 50% of CO2 concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.