Utilization of 3D printed orthoses for musculoskeletal conditions of the upper extremity: A systematic review

Abstract

Study DesignSystematic Review Introduction3D printed orthoses are emerging as a possible option in the field of hand therapy to fabricate conventional casts and orthoses. It is unknown how this technology is currently being used to treat upper extremity musculoskeletal conditions, and if 3D orthoses are comparable to custom- made low temperature thermoplastic orthoses fabricated by hand therapists. Purpose of the StudyThe primary aim of this review was to investigate the utilization, effectiveness and feasibility of 3D printed technology to manufacture custom orthoses for musculoskeletal conditions of the upper extremity. MethodsStudies describing 3D printed orthoses or casts used in treatment with patients were included following a comprehensive literature search using CINAHL, PubMed, Medline, ProQuest, and EBSCO databases. The selected studies had to address musculoskeletal conditions of the elbow, wrist, hand and/or digits that would typically be immobilized with a cast or brace or orthotic or orthosis. ResultsTen studies met the inclusion criteria. Study designs included case studies, case series, and 1 randomized clinical trial. 3D printed orthoses/casts appear to be comfortable, provide adequate immobilization, and have pleasing aesthetics. However, expensive equipment, lack of appropriate software and scanning tools and lack of highly skilled clinicians are all factors preventing the implementation of 3D printed orthoses into current clinical practice. Discussion3D printed orthoses appear to be effective at immobilization of a limb, aesthetically pleasing, and utilize lightweight and well -ventilated materials. However, the feasibility of implementing 3D printing technology in hand therapy settings remains challenging in part due to the resources required. ConclusionsWhile 3D printing shows promise, the high cost of equipment, lack of training and skill of clinicians and the long time required for production are all factors that need to be improved to make 3D printing a viable option in the hand therapy setting.