Abstract
Possibilities of anaerobic processing of substrates rich in sulphur were studied. High concentrations of sulphur cause problems when contained in biogas, as well as inhibition by sulphides in anaerobic processes. The impact of ferrous chloride on anaerobic processes, directly dosed to the anaerobic reactor was studied. This sulphur removal method is commonly known, though the objective of our study was to identify problems when it is applied on substrates rich in sulphur. Waste biomass from cystine production was used as substrate, which is produced in large quantities (17000 t/y) by Biotika, a.s. Slovenská Ľupča and requires processing; sulphur content range from 4 up to 5 % in the biomass. Specific biogas production was 0.410 m3/kg COD i.e. 0.737 m3/kg VSS, while 77 % sulphide inhibition occurred after several dose repetitions. Inhibition decreased to 25.4 % during long-term processing of cystine biomass in a mixed anaerobic reactor. Ferrous chloride dosing, however, resulted in high excess sludge generation, lower organic content in the sludge and high concentration of dissolved inorganic salts. These factors may lead to secondary problems in long-term processing of cystine biomass.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
