Abstract
This work analyzes the use of sewage sludge, generated in wastewater treatment plants, as an alternative for small aggregate to be used in concrete. Concrete cylindrical specimens with height h = 20 cm and diameter D = 10 cm were prepared using different amounts of sludge in the substitution of fine aggregates. Portland cement (CP II Z 32 RS cement) was used in all concrete mixtures, and two water-cement ratios and four cement-sludge mixtures were investigated. Compressive strength, sclerometer index, ultrasonic wave transmission velocity, and water absorption capillary tests were performed. The results showed that the use of sewage sludge as a replacement for fine aggregate to produce concrete exhibited a positive effect on both its compressive strength and its capillary water absorption. The results, even preliminary ones, demonstrated that the sludge could be used as an effective replacement for fine aggregate to produce concrete. The replacement of fine aggregate with 5% sewage sludge proved to be the optimal replacement value for the type of sewage sludge investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.