Abstract
The surface morphology of joints has a significant effect on the mechanical properties of rock masses. The key morphological indices developed in this study have been used to analyze the joint surface morphology quantitatively, and a new peak shear strength model has also been developed. Firstly, three-dimensional morphology scanning tests have been carried out on seven groups (27 blocks in total) of rock joints with different surface morphologies, and a new functional relationship between the apparent dip angle and the initial contact area ratio has been established: i.e. Aθ∗+=exp−θ∗/θ¯∗n, where Aθ∗+ is the contact area ratio, θ¯∗ is the characteristics angle, and n is a fitting parameter. The average joint height has been used to account for the effect of the joint fluctuation on the surface morphology. Ten standard roughness profiles have been digitalized to compute the roughness indices of each profile and to establish a relationship with the JRC (joint roughness coefficient). The direct shear tests have been carried out. By analyzing the test results, a new peak shear strength model has been developed. Comparing with the results from five classical models, the error between the calculated results of the new model and the experimental results is the smallest. Hence, the new model is a reliable tool for the estimation of the peak shear strength of rock joints.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
