Abstract
Fibers in asphalt concrete are known for enhancing its strength and fatigue characteristics while increasing ductility. Additionally, fibers may increase the dynamic modulus, moisture resistance, creep compliance, rutting and freeze–thaw resistance of asphalt concrete, preventing the formation and propagation of cracks. The addition of fibers may influence the properties of the material, but it is not clear how is this influence, and which are the optimum amount, length and diameter of fibers needed for not having a negative impact on the mixture. For this reason, fibers (steel wool) distribution and their effect on the porosity and electrical conductivity of dense asphalt concrete have been studied. With that purpose, 25 different mixtures, with the same aggregates gradation and amount of bitumen, but with two different lengths of fibers, four different percentages, and four different diameters of steel wool have been built. Results show that long and thin fibers produce many clusters and a poor distribution, while short and thick fibers disperse very well in the mixture. It was also observed that fibers can be seriously damaged during the mixing and compaction processes. Finally, it has been found that steel wool fibers do not have a relevant influence on the particle loss resistance and flexural strength of dense asphalt concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.