Abstract
The formulation and trade-off between a control rheological ink and its printability are significant challenges for designing a defect-free extrusion-based 3D printed feedstock of piezoelectric materials. In this study, we explore different strategies, including ink design, printing dynamics, and densification behaviors, to successfully manufacture a dense 3D-printed lead zirconate titanate (PZT) ceramic using material extrusion. First, PZT inks of different solid volumes (50–55 vol%) were designed using an aqueous binder system, and their rheological behaviors were evaluated. Second, the printing dynamics, that is, extrusion pressure, nozzle size, and printing speed, were optimized for printing an optimal ink without defects. Finally, the printed specimens were sintered at 1100–1300 °C in a lead-rich atmosphere. The specimens achieved a relative density of ∼97.59 %, which is close to conventional die-pressed PZT density ∼ 97.79 %, and exhibited similar piezoelectric behavior. This high-density 3D-printed PZT with tailorable design feasibility has potential applications in sensors, actuators, and energy harvesters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.