Abstract

Embracing the fact that one can recover certain signals and images from far fewer measurements than traditional methods use, compressive sensing (CS) provides solutions to huge amounts of data collection in phased array-based material characterization. This article describes how a CS framework can be utilized to effectively compress ultrasonic phased array images in time and frequency domains. By projecting the image onto its Discrete Cosine transform domain, a novel scheme was implemented to verify the potentiality of CS for data reduction, as well as to explore its reconstruction accuracy. The results from CIVA simulations indicate that both time and frequency domain CS can accurately reconstruct array images using samples less than the minimum requirements of the Nyquist theorem. For experimental verification of three types of artificial flaws, although a considerable data reduction can be achieved with defects clearly preserved, it is currently impossible to break Nyquist limitation in the time domain. Fortunately, qualified recovery in the frequency domain makes it happen, meaning a real breakthrough for phased array image reconstruction. As a case study, the proposed CS procedure is applied to the inspection of an engine cylinder cavity containing different pit defects and the results show that orthogonal matching pursuit (OMP)-based CS guarantees the performance for real application.

Highlights

  • Ultrasonic phased array is one of the most widely used imaging modalities in current industrial non-destructive evaluation (NDE) due to its increased flexibility, faster detection speed, higher inspection quality and radiation-free operation [1]

  • To justify the feasibility of compressive sensing (CS) framework to see how it helps for data compression in ultrasonic ultrasonic phased array imaging, a simulationand procedure based on CIVA

  • France) array is provided . procedure based on CIVA software (Version 9.0, Paris, France) is provided

Read more

Summary

Introduction

Ultrasonic phased array is one of the most widely used imaging modalities in current industrial non-destructive evaluation (NDE) due to its increased flexibility, faster detection speed, higher inspection quality and radiation-free operation [1]. CS has found increasing interests in the ultrasonic inspection community, which generally falls into two categories: medical ultrasound of diagnostic sonography [10,11,12,13,14] and guided wave-based NDE applications [15,16,17,18,19,20] For the former, by treating ultrasound signals within the FRI framework, Wagner et al generalized the concept of compressed beamforming following the spirit of Xampling [10]. We applied the CS framework to a general phased array image reconstruction in both time and frequency domain, aiming at verifying the feasibility and potentiality of CS in this field.

Overview of CS
Sparsity of Transform
Reconstruction via Optimization
Simulation Results and Discussion
Simulation Settings
Time Domain Reconstructions
Comparative
MHzreconstruction ascase many of 10
15 MHz in according to thefrom
Frequency
10. Comparative
Results and Images and
Time Domain
18. Comparative
Real Application in Engine Cylinder Cavity Inspection
Itthe is noted dimensions and angles ofand pit angles defects inin
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.