Abstract
This study investigated the feasibility of ultrasonic bonding of a rigid printed circuit board (RPCB) to a flexible printed circuit board (FPCB) with a non-conductive film (NCF) for improving the long-term reliability and lowering the manufacturing cost. Peel tests of the joints were carried out with increasing bonding time to optimize the bonding condition. High-temperature storage and thermal cycling tests were carried out to evaluate the reliability. The RPCB was successfully bonded to the FPCB with NCF using a transverse ultrasonic bonding. The optimum time taken for bonding was 3 sec. The joints with NCF showed a good reliability after the high-temperature storage test at 125°C for 1,000 h and the thermal cycling test for 1,000 cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
