Abstract
Designing a low-cost, compact, yet sensitive planar microwave sensor for complex permittivity measurement is highly desired for numerous applications though quite challenging. Here, in this research, an ultrasensitive planar microwave sensor is proposed which is based on an electric LC structure. The core sensor was fabricated on an FR-4 substrate using a simple fabrication process, then integrated within a polymethylmethacrylate microfluidic channel for straightforward liquid delivery to the sensing region. The resonance frequency of the bare sensor was designed to occur at 4.14 GHz while empty and shifted to 0.88 GHz when deionized water flows into the channel. The sensor response has been characterized for different mixture ratios of methanol and ethanol with deionized water. Next, the complex permittivity of the resulted binary mixtures has been extracted by the Debye model through a least square fitting method. The calculated average sensitivity is 1.45% which stands above most of sensors reported in the literature. Besides, the sensor has a small footprint with dimensions of 3.6 × 3.8 mm^2 making it a suitable candidate for integration with point-of-care testing devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.