Abstract

Arsenic is a very toxic element that must be removed efficiently from aqueous streams. Among the most promising techniques used for the removal of arsenic are separation methods using membranes. In this study, a regenerated cellulose ultrafiltration (UF) membrane and a poly(diallyl dimethyl ammonium chloride) P(DADMAC) were coupled and used in combination to remove As(V) from an aqueous solution. The influences of pH, the polymer:As(V) molar ratio, and the presence of interfering ions such as chloride and sulfate were investigated in arsenic removal via the washing method. The efficient retention of arsenic was observed at pH 7 with a 5:1 polymer:As molar ratio and with an efficiency of approximately 85 % at Z = 10 for P(DADMAC). The maximum retention capacity of As(V) was determined by the enrichment method, and the results indicated that 194 mg of As(V) was removed per gram of polymer. Finally, using enrichment and washing methods sequentially, the sorption–desorption process and regeneration of P(DADMAC) were performed successfully.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.