Ultra-Compact Mode-Division Multiplexed Photonic Integrated Circuit for Dual Polarizations

Abstract

Polarization and mode division multiplexing are powerful tools for large-capacity parallel optical communications. Dual-polarization and mode-division multiplexed silicon photonic integrated circuit with ultra-small footprint is proposed and experimentally demonstrated. The circuits consist of a mode multiplexer, 3-dB power splitter and two demultiplexers which can simultaneously handle TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> , TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sub> , TM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> and TM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sub> mode. Compared with conventional device structure, the device footprint is scaled down via pixelated waveguide meta-structure. The mode multiplexer and the splitter have a footprint of only 6.8 μm × 6 μm and 6 μm × 5.25 μm, respectively. The fabrication tolerance on the nanohole size variations are studied, and the fabricated devices are systematically characterized. The measured insertion losses of the multiplexer and 3-dB power splitter are below 1.4 dB and 4.5 dB for all four modes within the wavelength range from 1530 nm-1570 nm. In the meantime, the measured maximum inter-mode cross talk is below -15 dB over a 30 nm bandwidth. The experimental results also indicate the power imbalance of the splitter is within 0.4 dB from 1530 nm-1570 nm. Since the demonstrated polarization and mode handling devices via pixelated meta-structures occupy significantly smaller chip area than conventional wisdoms, this work shows the potential for large scale and dense integration of polarization and mode division multiplexing system on photonic chip.