Two-stage continuous fermentation of Clostridium acetobutylicum: effects of pH and dilution rate

Abstract

The kinetics of a two-stage continuous fermentation of Clostridium acetobutylicum have been studied. The pH and the dilution rate have been shown to be two essential factors for process optimization. An increase in pH or dilution rate in the first stage decreased solvent production in the second fermentor. To achieve optimal solvent production, the pH had to be maintained at 4.5 in the first stage and between 4.5 and 5.0 in the second stage. Dilution rates of 0.08 h−1 and 0.04 h−1,respectively, in the first and second fermentors allowed a high solvent concentration. When the pH was maintained at 4.5 in each stage and when the dilution rates were 0.08 h−1 and 0.04 h−1 in the first and second fermentors respectively, 21 g/l solvent concentration was achieved. A conversion yield of 0.36 g solvents/g glucose consumed was obtained with total consumption of glucose. Biomass was only produced in the first stage together with 40% of the solvents, indicating that solvent production had to be induced in the first fermentor.