Abstract
Ternary dielectrics with varying composition formed by alloying two binary oxides can enable tunable optical and electrical properties for advanced technological applications. Atomic layer deposition (ALD) gives precise control over ternary dielectric composition through the ability to finely tune the precursor pulsing ratio. This work presents ALD development of Si-rich SixTi1−xO2 dielectrics with varying composition (x), along with spectroscopic and electrical characterization of their properties. Stoichiometry of the SixTi1−xO2 films was determined using X-ray photoelectron spectroscopy. Their composition-dependent refractive index, energy bandgap, and reflectance show promise for diverse optical applications ranging from anti-reflective coatings in photovoltaics to optical waveguides. This work also reports a first comparative study of SixTi1−xO2 films prepared by thermal (T-) and plasma-enhanced (PE-) ALD with varying Si composition and deposition temperatures. Deposition rates of 0.67–0.92 Å/cycle were obtained for SixTi1−xO2 films with x = 0.5–0.91 deposited using PE-ALD at 250 °C, which were higher than that of T-ALD at 200 °C (0.42–0.05 Å/cycle). PE-ALD also exhibited a high deposition rate of 0.81 Å/cycle for SixTi1−xO2 film with x = 0.91 at a low growth temperature of 150 °C. The PE-ALD Si-rich silica–titania films show substantially lower (100×) leakage current densities than the thermally deposited films, along with higher breakdown fields for decreasing deposition temperature. A dielectric constant as low as ∼5 was achieved for PE-ALD SixTi1−xO2 films with high Si (x = 0.91) content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.