Abstract
For the ultrahigh frequency radio frequency identification (UHF RFID) metal tag, it always has the difficulties of compact designing, especially for the conjugate impedance matching, low antenna gain, and fabrication or environmental detuning. In this paper, a tunable compact UHF RFID metal tag is designed based on CPW open stub feed PIFA antenna. By changing the length of the open stub, the impedance of the PIFA antenna could be tuned in a large scale for conjugate impedance matching. The open stub makes it easy to tune the resonant frequency to alleviate the fabrication detuning or the environmental detuning, even after the manufacture. Moreover, the CPW structure of the open stub feed can resist the effects of the metallic surface and increase the antenna gain for the compact PIFA antenna. Modeling analysis and simulation are in good agreement with the measurement results. It showed that the UHF RFID metal tag could be designed compact with good performance based on the CPW open stub feed PIFA antenna.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.