Tritium neutral beam injection on JET: calibration and plasma measurements of stored energy

Abstract

Neutral beam injection (NBI) is a flexible auxiliary heating method for tokamak plasmas, capable of being efficiently coupled to the various plasma configurations required in the Tritium and mixed deuterium-tritium experimental campaign on the Joint European Torus (JET) device. High NBI power was required for high fusion yield and alpha particle studies and to provide mixed deuterium-tritium (D-T) fuelling in the plasma core, it was necessary to operate the JET NBI systems in both deuterium and tritium. Further, the pure tritium experiments performed required T NBI for high isotopic purity and reduced 14 MeV neutron yield. Accurate power calibrations are also essential to machine safety. Previously on JET there have been a number of questions raised on the NBI power calibration, in particular following the Trace Tritium Experiments (TTEs). Operator activities on the tokamak NBI system, including calibrations, were performed in 2020. Following these activities, a series of plasma experiments were devised to further corroborate the T NBI power by comparing the plasma response to the D NBI power. A series of stationary, L-mode plasmas were performed on JET with different beam combinations used in different phases of the same pulse. By comparing the plasma response for D and T NBI it was possible to corroborate the T NBI power calibration using the D NBI power calibration. The stored energy as measured by magnetic diagnostics, corrected for fast particle stored energy, show that the uncertainty in NBI power calibration in T is comparable to that in D.