Abstract

In this work, wear resistance of a Zr61Ti2Cu25Al12 (ZT1) bulk metallic glass (BMG) in dry-sliding and simulated physiological media was investigated using ball-on-flat tribological approach and Si3N4 ball as counterpart. It was indicated that wear resistance of the BMG in air and deionized water is superior to Ti6Al4V alloy but inferior to 316L stainless steel (316L SS) and Co28Cr6Mo (CoCrMo) alloy. However, under simulated physiological media such as phosphate buffered solution (PBS) and Dulbecco's modified Eagle medium with 10vol.% fetal bovine serum (DMEM+FBS), the ZT1 BMG exhibits decreased wear resistance in comparison with the Ti6Al4V, 316L SS and CoCrMo. This is probably associated with its moderate pitting corrosion resistance in the medium containing chloride ions. The presence of protein in the solution has a significant effect to ruin pitting resistance of the BMG, then causing more severe wear damage. Under the dry-wear condition, abrasive wear is a predominant wear mechanism for the ZT1, whereas under deionized water, deterioration induced by abrasive wear can be mitigated. In simulated physiological media, wear deterioration is a typical tribocorrosion controlled by synergistic effects of the abrasive and corrosive wear. For the four investigated metals, wear resistance does not exhibit distinct correlation with hardness, whereas the material with high Young's modulus possesses better wear resistance.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.