Abstract
PurposeTo improve the wear resistance of the sliding boot, the wear-resistant Fe-21 Wt.% Cr-5 Wt.% B alloy is prepared, and the wear mechanism is studied under dry sliding condition.Design/methodology/approachThe anti-wear Fe-21 Wt.% Cr-5 Wt.% B alloy is prepared by powder metallurgy technique. The tribological behavior of Fe-Cr-B alloy sliding against ASTM 1045 steel pin is studied at 30-60 N and 0.03-0.12 m/s using a reciprocating pin-on-disk tribometer under dry sliding condition. Meanwhile, the ASTM 5140 and 3316 steel are studied as compared samples.FindingsThe friction coefficients of tested specimens increase with the increasing normal load. However, this effect is the opposite in case of different sliding speeds. The specific wear rates increase as the sliding speed and normal load increase. The Fe-Cr-B alloy shows the best tribological properties under the dry sliding condition and the wear mechanism is mainly ploughing.Originality/valueThis wear-resistant Fe-21 Wt.% Cr-5 Wt.% B alloy can replace the traditional materials to process the sliding shoes and improve the service life of coal mining machine.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
