Abstract
In this research study, textured tools were fabricated and used for machining under different cooling conditions. The most important uniqueness of the work lies in the use of textured tools for machining Inconel-718 under dry, Nitrogen cooling and nanofluids (hBN mixed with minimum quantity lubrication) conditions. In the turning experiments, two different level of cutting speed i.e., 75 and 125 m/min and a constant level for feed rate (0.1 mm/rev) and depth of cut (0.5 mm) were considered. The above three conditions were tested and compared with and without the use of textured tools. The tool wear, surface roughness, cutting temperature, micro-hardness of machined samples and chip morphology were investigated under these subjected conditions and at turning parameters. The results demonstrated that the nanofluids with textured tool provide the superior results in comparison with other cooling conditions. These results establish textured tools as a sustainable alternative to the existing cutting tool technology being used in the manufacturing industry.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
