Abstract

The study investigated the performance of chitosan and extracted pandan leaves towards treatment of textile wastewater by using flocculation process. Pandan leaves were extracted by using solvent extraction method. Flocculation process was conducted using a Jar test experiment. The effect of dosage, pH, and settling time on reduction of COD, turbidity and color of textile wastewater was studied. The results obtained found that chitosan was very effective for reduction of COD, turbidity, color and indicator for color. The best condition for COD and turbidity removal was achieved at 0.2 g dosage, pH 4 and 60 minutes of settling time. Under this condition, about 58 and 99% of COD and turbidity was removed, respectively. However, the results obtained using extracted pandan was opposite compared to the chitosan. Extracted pandan was not able to remove both COD and turbidity of the waste.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.