Abstract
Due to higher critical current density and better self-protection, no-insulation (NI) high-temperature superconducting (HTS) coils wound by REBCO coated conductors have been widely studied and used in various superconducting magnets. When HTS coils are applied in rotating machines and high filed magnets, epoxy resin impregnation is indispensable to improve their mechanical stability. However, the use of epoxy resin may cause delamination problems and increase the turn-to-turn characteristic resistance when the epoxy penetrates through the winding turns. Although the solder impregnation method has been demonstrated to enhance the mechanical robust of NI coils, the solder needs to be heated and melted into a liquid before it can be used, which makes the impregnation process extremely inconvenient. The gallium−indium−tin (GaInSn) alloy is liquid at room temperature with a melting temperature of 10.5 °C. Therefore, GaInSn liquid metal alloy can be applied as impregnation material, which makes the impregnation process more convenient. In this article, NI HTS coils with and without GaInSn impregnation are fabricated and tested for comparison. The transient electrical characteristics including charging and sudden-discharging tests are conducted at 77 K. The critical current experiment shows that the conductor of the impregnated coil can be reused. These results can provide useful data for the potential application of GaInSn impregnated NI HTS coils.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
