Abstract
Medium-Mn steels possess an exceptional strength-ductility balance but normally relatively low yield strength, which hinders their practical applications especially in ultra-high strength structural components. In this study, the simultaneous addition of Ti and Mo was proposed to improve the yield strength of medium-Mn steels, together with the systematic experimental and theoretical investigations on the precipitation behavior of (Ti, Mo)C carbides and its effects on the microstructure-properties relationship. The addition of Ti and Mo increases yield strength by 150∼350 MPa and ultimate tensile strength by 55∼320 MPa without a significant loss of ductility. Based on the intercritically annealed microstructure close to equilibrium as well as the nucleation and growth kinetic theory, the Ti–Mo addition can reduce the fraction of austenite, but increase the mechanical stability of austenite by refining the mean grain size of austenite. Mo was found to increase the precipitate density of (TixMo1-x)C by lowering the interfacial energy between the nano-precipitates and the matrix, and reduce the mean size of precipitates. A maximum increment in yield strength (∼350 MPa) was achieved at 610 °C, which was mainly attributed to the combined effects of grain refinement and precipitation hardening due to the addition of Ti and Mo.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
