Abstract
A planar miniaturized Clark-type oxygen sensor based on the Ross principle has been produced by means of thin-film technology. The use of a polarizable counter electrode in a three-electrode configuration allows the regeneration of the cathodically consumed oxygen, resulting in a zero-flux amperometric oxygen sensor. The platinum working and counter electrodes and the Ag/AgCl reference electrode were covered with a photostructured hydrogel layer, forming the electrolyte compartment, and a photostructured hydrophobic gas-permeable membrane. This arrangement exhibits no oxygen consumption and therefore the signal of the sensor shows almost no flow dependence. Additionally, this electrochemical feature leads to a dynamic equilibrium of the reaction products in the hydrogel layer, overcoming the lifetime limitations caused by buffer degradation in the classical Clark principle. The sensor was tested in buffer solutions and bovine serum, showing excellent performance and no effects of fouling on sensor response. This device can be scaled down and is best suited for integration with other sensors and as a basic transducer for biosensors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.